Snip LED Panel 24V 12W 6500K Daylight Use

Snip LED Panel 24V 12W 6500K from Tresco Lighting is a paper-thin LED panel light that delivers daylight-colored illumination across a wide surface, so you can light work areas, displays, or cabinets with even coverage instead of point hotspots. The 24 inch x 9 inch panel format creates a broad sheet of light, which helps reduce shadowing along long runs or behind deeper face frames. The daylight 6500K color temperature produces a bright, neutral-toned light, supporting accurate visibility where color clarity and detailed work matter. Operating at 24V with 12W total power uses low-voltage wiring, which fits common LED power systems in many shop or cabinet installations. The dimmable design allows output to be tuned with a compatible control, so the same installation can serve task lighting at higher levels and softer accent lighting when reduced.

Key LED Panel Details For Custom Layouts

• Paper-thin illumination lets the Snip LED panel sit close to mounting surfaces, which helps when space is limited behind panels, shelves, or cabinet backs in tight millwork applications.
• LED sheets can be snipped into 3 inch x 3 inch (76 mm x 76 mm) squares, so installers can size the lighting precisely to a given recess, niche, or display area without redesigning the project.
• Squares can be re-connected into custom configurations, allowing the lighting to follow irregular shapes or longer runs and helping maintain continuous even illumination across complex layouts.
• The panel has the flexibility to conform to curved surfaces and wrap around objects, which supports creative lighting on radius cabinets, columns, or signage where rigid fixtures would break the line of light.
• Strong 300 LSE 3M adhesive backing provides peel-and-stick mounting, so the panel adheres directly to suitable substrates, reducing separate mounting steps and keeping the profile minimal.
• Output rated at 8W per square foot aligns the panel area with predictable power demand, which simplifies planning for drivers and circuits when multiple panels or cut sections are combined.

Installation And Mounting For Snip LED Panel

The Snip LED Panel 24V 12W 6500K uses strong 300 LSE 3M adhesive backing, so installers can press the panel directly onto clean, compatible surfaces, saving drilling and bracket layout time in finished cabinetry or displays. The paper-thin construction lets the panel sit flat behind diffusers or on substrates, which helps maintain tight clearances in shallow cavities while still delivering surface-wide light. No soldering is required because the system uses simple Flex br Connect connectors, so panel sections can be joined or oriented without open-solder work, supporting faster field configuration. The panel operates on 24V, fitting into low-voltage installation practices and allowing runs to be integrated into existing 24V lighting circuits where that standard is already used.

Using This Flexible LED Sheet In Projects

Where The Snip LED Panel Works Best

The Snip LED Panel 24V 12W 6500K is designed as a flexible LED sheet that can conform to curved surfaces, so it suits applications like radius cabinetry, columns, and wrap-around displays where straight bars cannot follow the contour. The 24 inch x 9 inch base size gives a large starting panel, which is useful for broad cabinet tops, wall panels, or under-shelf zones that need uninterrupted light. Because the LED sheets can be snipped into 3 inch x 3 inch squares and re-connected, the same product adapts to narrow valances, irregular recesses, or segmented shelving, reducing the need to source multiple fixture types. Daylight 6500K output provides bright illumination across these areas, which can support detailed visual tasks and highlight materials consistently along an entire run.

Details That Support Clean, Repeatable Results

The ability to snip the LED panel into 3 inch x 3 inch squares means cuts follow a defined grid, helping installers keep section sizing repeatable from one cabinet or bay to the next. Re-connectable sections allow the pattern of light to stay continuous around obstacles, so gaps in illumination are reduced when working around supports or cutouts. Strong 300 LSE 3M adhesive backing holds the panel flush to the surface, which keeps the profile even for overlays or diffusers and helps maintain a consistent distance between LEDs and any front panel. The paper-thin design reduces build-up behind finished surfaces, which supports tight-fitting millwork where every millimeter of depth matters. Dimmable performance lets the same installation be tuned to different environments, so lighting levels can align with other room sources without changing the physical layout. With output defined at 8W per square foot, electrical planning stays predictable across repeated casework runs and similar project types.

Common Questions About Snip LED Panel 24V 12W

Selecting This LED Panel For Your Project

The Snip LED Panel 24V 12W 6500K from Tresco Lighting delivers paper-thin, daylight 6500K illumination that can be cut, re-connected, and curved to match demanding layouts. Use its 24 inch x 9 inch format, 3 inch x 3 inch snip grid, dimmable performance, and 24V operation to plan uniform lighting across cabinets, displays, or architectural elements where even coverage and low-profile installation are priorities.