Kitchen Kompact Warmwood wall cabinet is a 27 inch wide, 42 inch high, 12 inch deep wall cabinet that provides upper storage in a standard kitchen run. The cabinet uses door frames with mortised and tenoned construction of solid 3/4 inch maple, creating a rigid frame that helps doors stay aligned through daily use. Solid wood corner blocks are glued and power nailed, tying the cabinet box together so it resists racking when fastened on the wall. A flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, giving a consistent Warmwood appearance across the recessed panel doors. Solid wood hanging strips located on the top and bottom give a solid fastening surface along the back, which supports stable mounting to wall framing. Maple flat panel doors finish the cabinet with a recessed panel style that matches other Kitchen Kompact Warmwood pieces.
This Kitchen Kompact wall cabinet uses solid wood hanging strips located on the top and bottom, which gives installers defined fastening zones for securing the cabinet to studs. The 27 inch width and 42 inch height form a common upper cabinet size, lining up with adjacent units in many kitchen layouts. Solid wood corner blocks, glued and power nailed, keep the case square while it is lifted into place and tied into a run. Mortised and tenoned solid 3/4 inch maple door frames keep the doors stable during alignment, so hinge adjustment can focus on reveal rather than fighting door twist. The 12 inch depth gives a standard reach over base cabinets, supporting comfortable access to stored items.
The Warmwood WW27WXT wall cabinet is a 27 inch wide, 42 inch high, 12 inch deep unit used as an upper cabinet in Kitchen Kompact Warmwood layouts. The solid wood hanging strips located on the top and bottom let this cabinet anchor into wall framing, making it suitable as part of a straight run or at a transition between cabinets of different widths. Maple flat panel doors with a recessed panel profile visually match other Kitchen Kompact Warmwood wall and base units, supporting a consistent door style across the kitchen. The three-ply flat panel plywood insert with rotary cut hard maple veneer face carries the Warmwood look into the center panel, so doors tie in with nearby fronts. Adjustable shelves allow the 42 inch height to be used efficiently, whether storing taller serving pieces or everyday pantry items.
The mortised and tenoned construction of solid 3/4 inch maple door frames gives a tight corner joint, which helps doors stay true while hinges are adjusted for even gaps across a run. Solid wood corner blocks, glued and power nailed, hold the cabinet square so installers can gang multiple WW27WXT units without fighting case twist. Solid wood hanging strips located on the top and bottom offer predictable fastening locations, streamlining layout when aligning screws along a level line into studs. The flat panel plywood insert, built as a three-ply panel with a rotary cut hard maple veneer face, reduces panel movement compared with solid lumber, supporting a stable recessed panel appearance over time. Concealed, self-closing hinges simplify door alignment inside the case while also pulling doors shut, helping maintain a clean front line without external hinge hardware. The 4 step process of stain, sealer, sanding and catalyzed top coat creates a layered Warmwood finish that holds its color and sheen as doors and shelves are used in everyday kitchen work.
The WW27WXT cabinet is 27 inches wide, 42 inches high, and 12 inches deep, so it fits standard upper cabinet runs where that footprint is planned.
The cabinet has maple flat panel doors with door frames using mortised and tenoned construction of solid 3/4 inch maple, giving a stable recessed panel door assembly.
The cabinet uses solid wood corner blocks that are glued and power nailed, plus solid wood hanging strips at the top and bottom, helping the case stay square and secure on the wall.
The door center uses a flat panel plywood insert that is a three-ply panel with a rotary cut hard maple veneer face, providing a stable core with a maple appearance.
The cabinet receives a 4 step process of stain, sealer, sanding and catalyzed top coat, building a Warmwood finish suited to regular handling in a kitchen.
The cabinet has adjustable shelves and concealed, self-closing hinges, so shelf positions can vary while doors close themselves without exposed hinge hardware.
The Kitchen Kompact Warmwood wall cabinet WW27WXT combines a 27 inch width, 42 inch height and 12 inch depth with mortised and tenoned solid 3/4 inch maple door frames, solid wood corner blocks, and solid wood hanging strips that support dependable wall installation. The flat panel plywood insert with rotary cut hard maple veneer face and maple flat panel doors keep the Warmwood recessed panel style consistent across a kitchen. Adjustable shelves, concealed self-closing hinges, and the 4 step Warmwood finish process turn the cabinet into a practical upper storage unit. Use these verified details to match this wall cabinet to the rest of a Kitchen Kompact Warmwood layout and to plan mounting and layout around its dimensions and construction.
Sold In: 1 Each