Round wire grommets from Hughes Supply provide a dedicated way to finish a 2-1/2 inch bore hole when routing wires through desks, cabinets, or workspace panels, so the opening stays controlled and looks intentional on completed jobs. This gray grommet is identified as H-0404-T-9192/C, which lets shops and installers reorder the same component whenever matching existing work is important. The part functions as a grommet hole liner around the cutout, helping separate the routed edge from cables and cords as they pass through. A matching grommet cover cap is described separately, so the open liner can be used alone where constant access is needed or paired with a cap when a more closed appearance is preferred at the work surface.
This Hughes Supply grommet is built around a 2-1/2 inch bore hole, so drilling that size creates the basic fit for the liner in wood, laminate, or similar panels. With a 3/4 inch liner depth, the grommet engages into the material to that distance, which matters when working with thinner panels or when avoiding interference with concealed components below the surface. The 3 inch overall diameter defines the flange that rests on the face of the panel, so installers can keep correct edge distances and avoid overlap with other cutouts. The 2-3/8 inch inside diameter then sets the effective opening for wiring, which helps plan how many cords can pass through without crowding.
This gray grommet from Hughes Supply fits into a 2-1/2 inch bore hole, aligning with projects in multimedia and workspace components as well as shelf, closet, and garage organization. The 3 inch overall diameter flange sits on the surface, making it suitable for worktops, cabinet tops, shelves, or closet panels that need a clean cable route. Because the inside diameter is 2-3/8 inch, the opening supports multiple power and data cables in typical office or shop setups, helping consolidate cords in one controlled pass-through point. The 3/4 inch hole liner depth allows the piece to nest into many common panel thicknesses used in cabinetry and organizational systems, so the bore edge is lined along a consistent length.
The defined 2-1/2 inch bore hole diameter provides a clear boring target, so drill operations can be standardized for repeat runs or production work using the same bit size. With the liner depth fixed at 3/4 inch, fabricators can design around predictable engagement into the panel, which helps when routing or machining operations occur near the same opening. The 2-3/8 inch inside diameter sets a reliable clearance for wiring, so planning harness size and cable grouping can follow the same dimension across multiple stations or cabinets. The 3 inch overall diameter aids layout on drawings and templates, since the surface footprint is known and can be spaced precisely from edges, walls, or neighboring cutouts to maintain consistent reveals.
This Hughes Supply grommet uses a 2-1/2 inch bore hole diameter, which sets the drilling size so the liner fits properly into desks, cabinets, or panels.
The grommet liner depth is 3/4 inch, so it extends that distance into the bore, helping protect the cut edge along most common panel thicknesses.
The grommet has a 2-3/8 inch inside diameter, providing the practical opening for cables so cord bundles can pass through without excessive crowding.
The grommet has a 3 inch overall diameter, which defines the surface flange size and helps with layout near edges or adjacent cutouts.
The SAP description specifies this H-0404-T-9192/C grommet as gray, giving a neutral appearance suitable for many worktops and cabinets.
The web description states the grommet hole liner and grommet cover cap are sold separately, so the liner serves as the part that lines the bore hole itself.
This gray 2-1/2 inch bore hole grommet from Hughes Supply offers defined dimensions for bore size, liner depth, inside diameter, and overall diameter, which supports repeatable layouts in shop drawings or on-site work. By using the H-0404-T-9192/C part number, teams can align new installations and follow-up projects to the same gray grommet, keeping openings consistent across desks, cabinets, shelves, or organizational builds. For full box quantity jobs, this liner fits well into production runs where matching bore holes and visible flanges are planned in advance.
Sold In: 100 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 100 Each |  PGH786GY Mfr# H-0786-T-9192/C | Round Wire Grommets, 2-1/2" Bore Hole Plastic Cover Caps with Cut-Out - Hughes Supply H-0786-T-9192/C | ||||
Sold in: 10 Each | PGH786GY-X Mfr# H-0786-9192/BG10 | Round Wire Grommets, 2-1/2" Bore Hole Plastic Cover Caps with Cut-Out - Hughes Supply H-0786-9192/BG10 |
