Snip LED Panel 24V 12W 5000K Lighting

Snip LED Panel 24V 12W 5000K delivers paper-thin illumination that lays flat wherever space is tight, so you can add functional lighting without building depth into cabinets, displays, or fixtures. The panel design provides continuous even illumination, helping reduce hot spots and shadows on work surfaces or display areas. Flexible construction allows the Snip panel to conform to curved surfaces and wrap around objects, which lets you follow architectural details and cabinet contours without breaking the light pattern. The LED sheet can be snipped into 3 inch by 3 inch squares and re-connected into custom configurations, so you can size the light field to match each project instead of working around fixed bar lengths. Operating at 24V and 12W with a 5000K cool color, the panel supports bright, neutral task lighting suitable for shops, kitchens, or display cases where clear visibility matters.

Key Snip LED Panel Details For Projects

• The paper-thin Snip panel design delivers illumination in low-profile spaces, which lets you add lighting behind panels or under shelves without changing your construction thickness.
• Flexibility that lets the panel conform to curved surfaces means you can follow radius cabinetry, columns, or signage while keeping light levels consistent across the run.
• Snippable 3 inch by 3 inch LED squares that can be re-connected allow tailored layouts, so you can fill irregular shapes or specific zones with light instead of leaving dark gaps.
• No-solder installation using simple Flex br Connect connectors keeps electrical connections straightforward, which streamlines layout changes and speeds repeat jobs.
• Strong 300 LSE 3M adhesive backing provides a peel-and-stick installation method, so you can bond the panel directly to clean surfaces without separate mounting brackets.
• An output of 8W per square foot and dimmable performance lets you tune light levels to the task, from bright task lighting to softer accent lighting in the same installation.

Installation, Layout, And Mounting Characteristics

The Snip LED Panel uses strong 300 LSE 3M adhesive backing, so installation is handled by pressing the sheet onto the mounting surface, helping maintain alignment on vertical or overhead applications. Snippable 3 inch by 3 inch squares mean you cut the panel along the defined grid, which simplifies fitting around cabinet hardware, vents, or structural elements. Flex br Connect connectors handle re-connection after cutting, so you can bridge around corners or gaps while keeping electrical continuity within your layout. Operation at 24V with 8W per square foot and a 12W panel rating supports planning of drivers and circuits by known wattage, which helps coordinate multiple panels on a single run. Dimmable capability allows the installed system to respond to different lighting needs in the same space, such as changing from working light levels to presentation levels without reworking the layout.

How This Snip LED Panel Works In Use

Flexible LED Sheet For Curved And Flat Surfaces

The Snip LED Panel is described as paper-thin illumination, which allows it to sit directly on cabinetry, casework, or architectural elements without adding bulk that would interfere with door clearances or trim details. Its ability to conform to curved surfaces means the same panel can follow arcs on bars, reception desks, or display pedestals, maintaining illumination where rigid fixtures would break the line. Because the LED sheet can wrap around objects, you can run light across faces and then continue around returns or columns, supporting continuous appearance across multiple planes. The strong 300 LSE 3M adhesive backing helps the panel stay bonded along curves and edges, which supports clean lines without visible clips or tracks. UL Listing provides a recognized safety listing, which supports use in commercial or residential millwork environments where listed components are required by project specifications.

Custom Snippable Layouts For Precise Illumination

The LED sheet can be snipped into 3 inch by 3 inch squares and re-connected into any custom configuration, which lets you size panels to follow cabinet bays, shelving sections, or signage fields without leaving unused length. Each 3 inch by 3 inch square becomes a building block that you can place to follow project geometry, improving uniformity across wider surfaces. Flex br Connect connectors provide a no-solder way to link cut sections, so repositioning or expanding a run remains accessible even when field adjustments are needed. The output of 8W per square foot gives a predictable wattage per area, helping you balance light levels and driver capacity when combining multiple squares or panels in one installation. Dimmable operation means once the custom layout is installed, light levels can be adjusted for different room conditions or display requirements while the physical arrangement stays fixed.

Common Questions About This Snip LED Panel

Select This Snip LED Panel For Custom Lighting

The Tresco Lighting Snip LED Panel, 24V 12W 5000K, pairs paper-thin construction with flexible, snippable LED squares, supporting precise layouts in tight millwork and display projects. Add this dimmable, peel-and-stick LED sheet to your next installation where continuous, even illumination and curved-surface coverage are required.