Kitchen Kompact wall cabinet in the Warmwood line provides a 33 inch wide, 42 inch high, 12 inch deep wall unit that adds storage in a predictable footprint, which matters when laying out upper runs on a measured kitchen wall. The cabinet uses maple flat panel doors, so the visible fronts present a consistent maple appearance that coordinates with other maple components on the job. Door frames are mortised and tenoned construction of solid 3/4 inch maple, creating a jointed frame that supports the flat panel insert and helps the doors hold alignment during everyday use. Maple flat panel doors surround a flat panel plywood insert that is a three-ply panel with a rotary cut hard maple veneer face, so the door interior field also carries a maple look that matches the frame. The cabinet is identified as model WW33WXT and WARMWOOD 33WXT, which ties directly to Kitchen Kompact ordering and replacement documentation.
The 33 inch wide, 42 inch high, 12 inch deep size defines the cabinet envelope, so installers can plan stud engagement and clearances when laying out upper cabinets. Solid wood hanging strips located on the top and bottom run the full width of the cabinet, giving a reliable wood surface for anchoring the cabinet to the wall structure. Solid wood corner blocks are glued and power nailed at the corners, helping the cabinet box stay square when lifted, clamped, and fastened during an install sequence. Door frames are mortised and tenoned construction of solid 3/4 inch maple, so hinge mounting areas on the doors are solid wood, ready for hinge attachment and adjustment. The cabinet uses concealed, self-closing hinges, which position the doors consistently as they close, supporting even reveals along cabinet runs.
The Kitchen Kompact 33 inch wide x 42 inch high x 12 inch deep Warmwood wall cabinet is intended for wall mounting in kitchen runs where that footprint matches the layout. The Warmwood designation and WARMWOOD 33WXT description identify the cabinet as part of the Warmwood line, so it coordinates with other Warmwood units in the same project. Maple flat panel doors with a flat panel plywood insert with a rotary cut hard maple veneer face present a consistent maple appearance across the cabinet face, which is useful when the cabinet sits next to other maple-front units. Solid wood hanging strips located on the top and bottom give defined mounting zones at both the upper and lower back edges, supporting typical wall cabinet installation patterns along a straight run.
Mortised and tenoned construction of solid 3/4 inch maple in the door frames provides a precise frame structure, which helps the maple flat panel doors stay aligned with neighboring doors along the wall when hinges are adjusted. Concealed, self-closing hinges on the maple flat panel doors draw the doors closed at the end of the swing, which supports consistent gaps and a clean line of fronts across multiple Warmwood cabinets. Solid wood corner blocks that are glued and power nailed help the cabinet box resist racking, which supports accurate alignment at face frames when cabinets are ganged side by side. The flat panel plywood insert with its three-ply construction and rotary cut hard maple veneer face supplies a stable panel with a maple surface, keeping the central panel visually consistent while supporting routine opening and closing. Solid wood hanging strips at the top and bottom allow installers to engage fasteners along straight wooden members, which promotes repeatable results when setting several WW33WXT units in a row. The 33 inch width and 42 inch height provide a standard module that can be repeated along the wall, simplifying layout using known cabinet dimensions.
The Kitchen Kompact 33WXT wall cabinet measures 33 inches wide, 42 inches high, and 12 inches deep, giving installers a defined footprint for planning upper cabinet runs.
The WW33WXT door frames use mortised and tenoned construction of solid 3/4 inch maple, providing solid wood at the frame for hinge mounting and door alignment.
The door uses a flat panel plywood insert that is a three-ply panel with a rotary cut hard maple veneer face, giving the center panel a maple appearance over a stable core.
The Kitchen Kompact wall cabinet uses concealed, self-closing hinges, so the hinge hardware is hidden from the front and the doors pull themselves closed at the end of travel.
Solid wood hanging strips located on the top and bottom provide continuous wood members for anchoring the cabinet to the wall, supporting secure mounting along the cabinet width.
The Warmwood cabinet uses a 4 step process of stain, sealer, sanding, and catalyzed top coat, producing a finished surface suited to everyday kitchen cabinet use.
The Warmwood 33 inch wide x 42 inch high x 12 inch deep Kitchen Kompact wall cabinet offers maple flat panel doors, a three-ply rotary cut hard maple veneer panel, and concealed, self-closing hinges in a defined module. Solid wood hanging strips at the top and bottom, mortised and tenoned solid 3/4 inch maple door frames, and solid wood corner blocks that are glued and power nailed provide a construction package suited to building straight, aligned wall runs. For projects based around the Warmwood line, the WW33WXT model and WARMWOOD 33WXT description align this cabinet with matching units for consistent fronts and sizing.
Sold In: 1 Each