Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
sink tip out tray is a Rev-A-Shelf molded polymer sink front tray made for sink base cabinet fronts where shallow storage is needed. This Rev-A-Shelf sink tip out tray is the 6581 Series tray in almond and measures 11 inches long, 2-1/8 inches deep, and 3-13/16 inches high. It fits buyers looking for a standard depth sink tray rather than a deeper organizer. The tray is sold as the tray only and is described as a no tab stop design. For a sink tip out tray replacement, these verified dimensions help you compare the existing opening and available space behind the sink front. The almond finish can also help when matching a cabinet sink tray to other light-toned interior parts.
Key specs to confirm: This Rev-A-Shelf sink tip out tray is listed at 11 inches long, 2-1/8 inches deep, and 3-13/16 inches high. It is an almond 6581 Series standard molded polymer sink front tray with no tab stop. Before purchase, confirm the inside width of the sink front panel, the available depth behind the false front, and the clearance around plumbing or sink bowls. If you are replacing an existing cabinet sink tray, compare these dimensions to the old tray and your current hinge or tip-out hardware. Safety, load, compliance, and any installation hardware details are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified listing details support one Rev-A-Shelf 6581 Series almond sink tip out tray. Hardware, hinges, and additional accessories are not stated in the product data and should be confirmed before ordering.
What to verify before ordering: Check tray length, tray depth, tray height, sink front opening size, hardware compatibility, and whether your application requires a tray with or without tab stops. Also confirm whether you need a single standard tray or an accessory-style tray from a different series.
A kitchen sink tip out tray is commonly used behind a false sink front to create shallow storage in space that would otherwise go unused. Buyers usually look for this product when replacing a cracked tray, updating a worn cabinet sink tray, or adding a simple organizer to a sink base front. In those cases, the main concern is not just the tray itself. The real issue is fit. A tray that is too long can interfere with the opening width. A tray that is too deep can hit plumbing or the back of the panel area. A tray style that does not match the existing hardware can slow down installation.
This Rev-A-Shelf sink tip out tray addresses the selection process with clear verified dimensions and a clear product identity. It is an 11 inch sink front tray with a 2-1/8 inch standard depth and a 3-13/16 inch height. That makes it useful for buyers who need a standard depth sink tray rather than a deeper storage insert. The product data also identifies it as a molded polymer sink tray in almond, which helps when replacing a visible tray and trying to keep the cabinet interior consistent.
Another practical use case is bath cabinetry. A sink front tray can also be used in many bathroom vanity false fronts if the opening and clearance match the tray dimensions. Because this product is described as a no tab stop tray, buyers should confirm whether their existing setup expects that exact tray style. If you are ordering for new construction or a cabinet shop project, verify hinge and mounting hardware requirements before purchase because those details are not included in the verified data. For replacement work, compare the old tray dimensions first and confirm that plumbing lines or sink clips will not interfere with the standard depth sink tray once installed.
When buyers compare sink tip out tray options, the first differences usually come down to tray style, dimensions, and whether the tray is a standard compartment or an accessory version. This Rev-A-Shelf tray is identified as part of the 6581 Series, which the verified description lists as standard molded polymer sink front trays. That matters because some buyers may be looking at accessory trays with built-in ring holders or soap dish layouts from another series, while others just need a straightforward open tray format.
The benefit of choosing by verified series and dimensions is consistency. A clearly identified Rev-A-Shelf sink tip out tray gives installers and cabinet professionals a direct reference for the tray type, color, and size. The almond finish, 11 inch length, and standard 2-1/8 inch depth make this easier to compare against an existing application than a generic listing with limited data. The no tab stop note is also important because small hardware differences can affect replacement success.
For buyers deciding between a generic tray and a named brand tray, the practical advantage here is simple product clarity. The product data specifies the brand, the series, the tray type, and the dimensions. That makes it easier to order for cabinet service work, punch-list repairs, or planned installations where you need repeatable parts information. If your project requires hinges, mounting hardware, or accessory compartments, confirm those details separately before ordering, because this listing verifies the tray itself but does not verify included hardware or accessory pieces.
This sink tip out tray fits only where the false front opening and behind-panel clearance match the 11 inch by 2-1/8 inch by 3-13/16 inch tray size.
This Rev-A-Shelf sink front tray is listed as a standard depth tray with a 2-1/8 inch depth.
This product data verifies the tray only. Hardware and hinges should be confirmed before ordering.
This Rev-A-Shelf sink tip out tray is almond.
This sink tip out tray replacement can work if your existing tray size, tray style, and hardware setup match this no tab stop 6581 Series tray.
This sink front tray is identified as a no tab stop design. Confirm that your hardware and replacement tray style require that exact configuration.
This cabinet sink tray may work in a vanity if the false front opening and available depth match the listed tray dimensions.
This Rev-A-Shelf 6581 Series product is described as a standard molded polymer sink front tray, not the accessory tray series or two-tray kit.
This kitchen sink tip out tray should be checked for length, depth, height, hardware compatibility, and plumbing clearance. Follow manufacturer installation guidance and local building requirements where applicable.
sink front tray selection is easier when the size and tray style are clear. This Rev-A-Shelf sink tip out tray is an almond 6581 Series molded polymer tray with verified dimensions of 11 inches long, 2-1/8 inches deep, and 3-13/16 inches high. Before you buy, confirm that your false front opening, behind-panel clearance, and hardware setup match this no tab stop tray design. Included components are only verified for the tray itself, so check hardware needs separately to avoid delays on installation or replacement work.
Sold In: 40 Each
