Salice Progressa+ Drawer Slides For Heavy Drawers

Salice Progressa+ drawer slides are full extension undermount drawer runners designed for 30 inch drawers where access to the full drawer length matters for storage and workflow. The synchronized mechanism supports smooth travel so drawers open evenly, which helps prevent racking when users load or unload. Soft-close action controls closing speed, reducing slamming that can stress drawer boxes over time. These runners are engineered for 19 mm, or 3/4 inch, drawer material thickness, so shop layouts using standard 3/4 inch stock can be planned without extra rework. True progressive action with rack and pinion operation manages movement along the full slide length, which supports consistent resistance from closed to fully open. A zinc finish provides a uniform surface over the runner, which is useful for projects where hardware quality and appearance are part of the selling point. The runners are 100 percent made in Italy by Salice America.

Key Drawer Runner Details That Drive Performance

• The full extension design allows drawers to open to the end of the 30 inch runner, giving direct access to stored items and reducing reach-in, which supports more efficient use in deep cabinet applications.
• The synchronized mechanism coordinates both sides of the undermount drawer slides, helping the drawer track straight under off-center loads, which reduces binding during daily use.
• Soft-close action on the runner slows the last part of travel, so drawers close gently against the cabinet, which can reduce impact wear on fronts and reduce noise in finished installations.
• The slides are engineered for 19 mm, or 3/4 inch, drawer material, which aligns with common shop construction standards and supports repeatable layout for side clearances and drawer box builds.
• True progressive action with a rack and pinion system guides motion along the full stroke, helping maintain smooth movement under varying loads and making drawers feel consistent across multiple cabinets.
• The zinc construction on these slides provides a uniform metallic finish, which presents well on exposed hardware and reflects the Salice America manufacturing standard from their Italian production.

Adjustment-Focused Undermount Slide Setup Details

The Progressa+ undermount drawer runner provides height adjustment of plus 2.5 mm, which lets installers refine vertical alignment of drawer fronts relative to cabinet openings. Side adjustment of plus or minus 1.5 mm gives lateral tuning at the runner, useful for evening out reveals between adjacent drawers. Depth adjustment of plus or minus 3 mm allows the drawer front to be brought flush to the cabinet face or aligned with neighboring fronts. These integrated adjustments on the runner help reduce time spent modifying drawer boxes in the shop, because final alignment can be dialed in at install. By using the provided ranges together, an installer can fine-tune front position in three directions to meet project expectations.

Using These 30 Inch Undermount Slides In Projects

Where This Salice Progressa+ Slide Performs Best

These 30 inch soft-close full extension undermount drawer slides are suited to deeper base cabinets where full access is needed over the entire slide length. With a dynamic load capacity of 154 pounds, the runners support drawers that carry heavier contents during motion, which is important for storage where drawers are opened and closed frequently. The 170 pound static load capacity allows the drawer to hold higher weights at rest, supporting applications where contents are stored for long periods. The product sits in the undermount drawer slides class, so the hardware is concealed under the drawer, which can help achieve a clean interior look in cabinetry. Because the runners meet and exceed ANSI BHMA A156.9-2020 Grade 1 Standard, they are designed for high performance use in demanding environments where hardware is cycled repeatedly.

How Slide Adjustments Support Repeatable Drawer Alignment

The height adjustment range of plus 2.5 mm lets shop crews build consistent drawer boxes and rely on the runner for final vertical tuning, which simplifies replication across a full kitchen or commercial run. Side adjustment of plus or minus 1.5 mm at the slide offers lateral flexibility when cabinet openings vary slightly, helping keep vertical reveals visually consistent without rebuilding a drawer. Depth adjustment of plus or minus 3 mm provides front-to-face alignment control, valuable when matching neighboring fronts across wide banks of drawers. The true progressive action and synchronized rack and pinion mechanism support this alignment work by moving the drawer evenly, so small adjustments remain stable through the full open and close cycle. Because the runners are 100 percent made in Italy by Salice America, builders working across multiple jobs can reference the same manufacturer part number G7U9S762CXF2 to reproduce installation results.

Common Questions About Salice Progressa+ Drawer Slides

Selecting These Slides For High-Load Drawer Projects

The Salice Progressa+ drawer slides combine 30 inch full extension travel with soft-close operation, which supports both access and controlled closing for base cabinets and storage drawers. Their 154 pound dynamic and 170 pound static load ratings align with drawers carrying substantial contents. Adjustment ranges in height, side, and depth give installers control over final front alignment, while the synchronized progressive action delivers smooth, even movement. For projects that call for an undermount drawer runner meeting ANSI BHMA A156.9-2020 Grade 1, this Salice America G7U9S762CXF2 model offers a defined specification to build around.