Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
sink tip out tray adds usable storage behind a false sink front in kitchen and bath cabinets. The Rev-A-Shelf sink tip out tray in the 6572 Series is a molded polymer set in almond that includes two trays and four hinges for a practical sink tip out tray kit. One tray is open, and one accessory sink front tray includes a ring holder and built-in soap dish. This plastic sink tip out tray is listed at 14 inches long, 2-1/8 inches deep, and 3-13/16 inches high. Because this version does not include tab stops, buyers planning a sink tray replacement or new install should confirm their cabinet front, hinge placement, and desired tray style before ordering.
Key specs to confirm: This Rev-A-Shelf sink tip out tray is listed as 14 inches long, 2-1/8 inches deep, and 3-13/16 inches high. It is part of the 6572 Series value line of plastic sink tip-out trays with standard depth. Before purchase, confirm the false sink front width, the inside clearance behind the panel, and whether the tray height will clear plumbing or other obstructions. This model is described as having no tab stops, so confirm that detail against your installation preference. Safety, load, compliance, and any additional installation limits are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified included items are two trays and four hinges. The two trays consist of one open tray and one accessory tray with ring holder and built-in soap dish.
What to verify before ordering: Check your sink front opening size, available depth behind the false front, hinge mounting area, and whether an almond plastic tray matches the cabinet interior and application. Confirm that a no-tab-stop tray is acceptable for your project.
A kitchen sink tip out tray is commonly used when the false drawer front below the sink has open space behind it that would otherwise go unused. Buyers often want a simple place to keep small sink area items without taking up room in the base cabinet. This Rev-A-Shelf sink tip out tray addresses that use case with two molded polymer trays in one kit. One tray is open for general small-item storage, while the accessory sink front tray adds a ring holder and built-in soap dish for buyers who want more organized storage near the sink.
This format can also help during a sink tray replacement project. If an older tray is cracked, missing, or no longer matches the hardware layout, a sink tip out tray kit with trays and hinges can simplify the parts list. Because the verified package includes four hinges, buyers have the main listed components needed for the tray setup. The almond sink tip out tray finish may also matter when matching visible cabinet interiors or existing accessories.
Fit remains the key issue with this product type. The listed tray dimensions are 14 inches long, 2-1/8 inches deep, and 3-13/16 inches high, but those numbers should be checked against the actual false front and the space behind it. Plumbing lines, sink bowls, clips, and cabinet rails can reduce usable space. This version is also identified as having no tab stops, which can affect how a buyer expects the tray to open and rest in use. For that reason, installers and serious DIY buyers should confirm cabinet construction, hinge location, and tray clearance before finalizing the order.
In a bath vanity or kitchen sink base, a plastic sink tip out tray can be a practical way to store rings, sponges, or other compact items close to where they are used. The product data confirms molded polymer trays and a standard depth format for the series, which helps buyers compare this tray against deeper or differently shaped alternatives only after they verify available space.
When buyers compare sink front tray products, the first differences usually involve tray style, included parts, and dimensions. This Rev-A-Shelf sink tip out tray is clearly defined as a two-tray kit with four hinges, rather than a single tray only. That matters for buyers who want one open tray plus one accessory tray without assembling a mixed set from separate parts. The accessory tray includes a ring holder and built-in soap dish, which gives it a more task-specific layout than a plain open tray.
Another point of comparison is material. This product is part of a value line of plastic sink tip-out trays and is described as molded polymer. Buyers who prefer a molded tray style can use that fact to narrow their search. The listed standard depth of 2-1/8 inches is also useful when comparing sink tray replacement options, because depth is often the first dimension that causes interference behind a false front.
Brand consistency can also help with repeat installs. Rev-A-Shelf is the stated brand, and the product naming clearly identifies the tray type, size, color, and included hardware. That makes it easier for contractors, cabinet shops, and maintenance buyers to reorder the same general setup when matching prior projects. At the same time, this product page does not provide every fit detail, so buyers should still verify cabinet opening dimensions, available interior clearance, and installation guidance before purchase. Following manufacturer installation guidance and local building requirements where applicable helps avoid preventable fit issues with this product type.
This sink tip out tray does not fit every cabinet. Buyers should confirm the false front size, interior clearance, and plumbing obstructions before ordering.
The Rev-A-Shelf sink tip out tray includes two trays and four hinges. One tray is open, and one accessory tray has a ring holder and built-in soap dish.
This sink front tray is listed at 14 inches long, 2-1/8 inches deep, and 3-13/16 inches high.
This Rev-A-Shelf 6572 Series tray is described as having no tab stops. Buyers should confirm that style matches their installation preference.
This product is a sink tip out tray kit. The verified package includes two trays and four hinges.
This sink tray replacement may work if your cabinet opening and available space match the listed dimensions and hinge setup.
This kitchen sink tip out tray is described as molded polymer plastic in an almond color.
The sink front tray needs clearance behind the false front. Buyers should check plumbing, sink bowls, clips, rails, and hinge mounting space.
This sink tip out tray is listed in kitchen and bath cabinet accessories, so buyers can consider it for either application if fit is confirmed.
This sink tip out tray should be installed by following manufacturer installation guidance and local building requirements where applicable.
sink front tray selection is easier when you match the listed size, included hardware, and tray style to the cabinet in front of you. This Rev-A-Shelf sink tip out tray includes two almond molded polymer trays and four hinges, with one open tray and one accessory tray. Before you buy, confirm the 14 inch length, 2-1/8 inch depth, 3-13/16 inch height, and the no-tab-stop design against your false front opening, interior clearance, and installation method.
Sold In: 1 Pair
