Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
sink tip out tray adds usable storage to the false front area at a sink while keeping small items easy to reach. The Rev-A-Shelf sink tip out tray in this listing is a white molded polymer tray from the 6572 Series. It is sized at 14 inches long, 2-1/8 inches deep, and 3-13/16 inches high. This sink tip out tray kit includes two trays: one open tray and one accessory tray with ring holder and built-in soap dish. Because this is also a practical replacement sink tip out tray option, buyers can use the listed sink tip out tray dimensions to confirm fit before ordering. The tray design does not include tab stops, so installation details should be checked against the hinge setup and sink front application.
Key specs to confirm: This Rev-A-Shelf sink tip out tray is listed at 14 inches long, 2-1/8 inches deep, and 3-13/16 inches high. It is a white molded polymer sink front tray from the 6572 Series. Before purchase, confirm the sink front opening, available clearance behind the false front, and whether your hardware setup is intended for trays without tab stops. If you are replacing an older sink tray with ring holder or soap dish sink tray, compare both tray style and dimensions. Load limits, compliance details, and any installation constraints not shown here should be confirmed with the manufacturer or technical documentation.
What's included: This sink tip out tray kit includes two trays - one open tray and one accessory tray with ring holder and built-in soap dish.
What to verify before ordering: Check tray length, depth, and height against the sink front space. Confirm your application uses a sink tip out tray without tab stops. Verify the hinge arrangement needed for your cabinet front, and make sure the accessory tray layout fits how you want to store rings, soap, or small sink items.
A sink tip out tray is typically chosen by cabinet shops, installers, remodelers, and serious DIY buyers who want to use the false drawer front area in front of a sink. In many kitchens and baths, that narrow space becomes a place to keep small wet-area items that would otherwise sit loose on the counter or get lost inside the cabinet below. A Rev-A-Shelf sink tip out tray like this one gives the buyer a defined storage area in a compact format.
This listing fits buyers who want a sink tip out tray kit rather than a single tray. The verified package includes one open tray and one accessory tray with ring holder and built-in soap dish. That setup can be useful when the goal is to separate general sink items from smaller personal items. For example, the open tray may be used for small cleaning accessories, while the accessory tray can hold a ring and keep soap in a dedicated area. Because the product is white molded polymer, the material and finish are straightforward to identify when matching an existing sink front tray.
Fit is where most ordering mistakes happen with this product type. Buyers should compare the listed 14 inch length, 2-1/8 inch depth, and 3-13/16 inch height to the available space behind the sink front. The no tab stop design also matters. If you are ordering a replacement sink tip out tray, confirm that your cabinet front and hinge arrangement are intended for trays without tab stops. If that requirement is not clear from the jobsite, it should be checked before purchase rather than assumed.
This product can also make sense for buyers standardizing parts across multiple cabinet jobs. The 6572 Series gives a specific series reference, and the included accessory tray details help reduce confusion when comparing a basic sink front tray to a sink tray with ring holder features. When the need is a white sink tip out tray with a shallow profile and a two-tray package, the verified details here provide the main checkpoints needed for selection.
When buyers compare sink front trays, the useful differences are usually material, tray style, dimensions, and what is included. This Rev-A-Shelf plastic sink tip out tray is clearly identified as molded polymer, white, and part of the 6572 Series. It is also clearly described as a two-tray kit rather than a single standard tray. That matters when the project calls for both a simple open compartment and an accessory tray with ring holder and built-in soap dish.
Another comparison point is tray geometry. The listed dimensions give installers a direct way to check whether the tray suits the sink front opening and available interior clearance. Instead of relying on a general category label alone, buyers can use the exact length, depth, and height to avoid a mismatch. The no tab stop design is another practical distinction. Some buyers need that exact tray style to match an existing installation, while others should verify whether their planned hardware arrangement calls for a different tray configuration.
For trade buyers, consistency in product identification also helps. The product name, manufacturer part number, and series information make it easier to reorder or document the same sink tip out tray across jobs. For homeowners and remodelers, the included accessory tray details make the intended use easy to understand without guessing about the package contents. The result is a product listing that supports a careful fit check and a more accurate purchase decision, which is what matters most for this type of cabinet accessory.
Rev-A-Shelf sink tip out tray is a sink front storage tray kit for the false front area at a sink cabinet.
Rev-A-Shelf sink tip out tray dimensions are 14 inches long, 2-1/8 inches deep, and 3-13/16 inches high.
Rev-A-Shelf sink tip out tray kit includes two trays: one open tray and one accessory tray with ring holder and built-in soap dish.
Rev-A-Shelf 6572 Series tray does not have tab stops, so buyers should confirm that detail matches the intended installation.
This replacement sink tip out tray can work when the existing tray size, style, and no tab stop design match your sink front application.
This sink front tray is intended for the false front area at a sink cabinet where tip-out storage is used.
Rev-A-Shelf sink tip out tray is made from molded polymer and finished in white.
Sink tip out tray installations should have hinge compatibility verified before ordering, especially because this tray design does not include tab stops.
The included accessory tray has a ring holder and built-in soap dish for small sink-side items.
Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf sink tip out tray is a practical choice when you need a white molded polymer sink front tray with a two-tray package. Before you buy, confirm the 14 inch length, 2-1/8 inch depth, 3-13/16 inch height, and the no tab stop design against your sink front space and hinge setup. This listing includes one open tray and one accessory tray with ring holder and built-in soap dish, so it is important to verify both fit and tray style before purchase.
Sold In: 20 Pair
