Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
sink tip out tray helps turn the false front area at a sink cabinet into usable storage for small items that are easy to lose at the sink. This Rev-A-Shelf sink tip out tray is a white molded polymer tray kit in the 6572 Series. The kit includes two trays and two hinges, which supports buyers looking for a sink tip out tray kit or a tip out tray with hinges in one package. One tray is open, and the second is an accessory tray with a ring holder and built-in soap dish. With a standard 2-1/8 inch depth and a 14 inch length, this kitchen sink tip out tray is built for sink front use where those dimensions match the cabinet opening and installation plan.
Key specs to confirm: This Rev-A-Shelf sink tip out tray is listed at 14 inches long, 2-1/8 inches deep, and 3-13/16 inches high. Buyers should confirm the sink front opening, available clearance behind the false front, and whether a standard-depth tray works in the cabinet. Because this is a tray kit with no tab stops, confirm that this tray style matches the intended hardware setup and user preference. If the cabinet is at a kitchen or bath sink, check for plumbing or sink bowl interference before ordering. Safety, load, compliance, and any installation limitations are not stated in the verified product data and should be confirmed with the manufacturer or technical documentation.
What's included: The verified kit includes two trays and two hinges. The two trays are one open tray and one accessory tray with a ring holder and built-in soap dish.
What to verify before ordering: Confirm the cabinet false front size, the 14 inch length requirement, the 2-1/8 inch depth clearance, the 3-13/16 inch height space, sink and plumbing clearance, and whether you need a tray style without tab stops.
A sink tip out tray is commonly used when the false drawer front below a sink has open space behind it that could hold small items. In many kitchens and baths, that area becomes wasted space because cleaning tools, rings, sponges, or soap have no defined place. This Rev-A-Shelf sink tip out tray addresses that use case with a kit that includes two trays and two hinges, making it suitable for new installs or sink tray replacement work where the old tray or hardware needs to be updated.
For a kitchen sink tip out tray application, the accessory tray can help keep a ring holder and soap dish area near the sink, while the open tray gives a second storage option in the same package. For a bath sink tip out tray application, buyers may use the same tray types for small personal items, but fit still depends on the cabinet opening and the space behind the sink front. Because the verified data gives exact tray dimensions of 14 inches long, 2-1/8 inches deep, and 3-13/16 inches high, those measurements should be checked against the cabinet before purchase.
Professional installers often look for consistency in replacement parts. A Rev-A-Shelf sink tip out tray gives a clear product identity, a known tray style, and included hinges in the package. Buyers should still confirm whether the cabinet front, hinge placement, and available clearance are suitable for a tray with no tab stops. If the project involves an older cabinet, a sink front tray may fit the opening size but still require confirmation of plumbing clearance or front-panel movement. The practical benefit of this plastic sink tip out tray is simple: it helps convert hidden sink-front space into organized storage when the cabinet dimensions and hardware approach match the product.
When buyers compare sink tray replacement options, the first question is usually not style. It is fit. A plastic sink tip out tray like this one gives a straightforward format with verified dimensions and a defined kit contents list. That makes it easier to compare against other tray lengths, depths, or tray-only orders without assuming extra hardware is included.
This Rev-A-Shelf sink front tray also stands out for its kit format. The verified package includes two trays and two hinges, which can simplify ordering for buyers who want a matched set from one manufacturer. One tray is open, and one is an accessory tray with a ring holder and built-in soap dish. That combination may be useful for buyers who want more than a plain compartment at the sink front.
Another comparison point is tray style. The verified description states that these trays do not have tab stops. That matters because buyers may be replacing an existing sink tip out tray with a specific movement or stop preference. Rather than assuming interchangeability, it is better to confirm the cabinet front action and the desired tray behavior before ordering. In generic comparison terms, a buyer choosing a sink tip out tray should look at tray length, depth, included hardware, tray configuration, and whether the tray style matches the installation plan. This product gives clear answers on those points where verified data is available, while leaving room for the buyer or installer to confirm cabinet-specific fit details.
This sink tip out tray fits only where the cabinet opening and behind-front clearance match the verified 14 inch length, 2-1/8 inch depth, and 3-13/16 inch height.
This Rev-A-Shelf sink tip out tray kit includes two trays and two hinges, with one open tray and one accessory tray with a ring holder and built-in soap dish.
This Rev-A-Shelf tray kit does not include trays with tab stops, so buyers should confirm that this tray style matches the intended installation.
This sink tray replacement can work where the existing cabinet and sink front accept a 14 inch standard-depth tray and the no-tab-stop design is acceptable.
This sink front tray can be used in kitchen or bath sink cabinets when the cabinet dimensions and sink-area clearance match the verified tray size.
This Rev-A-Shelf sink tip out tray is a white molded polymer tray from the verified 6572 Series description.
Plumbing clearance should be checked before ordering because sink bowls, faucets, and drain parts can reduce the space behind the false front.
This sink front tray should be installed by following manufacturer installation guidance and local building requirements where applicable.
white sink tip out tray buyers usually need clear fit details more than extra marketing language. This Rev-A-Shelf kit includes two trays and two hinges, with one open tray and one accessory tray for sink-area organization. Before purchase, confirm the 14 inch length, 2-1/8 inch depth, 3-13/16 inch height, sink front opening, and behind-front clearance. It is also important to verify that a no-tab-stop tray style matches your cabinet setup and installation plan.
If you are comparing a Rev-A-Shelf sink tip out tray for a new install or sink tray replacement, focus on the verified dimensions, included hinges, and tray configuration. This kit is built around a standard-depth white molded polymer sink front tray format with one open tray and one accessory tray. Confirm cabinet fit and sink-area clearance before ordering so the tray length, depth, and no-tab-stop style align with the project.
Sold In: 1 Pair
