Salice Progressa 15" Soft-Close Full Extension 120 lb Undermount Drawer Slide, Zinc, G5U9S381XXF6

Bright Zinc Undermount Slide For Face-Frame Cabinets With Thick Drawer Sides

The Salice Progressa is a 15 inch, full-extension, soft-close undermount drawer slide built for face-frame cabinets and drawer boxes with sides up to 3/4 inch (19mm) thick. Rated 120 lb per pair, it brings heavier-duty concealed-slide performance to traditional American cabinetry.

Key Features

• Face-frame cabinet compatibility makes this the right concealed slide for traditional American cabinet construction, not just frameless boxes.
• 3/4 inch (19mm) maximum drawer side thickness accommodates solid hardwood and thick plywood drawer boxes that thinner-version slides cannot fit.
• Full extension brings the entire drawer out to the cabinet face, giving complete access to contents at the back.
• 120 lb capacity per pair handles heavily loaded drawers well above the standard undermount range.
• Integrated soft-close catches the drawer near the end of travel and settles it shut silently without slamming.
• Steel construction with a bright zinc finish delivers lasting indoor durability in a concealed position beneath the drawer box.

Built for Face-Frame Work and Thick-Walled Drawer Boxes

Face-frame cabinets are common in traditional and transitional kitchens, bath vanities, and built-ins throughout North America. Most undermount slides are engineered around frameless construction, so a face-frame-specific slide saves the added engineering of sourcing rear brackets and confirming compatibility. The Progressa is designed for this construction from the start, paired with its matching rear mounting brackets to support the slide's back end behind the frame — confirm those brackets are in your order before installing.

The 3/4 inch side-thickness rating is equally specific. Shops building drawer boxes from solid hardwood or 3/4 inch plywood need the version of the slide whose spacing, locking devices, and box-width formula are dialed in for that material. This is that version. The box must still be built to Salice's published specification for the Progressa series — nominal 15 inch length, correct box width, bottom recess, and the drilling required by the front locking devices.

Steel and Zinc for Long-Term Indoor Performance

Steel members carry the 120 lb rated load through years of cycling, and the bright zinc finish resists corrosion in normal indoor environments. Because the slide runs concealed beneath the drawer box, the zinc finish does its job without affecting the look of the interior. The integrated soft-close mechanism is part of the slide assembly itself — no separate add-on damper to source or install — and it keeps the drawer closing quietly through the full service life of the cabinet.

Who Should Specify the Progressa in This Configuration

Cabinet shops and installers working on face-frame cabinetry with hardwood or thick-ply drawer boxes will find this the direct fit: the cabinet construction, the drawer side thickness, and the 120 lb capacity all align without compromise. It also suits renovation work where existing face-frame boxes are being re-slid and the drawer sides are already milled to 3/4 inch. At 15 inches, the nominal length works in shallower base cabinets and smaller vanity drawers where a longer slide would overrun the available depth.

FAQ

Concealed Performance Sized for the Job at Hand

When the cabinet is face-frame, the drawer sides are thick, and the load is real, the Progressa in this configuration removes the compromises and delivers a clean, quiet close every time.