Salice Progressa+ 24" Soft-Close Full Extension Undermount Drawer Slides, Zinc - G7U9S610CXF2

Salice Progressa+ 24" Undermount Slides For 3/4" Drawers

Salice Progressa+ 24" undermount drawer slides give a full extension drawer runner that lets a 24 inch drawer open fully, so contents remain accessible along the entire depth and layout space is used efficiently in cabinet runs.

The synchronized mechanism on these Salice America slides coordinates left and right runners, which creates a true progressive action that moves smoothly through the stroke and helps drawers travel evenly under full depth.

Soft-close action on this Progressa+ undermount system controls the final part of the stroke, which helps drawers close gently and supports quieter cabinet operation in kitchens, baths, or shop storage where repeated use is expected.

This runner is designed for 19 mm, or 3/4 inch, drawer material thickness, which suits many plywood and solid drawer box builds and helps installers standardize on common stock thickness in production or retrofit work.

The slides are zinc finished, which provides a hard, uniform surface over the runner components and supports consistent movement of the rack and pinion elements over the life of the installation.

Key Drawer Runner Details That Support Workflow

• The full extension design lets a 24 inch drawer clear the cabinet face, so tools, hardware, or stored items are accessible without reaching, which speeds picking and helps when working in tight cabinet lines.
• A synchronized mechanism with rack and pinion action governs both sides of the runner, so the drawer box tracks straight through the opening, which matters when faces are tight to reveals or adjacent fronts.
• The drawer runner is specified for 19 mm, or 3/4 inch, drawer material thickness, so shop builds using that standard stock can align machining and assembly steps around a single box design.
• Soft-close motion on the Progressa+ system moderates closing speed near the cabinet, which reduces slamming forces on joinery and helps maintain alignment of fronts and gaps over repeated closing cycles.
• Salice America identifies this runner as 100 percent made in Italy, so all manufacturing steps occur under a single origin, which matters when projects call for consistent sourcing by country.
• These slides meet and exceed ANSI BHMA A156.9-2020 Grade 1, so they are tested to that drawer slide performance standard, which supports use in projects where that grade is a specified requirement.

Undermount Slide Fit, Load, And Adjustment Details

This Salice 24 inch undermount drawer slide carries a rated load capacity of 154 pounds dynamic, which relates to drawers that move under load, and 170 pounds static, which applies when the drawer is at rest and supports heavier stored contents.

The runner offers height adjustment of plus 2.5 mm, which lets small vertical changes be made at the hardware, and that helps bring drawer fronts into line when cabinet openings vary slightly.

Side adjustment of plus or minus 1.5 mm is built into this Progressa+ slide, which allows minor lateral shifts and helps keep reveals consistent where multiple drawer fronts align across a bank.

Depth adjustment of plus or minus 3 mm is also available at the hardware, which permits the drawer position to be fine-tuned front to back so faces can sit properly relative to the cabinet face or door plane.

Using Salice Progressa+ Slides In Cabinet Projects

Where These 24" Undermount Slides Are Applied

These Salice Progressa+ 24" soft-close full extension undermount slides sit beneath the drawer box, which keeps the hardware concealed and leaves the sides clear for clean lines or applied side details in cabinetry.

The 24 inch length matches deeper base or tall cabinet drawers, so the full extension stroke carries storage out to the front edge and supports access to contents typically lost at the rear of deeper boxes.

Because the runner is specified for 19 mm, or 3/4 inch, drawer material thickness, it aligns well with many shop-built drawer programs that standardize on that thickness for sides, helping streamline jigging and milling.

The ANSI BHMA A156.9-2020 Grade 1 performance, stated as met and exceeded, indicates the slides are tested to that drawer slide standard, which fits projects where architects or builders call out that grade on schedules.

The zinc finish on these undermount runners covers the working components, which aids in smooth interaction among parts as the synchronized rack and pinion mechanism moves under load in everyday cabinet use.

Why Load Rating And Adjustment Matter In Use

The 154 pound dynamic load capacity on this Salice Progressa+ system means the slides support substantial moving loads in use, so deeper drawers can hold heavier contents while still traveling the full extension distance.

The 170 pound static capacity provides additional support when drawers are stationary, which helps when drawers are left open with contents or when occupants lean against extended storage in work areas.

Height adjustment of plus 2.5 mm at the slide lets installers fine-tune vertical drawer front position relative to the cabinet opening, which is useful where floor or cabinet tolerances stack up over multiple units.

The side adjustment range of plus or minus 1.5 mm allows incremental shifting at the hardware, which supports tight, even gaps between neighboring fronts in multi-drawer stacks or wide banks.

Depth adjustment of plus or minus 3 mm lets the front be moved closer to or farther from the cabinet face, which assists in achieving flush alignment with adjacent doors or end panels across a run.

The synchronized mechanism and true progressive action help both slides move together throughout the stroke, which reduces racking forces on the drawer box and supports long-term alignment of joints and faces.

Common Questions About Salice Progressa+ 24" Slides

Selecting This 24" Runner For Drawer Projects

The Salice Progressa+ 24" soft-close full extension undermount slides combine a synchronized mechanism, 19 mm drawer material suitability, and ANSI BHMA A156.9-2020 Grade 1 performance for cabinet projects needing specific standards.

With 154 pound dynamic and 170 pound static load capacities plus height, side, and depth adjustment ranges, this Salice America runner offers the alignment and support needed for deeper 24 inch drawers in demanding installations.