Kitchen Kompact Warmwood wall cabinet is a 30 inch wide, 42 inch high, 12 inch deep wall unit designed for upper cabinet runs where consistent size matters for layout. The cabinet uses door frames built from solid 3/4 inch maple, which keeps the door structure substantial for repeated use in busy kitchens. Door frames are mortised and tenoned, creating interlocking joints that help the doors stay square over time. Solid wood corner blocks are glued and power nailed, tying the cabinet box corners together so the case stays rigid when loaded. A flat panel plywood insert with a three-ply construction and rotary cut hard maple veneer face provides a stable center panel that accepts the Warmwood finish cleanly. Solid wood hanging strips located on the top and bottom give solid material for fastening the cabinet to wall framing during installation.
This Kitchen Kompact 30 inch wide by 42 inch high by 12 inch deep wall cabinet fits standard upper cabinet dimensions, which simplifies planning with other Kitchen Kompact units. The maple flat panel doors use the mortised and tenoned 3/4 inch solid maple frames, tying into the flat panel plywood insert for a recessed panel look suited to the Warmwood style. The rotary cut hard maple veneer face on the insert aligns the visible grain with the maple frames, supporting a consistent appearance across doors in the same run. With the Warmwood finish handled through the four step stain, sealer, sanding, and catalyzed top coat system, the cabinet exterior is prepared for typical kitchen humidity and frequent contact.
The Kitchen Kompact WW30WXT cabinet, identified in the SAP description as WARMWOOD 30WXT, is sized for use as a 30 inch upper in standard kitchen layouts. Its 42 inch height suits taller wall applications where added vertical storage is needed above countertops. At 12 inches deep, the cabinet aligns with common wall cabinet depths so it can sit in line with other Kitchen Kompact units in the same category. The maple flat panel doors with recessed panel design coordinate with other Kitchen Kompact Warmwood pieces, helping maintain a uniform door style. Solid wood hanging strips at the top and bottom of the cabinet give installers clear fastening zones along the wall, which supports a straightforward mounting process across multiple studs or blocking. The use of solid wood corner blocks glued and power nailed also helps the case handle the loads typical in kitchen upper cabinets without twisting along a row.
The solid 3/4 inch maple door frames with mortised and tenoned construction give each door a stable perimeter, which helps keep reveals uniform between doors along a run. The three-ply flat panel plywood insert uses a rotary cut hard maple veneer face, pairing the face appearance with the maple frames so the Warmwood finish reads consistently across the entire door. Concealed, self-closing hinges keep the hinge mechanism out of sight when the door is closed, supporting a clean front across adjacent cabinets while drawing doors fully shut at closing. The four step process of stain, sealer, sanding, and catalyzed top coat builds a layered finish system on the maple and veneer surfaces, which prepares the cabinet exterior for repeated handling in a working kitchen. Solid wood hanging strips on both the top and bottom edges keep the fastening zone in solid material, aiding straight alignment with neighboring wall cabinets during installation.
The Kitchen Kompact Warmwood wall cabinet measures 30 inches wide, 42 inches high, and 12 inches deep, which suits typical upper cabinet runs in many kitchen layouts.
The door frames are constructed from solid 3/4 inch maple with mortised and tenoned joints, giving the doors a sturdy frame that supports long-term alignment and operation.
The recessed panel uses a three-ply flat panel plywood insert with a rotary cut hard maple veneer face, providing a stable panel that matches the maple frame appearance.
The Kitchen Kompact Warmwood wall cabinet uses concealed, self-closing hinges, keeping hardware hidden while drawing the doors closed at the end of travel.
The cabinet receives a four step process of stain, sealer, sanding, and a catalyzed top coat, creating a multi-layer finish on the maple and veneer surfaces.
The cabinet box uses solid wood corner blocks that are glued and power nailed, helping the case remain rigid under normal wall cabinet storage loads.
The Kitchen Kompact Warmwood wall cabinet WW30WXT brings a 30 inch wide, 42 inch high, 12 inch deep format that aligns with standard upper cabinet planning while delivering the Warmwood recessed panel look. Solid 3/4 inch maple door frames, three-ply plywood inserts with hard maple veneer faces, and glued, power-nailed corner blocks support long-term use in active kitchens. Solid wood hanging strips at the top and bottom, along with concealed, self-closing hinges on the maple flat panel doors, help create straight, clean wall runs. For projects built around Kitchen Kompact Warmwood styling, this wall cabinet format lets you extend that look through the upper section of the kitchen.
Sold In: 1 Each