Kitchen Kompact Warmwood wall cabinet is a 9 inch wide, 42 inch high, 12 inch deep cabinet that creates a narrow upper storage option in a matching Warmwood finish run. The cabinet uses a recessed panel wall design that ties in with other Kitchen Kompact Warmwood pieces for a consistent look across the kitchen line. Door frames use mortised and tenoned construction of solid 3/4 inch maple, which locks the joints together for stable, square doors during everyday use. Flat panel plywood inserts are three-ply panels with a rotary cut hard maple veneer face, so the visible interior panel presents a hard maple appearance that matches the frame. The unit uses maple flat panel doors, aligning the maple material across the door components for a uniform appearance. This cabinet is part of the Kitchen Kompact product class and uses manufacturer part number WW9WXT for job planning and ordering.
This Kitchen Kompact wall cabinet measures 9 inches wide by 42 inches high by 12 inches deep, so installers can plan upper layouts and filler use based on these dimensions. Solid wood hanging strips located on the top and bottom give clear fastening zones that run across the cabinet, which supports firm attachment into wall structure along both the upper and lower edges. Solid wood corner blocks are glued and power nailed, tying the cabinet sides together at the corners so the box holds square while it is clamped and fastened on the wall. The cabinet uses concealed, self-closing hinges on the maple flat panel doors, which means hinge arms stay inside the cabinet during mounting while the door closes fully against the frame after alignment.
The cabinet is a Kitchen Kompact Warmwood 9 inch wide by 42 inch high by 12 inch deep wall unit, so it fits narrow wall spaces in upper cabinet runs where a full-width cabinet will not fit but storage is still needed. Maple flat panel doors present a Warmwood maple face across the opening, carrying the same material as the 3/4 inch solid maple door frame for a consistent, single-species look. Flat panel plywood inserts use a three-ply panel with a rotary cut hard maple veneer face, so when doors are opened the inner panel visually matches the maple frame and Warmwood finish for a unified appearance. The cabinet sits within the Kitchen Kompact product class and uses SAP description WARMWOOD 9WXT and manufacturer part number WW9WXT, which supports job quoting, layout drawings, and reordering by part number for matching future work. This identity keeps the 9 inch Warmwood wall cabinet clearly tied to other Warmwood components in the same line.
Door frames are mortised and tenoned construction of solid 3/4 inch maple, so each corner uses interlocking joinery instead of simple butt joints, helping the door stay square and reducing the chance of twist that would affect reveals. Solid wood corner blocks are glued and power nailed, tying cabinet sides to the top and bottom panels at the corners so the box resists spreading forces when it is lifted, positioned, and fastened to wall studs. Solid wood hanging strips located on the top and bottom concentrate load transfer into solid lumber, which helps the wall cabinet stay tight to the wall once fasteners are driven. A four step process of stain, sealer, sanding and catalyzed top coat is applied, so the Warmwood finish is fully built as part of manufacturing rather than field finishing, allowing the cabinet to go from delivery to install without added finishing steps. Concealed, self-closing hinges manage the maple flat panel doors by hiding hinge hardware when closed and drawing the doors to the frame, which helps maintain even gaps and clean sightlines across an entire Warmwood wall run.
The Kitchen Kompact Warmwood wall cabinet measures 9 inches wide, 42 inches high, and 12 inches deep, which helps plan upper runs and narrow storage positions.
The door frames are solid 3/4 inch maple with mortised and tenoned construction, which supports strong, square doors that hold alignment on the wall cabinet.
The flat panel insert is a three-ply plywood panel with a rotary cut hard maple veneer face, providing a hard maple visual surface inside the maple door frame.
The cabinet uses concealed, self-closing hinges, so the hardware is hidden when the doors are shut and the doors pull themselves closed near the frame.
The cabinet uses a four step process of stain, sealer, sanding and catalyzed top coat, giving the Warmwood surface a complete factory-applied finish.
The cabinet has solid wood hanging strips located on the top and bottom, providing defined zones for fastening the wall cabinet to structure.
The Kitchen Kompact Warmwood 9 inch by 42 inch by 12 inch wall cabinet with maple flat panel doors, solid 3/4 inch maple mortised and tenoned door frames, solid wood hanging strips, and concealed self-closing hinges delivers a defined, repeatable construction spec for narrow upper runs. Using SAP description WARMWOOD 9WXT and manufacturer part number WW9WXT, this wall cabinet ties directly into Kitchen Kompact layouts where a Warmwood recessed panel wall unit is needed.
Sold In: 1 Each