Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
sink tip out tray is a practical way to add shallow storage behind a sink front panel. This Rev-A-Shelf sink tip out tray is a molded polymer sink tray in white, sized at 11 inches long, 2-1/8 inches deep, and 3-13/16 inches high. It fits buyers looking for a standard depth sink tip out tray for a new build or a sink tip out tray replacement. The Rev-A-Shelf 6581 Series uses a standard molded polymer design and this version does not include a tab stop. For buyers checking sink tip out tray dimensions before a sink tip out tray install, the listed length, depth, and height help narrow fit before ordering.
Key specs to confirm: This Rev-A-Shelf sink tip out tray measures 11 inches long, 2-1/8 inches deep, and 3-13/16 inches high. It is a white molded polymer tray from the 6581 Series and is described as a standard depth sink tip out tray. Before purchase, confirm the sink front panel width, the interior clearance behind the panel, and whether your planned hardware setup requires a tray with or without a tab stop. If you need safety, load, compliance, or other technical details, those are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified data identifies this item as one Rev-A-Shelf 6581 Series standard molded polymer sink front tray in white. Hardware is not listed in the verified product data, so included installation parts should be confirmed before ordering.
What to verify before ordering: Check tray length against your sink front opening, confirm the 2-1/8 inch depth works in your cabinet, verify needed height clearance, and make sure a no tab stop tray matches your intended installation or replacement setup.
A sink front tray is commonly used in the false drawer area in front of a sink, where space is shallow and full drawers are not possible. Buyers often want a place for small sink-side items without taking up room in the main cabinet below. In that setting, this Rev-A-Shelf sink tip out tray provides a simple molded polymer tray format sized for shallow storage.
This product is a good fit for buyers who already know they need an 11 inch tray and want a standard depth sink tip out tray. The verified dimensions matter because tip-out spaces vary from cabinet to cabinet. A tray that is too long may not fit the sink front opening. A tray that is too deep can interfere with the sink bowl or hardware area behind the panel. A tray that is too tall may create clearance issues depending on the available interior space. That is why sink tip out tray dimensions should be checked before ordering, especially for a sink tip out tray replacement.
The 6581 Series is described as a standard molded polymer sink front tray. That tells buyers this is the plain tray style rather than the accessory tray style found elsewhere in the broader product family. If your goal is basic storage in a sink front panel, that plain tray format may be the correct choice. If you expected built-in accessory sections such as a ring holder or soap dish, verify the exact tray type before purchase because those details are associated with other series descriptions, not this 6581 tray.
Another practical point is the no tab stop design. For a sink tip out tray install, buyers should confirm whether their chosen hardware and cabinet setup require a tray with tab stops or without them. The verified product name and description clearly identify this tray as no tab stop, so that detail should be treated as an important fit check rather than a minor variation.
For kitchen and bath cabinet work, a white sink tip out tray can also make visual matching easier when replacing an older plastic sink tip out tray. Since this item is sold in each quantities, it can work for single-cabinet projects where a full bulk box is not needed.
When buyers compare sink front tray options, the first difference is usually tray type. Some trays are plain storage trays, while others include accessory sections. This Rev-A-Shelf sink tip out tray is identified as a standard molded polymer sink front tray, so it is aimed at buyers who want the basic tray format.
The next comparison point is size. For this product type, length, depth, and height drive fit more than appearance. This tray has verified dimensions of 11 inches long, 2-1/8 inches deep, and 3-13/16 inches high. Those numbers make it easier to compare against the cabinet opening and the space behind the sink front panel. Buyers looking at a sink tip out tray replacement should compare all three measurements, not just the overall length.
Material also matters in a practical way. This product is a molded polymer sink tray. For buyers who want a plastic sink tip out tray, that gives a clear material reference without adding unverified claims. The white finish is another straightforward identifier that helps match existing cabinet accessories or replacement trays.
Brand consistency can also matter when ordering cabinet accessories. Rev-A-Shelf is the verified brand for this tray, and the product is part of the 6581 Series. That helps buyers identify the correct family when matching an existing tray or keeping parts consistent across a project. At the same time, installation hardware, mounting details, and exact compatibility with specific hinges or tip-out mechanisms are not listed in the verified data here, so those details should be confirmed before final purchase.
In short, the strongest comparison points for this item are simple and factual: it is a Rev-A-Shelf sink tip out tray, it is white molded polymer, it is a standard depth sink tip out tray, it measures 11 inches by 2-1/8 inches by 3-13/16 inches, and it has no tab stop. Those are the details that help reduce ordering mistakes.
This Rev-A-Shelf product is a 6581 Series sink tip out tray made as a standard molded polymer sink front tray.
This sink tip out tray measures 11 inches long, 2-1/8 inches deep, and 3-13/16 inches high.
This Rev-A-Shelf sink tip out tray is described as standard depth, with a verified depth of 2-1/8 inches.
This sink front tray is identified as a no tab stop design, so buyers should confirm that matches their hardware setup.
This Rev-A-Shelf sink tip out tray is a molded polymer tray, which is a plastic tray format.
This sink tip out tray fit depends on your panel opening, interior clearance, and hardware setup. Compare your space to the listed 11 inch length, 2-1/8 inch depth, and 3-13/16 inch height.
Included hardware is not listed in the verified product data, so installation parts should be confirmed before ordering.
This Rev-A-Shelf tray can work as a sink tip out tray replacement when the dimensions and no tab stop format match your existing setup.
This sink front tray is listed under kitchen and bath cabinet accessories, so it is intended for that cabinet accessory use. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf sink tip out tray is a straightforward choice when you need a white molded polymer sink front tray in an 11 inch length. Before you buy, confirm the 2-1/8 inch depth, 3-13/16 inch height, and no tab stop design against your cabinet opening and hardware plan. Verified product data identifies this item as a single 6581 Series standard tray, while installation hardware is not confirmed here. A quick fit check now helps avoid replacement delays and ordering errors.
Sold In: 40 Each
