Round Wire Grommets, 2-1/2" Bore Hole Grommet Hole Liners - Hughes Supply H-0404-2250/BG10

Round Wire Grommets 2-1/2 Bore For Clean Pass-Throughs

Round Wire Grommets 2-1/2 Bore describes a Hughes Supply grommet designed as a hole liner for a 2-1/2 inch bore, so wires pass through a finished opening instead of a raw cutout. The grommet is part of the Hughes Supply Round Wire Grommets line, which keeps the opening controlled to the specified bore size for consistent layout across multiple panels or workstations. The sap description notes an almond color, so the piece visually blends with almond-toned surfaces instead of standing out against them. As a grommet in the Multimedia and Workspace Components category, it suits wire management in desks, counters, and similar work areas where a simple circular opening is needed. Wurth Baer Supply lists the grommet under Shelf, Closet and Garage Organization, supporting use in closets or garage work benches where cable pass-throughs help organize powered tools or low-voltage wiring.

Key Grommet Details That Support Clean Installations

• The web description specifies a bore hole diameter of 2-1/2 inches, so the cutout size is clearly defined and repeatable when drilling multiple panels on a job.
• A liner depth of 3/4 inch is specified, giving a known engagement into the panel that helps the opening feel finished on thicker work surfaces within that depth range.
• The inside diameter is listed as 2-3/8 inches, which leaves a controlled clearance for cables within the 2-1/2 inch bore, helping contain the opening while still allowing wires to pass.
• The overall diameter of 3 inches provides a defined flange size on the surface, covering the raw edge around the bore and giving a neat circular trim detail.
• The description states that the grommet hole liner and grommet cover cap are sold separately, so each component can be selected or replaced individually according to the installation requirement.

Size And Fit Details For Grommet Hole Liner

The bore hole diameter is specified as 2-1/2 inches, so layout starts with a standard 2-1/2 inch cutout that matches common hole saw sizes. The liner depth of 3/4 inch defines how far the liner extends into the bore, which matters when planning for material thickness and avoiding interference with items behind the panel. An inside diameter of 2-3/8 inches defines the usable opening, so cable bundles can be evaluated against that dimension when planning wire capacity through each opening. The overall diameter of 3 inches defines the footprint on the finished surface, which can be helpful when positioning the bore relative to edges or other components to maintain adequate reveal. Together, these dimensions give cabinetmakers and installers clear cutout and spacing information for consistent fit.

Using This Almond Grommet In Work Surfaces

Where This Round Wire Grommet Works Best

This grommet is identified as a Round Wire Grommet in the Multimedia and Workspace Components category, so it suits applications where cables pass through desks, counters, or similar worktops. The category link to Shelf, Closet and Garage Organization supports use in storage and work areas such as closets and garage benches where powered devices or low-voltage lines need a clean path through panels. The 2-1/2 inch bore hole diameter pairs with a 3 inch overall diameter, so the grommet presents a defined ring of trim that can align visually with other circular cutouts or hardware on the same surface. Its almond color, identified in the sap description, lets it coordinate with almond-toned laminates or painted panels, helping the pass-through read as part of the surface instead of a contrasting insert. Because the inside diameter is 2-3/8 inches, it offers a moderate opening suited to typical power cords and data cables used in workstations and organizational systems.

Dimensional Details That Support Repeatable Results

The stated bore hole diameter of 2-1/2 inches means installers can rely on a common hole saw size for every opening, which promotes consistency on production runs or multiple offices. The 3/4 inch liner depth is defined, so the liner position relative to the surface is predictable when cutting into material within that depth range. With a 2-3/8 inch inside diameter, there is a known clearance between the liner wall and the cables, which helps standardize how snug or open each pass-through feels across a project. The 3 inch overall diameter gives a constant outer reference, so spacing from adjacent components or edges can be laid out once and repeated. The manufacturer part number H-0404-2250/BG10 identifies this exact almond 2-1/2 inch bore model from Hughes Supply, which helps shops reorder the same size and color for future phases or matching expansions of an existing installation. Wurth Baer Supply listing it as a grommet hole liner reinforces its role as the finishing element for drilled wire openings.

Common Questions About This Almond Wire Grommet

Select This 2-1/2 Inch Bore Grommet With Confidence

This Hughes Supply Round Wire Grommet with a 2-1/2 inch bore hole diameter, 3/4 inch liner depth, 2-3/8 inch inside diameter, and 3 inch overall diameter gives clear dimensional data for planning desk, closet, or workspace openings. The almond color identified in the sap description suits almond-toned surfaces where a coordinated look is preferred. With the liner and cover cap sold separately, ordering can match specific field needs for new installations or expansions that repeat an existing layout. For projects running through Wurth Baer Supply, using the manufacturer part number H-0404-2250/BG10 ties every phase back to this exact grommet, supporting consistent results across multiple locations.