Rev-A-Shelf 6572 Series Almond 11"L x 2-1/8"D x 3-13/16"H x Sink Tip Out Tray, No Tab Stop - 6572-11-15-40
Description
Choose a sink tip out tray
sink tip out tray from Rev-A-Shelf is a molded polymer insert made for the false front area at a sink cabinet. This Rev-A-Shelf sink tip out tray is the 6572 Series almond kit and measures 11 inches long, 2-1/8 inches deep, and 3-13/16 inches high. The kit is built around a standard depth sink tip out tray format, which helps buyers match common sink front spaces without moving to a deeper tray style. It also works well for buyers looking for a sink tip out tray kit that includes both an open tray and a sink tray with ring holder. The trays in this 6572 Series set do not have tab stops, so buyers should confirm that detail against their preferred sink front hardware and opening style before ordering.
Use this sink front tray better
- Rev-A-Shelf molded polymer sink tip out tray - Polymer construction gives buyers a practical tray material for sink front storage use.
- Almond finish - The almond color helps buyers match or coordinate with cabinet interiors and accessory layouts.
- 11 inch tray length - The verified length helps buyers check fit against the available sink front opening before purchase.
- 2-1/8 inch standard depth - Standard depth supports buyers who need a sink front tray for typical shallow false-front storage space.
- 3-13/16 inch tray height - The listed height gives installers a clear dimension to review during fit planning.
- 6572 Series kit includes two trays - The kit format gives buyers both a general-use tray and a separate accessory tray in one package style.
- One open tray included - The open tray gives quick access to small sink-area items that need to stay close at hand.
- One accessory tray with ring holder and built-in soap dish - The accessory tray helps organize jewelry and sink-side items in a dedicated compartment.
- No tab stops on the trays - Buyers can review this tray style against their preferred installation method and hardware setup before ordering.
Confirm sink tip out tray fit
Key specs to confirm: This almond sink tip out tray is a Rev-A-Shelf 6572 Series kit with a listed size of 11 inches long, 2-1/8 inches deep, and 3-13/16 inches high. The web description identifies this as a standard depth sink tip out tray. Before ordering, confirm the false front opening width, inside clearance behind the sink front, and whether your cabinet can accept this tray height and depth. This product is described as a no tab stop tray, so hinge style and opening travel should also be checked. Safety, load, compliance, and any hardware-specific installation details are not provided here and should be confirmed with manufacturer documentation.
What's included: Verified product data states that the 6572 Series kit includes two trays: one open tray and one accessory tray with a ring holder and built-in soap dish.
What to verify before ordering: Check sink front width, tray depth clearance, tray height clearance, hinge compatibility, and whether you want a no tab stop tray style. Also confirm that the almond color and two-tray kit format match your cabinet plan.
Match a Rev-A-Shelf sink tip out tray
Use a sink tip out tray daily
A sink tip out tray is often used when the false front under a sink is otherwise wasted space. For a professional installer, this product can help add a small but useful storage point near the sink without changing the cabinet box. For a serious DIY buyer, the value is simple access to small items that tend to drift around the sink area, such as rings, scrub tools, or soap-related accessories. This Rev-A-Shelf sink tip out tray is part of the 6572 Series value line of plastic sink tip out trays, and the verified kit includes two tray styles for different day-to-day tasks.
The open tray works for general sink-side storage where quick reach matters. The accessory tray adds a ring holder and built-in soap dish, which can help separate jewelry or small personal items from wet sink tools. Buyers searching for a sink front accessory tray or sink tray with ring holder are usually trying to keep these items from being left on the countertop edge or near standing water. Because this is a standard depth sink tip out tray at 2-1/8 inches deep, it is aimed at shallow sink front applications rather than deep storage needs.
Fit planning matters more than appearance alone. The listed dimensions are 11 inches long, 2-1/8 inches deep, and 3-13/16 inches high, so the buyer should compare those measurements to the usable space behind the false front. The product data confirms that these trays do not have tab stops. If your sink front hardware or opening preference depends on tab stops, that is a point to verify before purchase. Buyers looking for a replacement sink tip out tray should also check whether they are replacing only a tray or matching an existing hinge setup, since hinge details are not provided in the verified product data for this page.
Compare this plastic sink tip out tray
When buyers compare sink front tray options, the main differences usually come down to tray depth, tray length, included accessory layout, and whether the tray style uses tab stops. This Rev-A-Shelf sink tip out tray gives a clear set of verified details that make comparison easier. It is a molded polymer tray kit in almond, it uses a standard 2-1/8 inch depth, and it includes two tray types rather than a single tray format. That helps buyers who want one open storage area plus one accessory-focused tray in the same order.
Another useful comparison point is clarity of use. Some sink trays are plain inserts only, while this kit includes one accessory tray with a ring holder and built-in soap dish. For buyers organizing a sink cabinet for daily use, that distinction matters because it changes how the tray can be used once installed. The no tab stop design is also an important product-style detail to compare against existing cabinet hardware and opening preferences. Rather than assuming all sink front trays install the same way, buyers should confirm how this no tab stop format aligns with their cabinet setup.
Rev-A-Shelf is clearly identified as the brand, and the product is clearly identified as a sink tip out tray kit in the verified data. That brand and product-type clarity helps installers, purchasing teams, and shop staff order the correct tray style with fewer assumptions. If you are comparing options for a new install or a replacement sink tip out tray, the practical path is to match the 11 inch length, standard depth, tray height, no tab stop design, and included accessory layout to the cabinet in front of you.
Ask key sink front tray questions
What type of product is this Rev-A-Shelf item?
Rev-A-Shelf sink tip out tray is a molded polymer sink front tray kit for the false front area of a sink cabinet.
What are the dimensions of this sink tip out tray?
Rev-A-Shelf sink tip out tray measures 11 inches long, 2-1/8 inches deep, and 3-13/16 inches high.
Will this sink front tray fit any sink cabinet?
This sink front tray fits only where the false front opening and inside clearance match the listed tray dimensions. Follow manufacturer installation guidance and local building requirements where applicable.
Does this kit include more than one tray?
This sink tip out tray kit includes two trays: one open tray and one accessory tray with a ring holder and built-in soap dish.
Does this tray have tab stops?
This Rev-A-Shelf sink tip out tray is described as having no tab stops, so buyers should confirm that style against their hardware setup.
Is this a standard depth sink tip out tray?
This sink tip out tray is identified in the product description as a standard depth tray with a 2-1/8 inch depth.
What color is this replacement sink tip out tray?
This replacement sink tip out tray is almond, which buyers can compare to their cabinet interior and accessory color plan.
Are hinges included with this product?
Included hinge details are not clearly verified in the product content provided here, so buyers should confirm included hardware before ordering.
What should I measure before ordering a sink tray with ring holder?
This sink tray with ring holder requires buyers to measure false front width, inside depth, inside height, and hinge compatibility before ordering.
Order the right almond sink tip out tray
almond sink tip out tray is a practical choice when you need organized storage in the sink false front and want a verified two-tray Rev-A-Shelf kit. This product includes one open tray and one accessory tray with a ring holder and built-in soap dish. Before purchase, confirm the 11 inch length, 2-1/8 inch depth, 3-13/16 inch height, and the no tab stop tray style against your cabinet opening and planned hardware. A quick fit check helps avoid ordering the wrong sink front tray for your install.
