Classic Series base cabinet Brownstone Dartmouth is a 9 inch wide, 24 inch deep, 34-1/2 inch high base cabinet from The Wolf Organization, LLC that provides a narrow storage and support option in the Classic Series line. The cabinet has one full-height door, so the interior opens as a single tall compartment for vertical storage runs or for housing taller items below the countertop. Cabinet fronts are made from 3/4 inch solid maple wood, giving the working face a solid hardwood structure where doors are handled and bumped during daily kitchen or shop activity. Rails are pocket drilled and assembled with 1-1/4 inch screws, creating a mechanically fastened face frame that resists racking when the cabinet is moved, leveled, or tied into adjoining units. This model is part of the WOLF Home Products cabinet offering, so it aligns with other pieces in the Classic Series Base Cabinets Brownstone, Dartmouth lineup when building a continuous run.
The cabinet height of 34-1/2 inches is sized to work as a standard base unit height under typical countertops, supporting a common finished work surface line when combined with standard top thicknesses. A 4-1/2 inch high by 4-1/16 inch deep toekick is built into standard cabinets, providing recessed clearance at the bottom front so installers can stand close to the work surface while also giving space to run trim along the floor. The half-depth adjustable shelf is made from 3/4 inch plywood with bull-nosed, foil-covered front edges, so the shelf carries weight on a substantial core while the front edge has a finished profile suited to visible openings. The shelves are held in place with self-locking 1/4 inch diameter clips on the sides, allowing the shelf height to be changed within the interior while the clips hold firm in normal loading.
This Classic Series Base Cabinets Brownstone, Dartmouth 9 inch wide unit fits into narrow gaps in base runs, allowing designers and installers to fill small spaces with functional storage rather than filler pieces. The 24 inch depth matches standard base cabinet depth, so this cabinet aligns with adjoining Wolf Home Products base cabinets along the front plane and depth for a straight run. The 34-1/2 inch height keeps the top of the cabinet at a standard base level, supporting a continuous countertop when this 9 inch cabinet is combined with wider units. One full-height door means the entire interior opens through a single access point, so even in a narrow footprint the full height can be used for tall items or vertical dividers as part of the overall layout.
The cabinet fronts use 3/4 inch solid maple wood, giving hinge and door hardware mounting areas a strong hardwood base that holds fasteners securely through repeated use. Rails that are pocket drilled and assembled with 1-1/4 inch screws create tight joints in the face frame, so the frame stays stable when cabinets are clamped together during installation. Side panels and the bottom made from 1/2 inch plywood with matching exterior laminate, glued and stapled into a 1/2 inch dado, form a rigid box that helps keep reveals even when the cabinet is shimmed and leveled. Back panels of vinyl-covered 1/2 inch plywood, glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom, provide a durable interior surface while giving the installer a solid structural back for positioning against wall studs. All-wood 3/4 inch corner blocks at all corners help transfer countertop and load forces into the frame, which supports long-term alignment of doors and front edges in typical kitchen or shop environments. The half-depth adjustable 3/4 inch plywood shelf with bull-nosed, foil-covered front edge, supported by self-locking 1/4 inch diameter clips, allows interior configuration changes while maintaining a neat, finished front edge inside the cabinet opening. The 4-1/2 inch high by 4-1/16 inch deep toekick on standard cabinets sets a defined recess that simplifies aligning base trim and maintaining a consistent toe space across a run.
This Classic Series base cabinet is 9 inches wide, 24 inches deep, and 34-1/2 inches high, so it fits standard base cabinet depth and height while occupying a narrow 9 inch space in a run.
The cabinet fronts are made from 3/4 inch solid maple wood, providing a hardwood surface that supports hinge mounting and stands up to regular door use in kitchen or shop settings.
The side panels and bottom use 1/2 inch plywood glued and stapled in a 1/2 inch dado in the front frame, creating a rigid box that helps the cabinet remain square under load and during installation.
The back panels are vinyl-covered inside 1/2 inch plywood, glued and nailed in a 1/2 inch dado and stapled to the hang rail and bottom, providing a solid, cleanable interior back surface.
The half-depth adjustable shelf is 3/4 inch plywood with a bull-nosed, foil-covered front edge, and it is held by self-locking 1/4 inch diameter clips on the sides for stable, adjustable support.
The toekick on standard cabinets is 4-1/2 inches high by 4-1/16 inches deep, creating a recessed area for comfortable standing space and consistent toe clearance along a cabinet run.
This Classic Series base cabinet Brownstone Dartmouth 9 inch model combines a one full-height door layout with 3/4 inch solid maple fronts and a plywood box, giving a narrow station that still carries full cabinet construction. With 24 inch depth, 34-1/2 inch height, and a 4-1/2 inch by 4-1/16 inch toekick, it aligns with standard base runs while solving small-gap layout challenges. Use its vinyl-covered 1/2 inch plywood back, all-wood 3/4 inch corner blocks, and half-depth adjustable 3/4 inch plywood shelf on self-locking clips to build a continuous Wolf Home Products Brownstone, Dartmouth installation that stays structurally consistent from end to end.
Sold In: 1 Each