Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2-1/2 inch bore hole grommet from Hughes Supply is a round wire grommet designed to finish and protect a 2-1/2 inch bore hole, so cable pass-throughs in desks, cabinets, or workstations stay clean and controlled. The H-0404-11009/B10 model is a grommet hole liner in white, which visually blends with light-colored surfaces and helps deliver a consistent look across a run of casework. Its role as a grommet hole liner is to shield the cut edge of the 2-1/2 inch hole, which matters for reducing abrasion on sheathing when wires pass through. The 2-3/8 inch inside diameter creates a defined channel for wires, which helps keep multiple cables grouped without binding tightly. The 3 inch overall diameter covers the cutout perimeter, which helps conceal minor chipping around the bore for a cleaner finished opening.
The 2-1/2 inch bore hole diameter ties directly to standard boring setups, so installers can match hole saws or bits to the specified opening and repeat the same size across multiple cabinets or tops. The 3/4 inch hole liner depth indicates how much of the grommet sits inside the panel, which helps determine suitability for common top and panel thicknesses without interfering with nearby components. The 2-3/8 inch inside diameter controls the working space for cables, helping plan how much wiring can pass through each location while still moving freely. The 3 inch overall diameter defines the visible footprint on the surface, which helps in laying out clearances from edges, adjacent cutouts, or hardware on crowded work surfaces.
This white round wire grommet from Hughes Supply fits projects that call for a 2-1/2 inch bore hole and a clean, finished cable opening in desks, counters, or cabinetry. The grommet hole liner format focuses on lining the cut edge, which supports applications where the drilled hole needs protection as wires exit or enter a panel. With a 3/4 inch hole liner depth, the part suits panels where that depth can be accommodated without clashing with internal structures, making it practical for typical tops or vertical panels in multimedia and workspace components. The 3 inch overall diameter gives enough coverage to visually frame the opening on the finished face, which supports neat presentation in office, closet, or garage organization layouts using coordinated openings.
The specified 2-1/2 inch bore hole diameter provides a clear target for boring equipment, which helps crews standardize drilling operations and avoid trial-and-error sizing on site. The 2-3/8 inch inside diameter offers a predictable clearance zone for routing wiring, which assists in planning cable counts per opening and positioning multiple grommets in series for larger harnesses. With a 3/4 inch hole liner depth, the grommet engages the panel edge along a defined length, which contributes to a stable fit in the bore when the matching hole is produced accurately. The 3 inch overall diameter defines the outer footprint, which helps designers space openings relative to adjacent edges, structural members, or other components so the grommet seats flat without overlapping nearby features.
This Hughes Supply grommet is specified for a 2-1/2 inch bore hole, which guides the drilling size needed for a proper fit in work surfaces or cabinet panels.
The grommet hole liner depth is 3/4 inch, so the liner extends three-quarters of an inch into the bored hole, engaging the edge over that length.
The inside diameter is 2-3/8 inches, creating the working opening for routing wires or cables through the grommeted hole.
The overall diameter is 3 inches, so the grommet covers an area wider than the 2-1/2 inch bore, concealing the cut edge and minor tear-out.
The SAP description lists this H-0404-11009/B10 grommet as white, allowing it to visually coordinate with light-colored panels and work surfaces.
This part carries the manufacturer number H-0404-11009/B10 and is described as a Hughes Supply grommet, which helps match it in future orders.
The Hughes Supply H-0404-11009/B10 grommet pairs a 2-1/2 inch bore hole diameter with a 2-3/8 inch inside diameter, giving a defined pass-through opening for cable work. Its 3/4 inch hole liner depth and 3 inch overall diameter create a stable, finished edge around the bore, suited to multimedia and workspace components. For projects calling for a white round wire grommet that matches these dimensions, this model aligns directly with those sizing requirements.
Sold In: 10 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Each |  PGH786WH-X Mfr# H-0786-11009/B10 | Round Wire Grommets, 2-1/2" Bore Hole Plastic Cover Caps with Cut-Out - Hughes Supply H-0786-11009/B10 | ||||
Sold in: 100 Each | PGH786WH Mfr# H-0786-T-11009/C | Round Wire Grommets, 2-1/2" Bore Hole Plastic Cover Caps with Cut-Out - Hughes Supply H-0786-T-11009/C |
