Round Wire Grommets 2-1/2 Bore For Clean Cable Holes

Round Wire Grommets 2-1/2 Bore describes a Hughes Supply grommet hole liner sized for a 2-1/2 inch bore hole, so drilled openings in work surfaces match the part for a snug, predictable fit. The piece is part of the Hughes Supply Round Wire Grommets line, giving a defined product class that installers can specify consistently across projects. The grommet is white, which helps it blend with light-colored shelves or desks where a neutral appearance is preferred. As a grommet hole liner, it protects the edge of the 2-1/2 inch bore hole, which matters when routing wires or cables through wood or composite panels. The part is categorized under multimedia and workspace components, so it fits naturally into cable management layouts in desks, counters, or workstations. The manufacturer part number H-0404-T-11009/C identifies this exact configuration for repeat ordering and matching on job specs.

Key Grommet Hole Liner Details For Projects

• The bore hole diameter is 2-1/2 inches, so installers can drill a single standard-size opening and know this liner is designed to seat into that cutout for consistent field results.
• The hole liner depth is 3/4 inch, which gives measurable engagement into the panel and helps the liner stay aligned within typical furniture or cabinet top thicknesses.
• The inside diameter is 2-3/8 inches, creating clearance slightly under the bore size so the liner forms a defined edge while still allowing room for routing wires through the center.
• The overall diameter is 3 inches, which covers the perimeter of the 2-1/2 inch bore and overlaps the panel face so the cut edge is hidden for a cleaner finished look.
• The web description specifies that the grommet hole liner and grommet cover cap are sold separately, letting buyers match liners with caps according to specific site needs or replacement situations.

Hole Liner Fit, Dimensions, And Installation Use

This Hughes Supply grommet uses a 2-1/2 inch bore hole diameter, so layout work can be based on a single, repeatable drill size across a run of tops or panels. With a 3/4 inch hole liner depth, the part extends into the hole enough to guide cables while staying within common panel thicknesses, which helps maintain a consistent reveal at the surface. The 2-3/8 inch inside diameter defines the pass-through space for cables or small bundles, so routing plans can account for the available opening. A 3 inch overall diameter means the flange reaches beyond the bore edge, covering minor chipping from drilling and giving a tidy transition from panel to grommet. The grommet is white, aligning visually with many standard laminate or painted surfaces in office or residential workspace installations.

Using This Hughes Supply Grommet In Real Work

Where This Round Wire Grommet Is Typically Applied

This Round Wire Grommets, 2-1/2 inch Bore Hole Grommet Hole Liner from Hughes Supply is categorized under multimedia and workspace components, so it suits desks, counters, and work surfaces where wires pass through. The 2-1/2 inch bore diameter lets fabricators plan a uniform hole size across multiple stations or cabinets, which simplifies drilling and layout on production or onsite jobs. With a 3/4 inch hole liner depth, the grommet engages the panel opening so the cut edge is shielded as cables enter or exit the surface. The 2-3/8 inch inside diameter defines a circular opening that accommodates wire runs sized to that clearance, which helps maintain an orderly pass-through point rather than an oversized cutout. The 3 inch overall diameter creates a modest flange around the bore, so the liner bridges from the hole to the surface and covers the raw edge for a finished appearance in work areas.

Why Dimensions And Separate Cap Matter For Results

The specified bore hole diameter of 2-1/2 inches, paired with the 3 inch overall diameter, sets a clear relationship between drilled hole and visible trim, helping installers predict exactly how much of the opening will be concealed. The 3/4 inch hole liner depth is defined in the web description, giving a clear penetration into the panel so fabricators can choose panel constructions that work well with that depth. The 2-3/8 inch inside diameter controls the cable path, which can reduce lateral movement of wires at the surface and reinforce a cleaner cable presentation. The web description states that the grommet hole liner and grommet cover cap are sold separately, which allows selection of liners and caps to suit different cable routing requirements or replacement needs while retaining the same bore size. Listing under multimedia and workspace components ties this grommet directly to environments where organized cable routing and a clean finished edge are important for daily use.

Common Questions About This Hughes Supply Grommet

Select This 2-1/2 Inch Bore Grommet For Matched Cutouts

This Hughes Supply white grommet hole liner is defined by a 2-1/2 inch bore diameter, 3/4 inch depth, 2-3/8 inch inside diameter, and 3 inch overall diameter, so every drilled opening can be planned around clear dimensions. With a liner sized for multimedia and workspace components, it suits cable pass-through points in desks or work counters where a clean edge and controlled opening matter. Use the manufacturer part number H-0404-T-11009/C when ordering through Wurth Baer Supply to align future work with this exact Round Wire Grommets, 2-1/2 inch Bore Hole Grommet Hole Liner configuration.