Snip LED Panel 24V 22.5W 3000K Warm White

Snip LED Panel 24V 22.5W 3000K is a Tresco Lighting paper-thin LED panel that provides warm white illumination for projects that need low-profile lighting. The paper-thin construction delivers light without a bulky fixture body, which helps when space behind panels, displays, or trim is tight. The panel is designed as an LED sheet, so it spreads light across its surface for continuous even illumination over the full 24 inch by 9 inch area. The 3000K warm white color temperature provides a warm visual tone that suits residential and commercial millwork where comfortable lighting is preferred. The panel runs on 24V power at 22.5W, so load planning and driver selection can be based on a clear, fixed wattage. Sold per each, this panel is suited to single-feature installations or scaled multi-panel layouts. UL Listing supports use in projects where recognized safety compliance matters.

Key LED Panel Details For Custom Lighting Work

• Paper-thin illumination allows this LED panel to sit close to surfaces, which helps when recess depth is limited or when a visible fixture profile would interfere with design lines.
• The Snip panel can conform to curved surfaces, so it delivers even light along arcs or rounded features where rigid fixtures would leave gaps or hot spots.
• LED sheets can be snipped into 3 inch by 3 inch squares, letting installers size panels to specific fields or cutouts while keeping light coverage aligned to the layout.
• Snipped sections can be re-connected into any custom configuration, which supports complex shapes or longer runs without relying on multiple unrelated fixtures.
• No soldering is required because simple Flex br Connect connectors handle the joins, reducing bench work and keeping field changes faster and more predictable.
• A strong 300 LSE 3M adhesive backing supports peel-and-stick mounting, so the panel bonds directly to appropriate substrates and stays flat during final trim-out.
• The panel output of 15W per square foot ties light density to area, helping with straightforward planning when multiple panels or cut sections are used.
• Dimmable performance lets the same installation serve accent or task roles, because light levels can be tuned to the environment or time of day.

Installation And Cut Layout Details For Snip Panel

This Tresco Lighting Snip LED panel uses a strong 300 LSE 3M adhesive backing to mount with a peel-and-stick method, so the lighting surface presses directly onto the chosen substrate without brackets. The ability to snip the panel into 3 inch by 3 inch sections allows installers to match panel edges with cabinet bays, display fields, or architectural details. Re-connecting sections into any custom configuration means curves, offsets, and mixed field sizes can be handled with the same product. Flex br Connect connectors handle connections between snipped pieces, so installation focuses on layout and adhesion rather than soldering work. The 24V, 22.5W load for the panel and 15W per square foot output provide predictable electrical demand when planning runs or grouping panels on a circuit.

Using This Flexible LED Panel In Real Projects

Where This Snip LED Panel Works Best

This Snip LED panel from Tresco Lighting, sized at 24 inches by 9 inches, functions as a flat lighting sheet for surfaces that benefit from continuous even illumination. The paper-thin illumination design lets it sit directly behind diffusers, signage, or translucent panels where distance between the light source and face material is minimal. Because the panel can conform to curved surfaces, it supports lighting on rounded columns, curved reception desks, or arched casework without breaking the light into separate rigid fixtures. The 3000K warm white output suits areas requiring comfortable visual warmth, such as residential cabinetry, hospitality millwork, or reception features. As part of the LED panel lights category, it provides surface-wide illumination rather than point sources, which simplifies achieving uniform light in shallow cavities or behind decorative panels.

Why The Cuttable, Dimmable Design Supports Clean Results

The ability to snip this LED sheet into 3 inch by 3 inch squares means layout can follow the project rather than forcing the project to fit a fixed fixture length, which reduces trimming or redesign of millwork just to suit lighting. Re-connecting snipped pieces into any custom configuration lets installers bridge around obstructions or openings while still presenting a continuous lit field. No-solder installation through Flex br Connect connectors keeps electrical work more repeatable across jobs, since cutting and reconnecting rely on the same connector approach instead of on varied solder joints. The strong 300 LSE 3M adhesive backing holds the panel flat against the mounting surface, which helps maintain even light and reduces the risk of sagging that could telegraph through thin diffusers. Dimmable capability lets one installation handle both full-output tasks and lower-level accent scenes, so lighting performance can be tuned without changing hardware. The 15W per square foot specification ties output to area in a clear way, supporting consistent brightness when combining full panels and snipped sections within the same visual field.

Common Questions About Snip LED Panel Use

Select This LED Panel For Flexible Warm White Projects

The Tresco Lighting Snip LED Panel 24V 22.5W 3000K offers paper-thin illumination, a 24 inch by 9 inch LED sheet format, and 3000K warm white output for continuous even illumination in surface-driven designs. Cuttable 3 inch by 3 inch sections, Flex br Connect connectors, and a strong 300 LSE 3M adhesive backing support straightforward layout changes and peel-and-stick mounting. With 15W per square foot and dimmable performance, this UL Listed LED panel from Wurth Baer Supply aligns with projects that need warm, low-profile lighting that follows the geometry of the work.