Kitchen Kompact Warmwood wall cabinet anchors an upper run with a 18 inch wide, 42 inch high, 12 inch deep layout, so it provides tall wall storage without projecting beyond standard wall cabinet depth. The recessed panel design matches the Warmwood flat panel style, which keeps sightlines consistent when lining up multiple wall units. The manufacturer part WW18WXT identifies this exact size and style, helping coordinate with other Kitchen Kompact pieces in the same series. The cabinet sides are scaled to the 42 inch height, which gives extra vertical room for tall items while holding the same 18 inch footprint, useful when stacking storage above base cabinets. This sizing also supports layouts where the top of wall cabinets aligns at a consistent height around the room, keeping installation planning straightforward across several units.
Solid wood hanging strips located on the top and bottom give this cabinet defined mounting zones along the back edge, so the installer can place fasteners through solid material for a secure wall connection. Because the cabinet is 18 inches wide, the hanging strips help bridge across typical stud layouts for easier positioning on the wall. Concealed, self-closing hinges are built into the maple flat panel doors, so the doors swing on hidden hardware and pull themselves closed at the end of travel, which improves day-to-day operation in a finished kitchen. The mortised and tenoned solid 3/4 inch maple door frames hold the hinges on a solid edge, supporting repeated door cycles while keeping the recessed panel seated correctly within the frame.
The Kitchen Kompact 18 inch wide by 42 inch high by 12 inch deep Warmwood wall cabinet is sized for upper cabinet runs where extra height is needed while holding a standard wall depth. The recessed panel Warmwood doors tie in with other Kitchen Kompact Warmwood pieces, so this unit can sit beside matching wall cabinets in the same line for a continuous look. The 42 inch height allows this cabinet to be used in taller ceiling applications or stacked arrangements, giving designers another vertical option inside the Warmwood series. Solid wood hanging strips at the top and bottom make this cabinet suitable for typical wall framing layouts, because both strips present solid fixing points anywhere along the cabinet width. Adjustable shelves inside the cabinet let installers or end users set shelf positions to match stored items, so the 42 inch height is used efficiently rather than forcing fixed spacing.
Door frames built from solid 3/4 inch maple with mortised and tenoned construction give this cabinet predictable door alignment, which reduces the need for rework after installation because the frame resists twisting. Solid wood corner blocks that are glued and power nailed hold the case square during handling and hanging, so installers can register the cabinet against adjacent units with tight joints. The flat panel plywood insert with a three-ply build and rotary cut hard maple veneer face provides a stable center panel that moves consistently with normal room conditions, which supports long-term fit between the panel and frame. A 4 step process of stain, sealer, sanding and catalyzed top coat yields a controlled Warmwood finish, helping multiple WW18WXT cabinets read the same color and sheen when installed in a row. Concealed, self-closing hinges on the maple flat panel doors allow clean front views and consistent closing action, which simplifies aligning door reveals across several cabinets in a project. Solid wood hanging strips at both the top and bottom edges keep fastener bite consistent along the back, supporting repeatable mounting practices from one cabinet to the next on site.
The Kitchen Kompact Warmwood wall cabinet measures 18 inches wide, 42 inches high, and 12 inches deep, so it fits tall wall layouts while matching standard upper cabinet depth.
The door frames are solid 3/4 inch maple with mortised and tenoned construction, giving the doors a rigid frame that supports long-term hinge attachment and daily operation.
The center is a flat panel plywood insert made as a three-ply panel with a rotary cut hard maple veneer face, providing a stable recessed panel with a maple appearance.
The cabinet uses solid wood hanging strips located on the top and bottom, giving continuous solid mounting areas along the back for fastening to wall framing.
The Warmwood flat panel doors use concealed, self-closing hinges, so the hardware is hidden when the doors are shut and the doors pull themselves closed during use.
The cabinet receives a 4 step process of stain, sealer, sanding and a catalyzed top coat, producing a protective Warmwood finish suitable for kitchen cabinet environments.
The Kitchen Kompact Warmwood 18 inch wide by 42 inch high by 12 inch deep wall cabinet WW18WXT combines a recessed panel Warmwood style with solid 3/4 inch maple door frames and a three-ply maple veneer panel, giving a coordinated look and stable doors in service. Solid wood hanging strips on the top and bottom and glued, power nailed corner blocks support straightforward wall mounting and a square case when tying into adjoining cabinets. Use this size when a tall Warmwood wall cabinet is needed that still lines up with standard upper cabinet depths along the run.
Sold In: 1 Each