Classic Series Base Cabinets Brownstone, Dartmouth 30"W x 24"D x 34-1/2"H - Wolf 3036379 is a base cabinet built around a 30 inch width, 24 inch depth, and 34-1/2 inch height, so it fits standard base runs in many kitchen layouts. Two butt doors and one drawer divide access between quick-reach drawer storage and larger cabinet space, supporting a typical sink or work-area configuration. One adjustable half-depth shelf in the cabinet interior lets you change storage height while leaving room toward the back for plumbing or deeper items. Cabinet fronts made from 3/4 inch solid maple wood provide a hardwood working face, giving screw-holding strength at the frame where doors and drawer hardware mount. The Brownstone finish on the Dartmouth style fronts establishes a consistent front appearance when used with other Wolf Home Products in the same series.
This Dartmouth 30 inch base cabinet uses a 1/2 inch plywood box for the sides, bottom, and back, so the installer works with familiar plywood nailing and screwing behavior when tying units together. The side panels and bottom, glued and stapled in a 1/2 inch dado at the front frame, keep the opening square, which helps doors align when the cabinet is shimmed and leveled. Vinyl-covered inside back panels in 1/2 inch plywood are glued and nailed in their own 1/2 inch dado, then stapled to the hang rail and cabinet bottom, giving the rear edge a firm surface for fastening to wall studs. The 4-1/2 inch high by 4-1/16 inch deep toekick creates room at the floor for leveling adjustments while still supporting typical countertop height.
The Dartmouth 30 inch base cabinet layout uses one drawer above two butt doors, which suits many sink-base and work-base positions in a kitchen run. With a 30 inch width, it can bridge between adjacent cabinets while still leaving room for appliances in a standard design. The 24 inch depth aligns with common countertop depths, helping the front maple frame sit flush with neighboring units. A cabinet height of 34-1/2 inches supports use in installations designed for typical countertop heights when combined with standard thickness tops. The single adjustable half-depth shelf uses 3/4 inch plywood with bull-nosed, foil-covered front edges, holding stored items while leaving rear space available for mechanicals or deeper cookware within the same footprint.
Cabinet fronts made from 3/4 inch solid maple wood provide consistent material at all face-frame contact points, so hinges and drawer fronts mount into hardwood instead of composite. Rails that are pocket drilled and assembled with 1-1/4 inch screws produce a rigid frame that helps keep reveals even when adjoining cabinets are clamped together. Side panels and the bottom, formed from 1/2 inch plywood with matching exterior laminate, are glued and stapled in a 1/2 inch dado cut into the cabinet front frame, giving a long glue line that supports the box under the weight of contents and countertops. Back panels made from vinyl-covered, inside-only 1/2 inch plywood are glued and nailed into a 1/2 inch dado, then stapled to the hang rail and cabinet bottom, so the back shares load with the rest of the structure. All-wood 3/4 inch corner blocks at every corner tie the sides, front, and bottom together, helping the cabinet resist twisting during transport into the room and while it is being set, leveled, and secured. The half-depth adjustable shelf, built from 3/4 inch plywood with bull-nosed, foil-covered front edges, is held on self-locking 1/4 inch diameter clips on the sides, allowing quick height changes while keeping the shelf seated during normal use.
Classic Series Base Cabinets Brownstone, Dartmouth 30"W x 24"D x 34-1/2"H - Wolf 3036379 has a 30 inch width, 24 inch depth, and 34-1/2 inch height, fitting many standard base cabinet layouts.
The cabinet fronts are made from 3/4 inch solid maple wood, and the rails are pocket drilled and assembled with 1-1/4 inch screws, creating a durable frame for mounting doors and drawer.
This Dartmouth base cabinet has two butt doors, one drawer, and one adjustable half-depth shelf, offering a mix of drawer access and interior shelf storage in a single 30 inch unit.
Side panels and bottom use 1/2 inch plywood with matching exterior laminate in a 1/2 inch dado at the front frame, while vinyl-covered 1/2 inch plywood back panels are glued, nailed, and stapled to reinforce the box.
The half-depth shelf is 3/4 inch plywood with bull-nosed, foil-covered front edges, and it is held in place by self-locking 1/4 inch diameter clips on the cabinet sides for positional stability.
This base cabinet has a toekick that is 4-1/2 inches high by 4-1/16 inches deep on standard cabinets, creating space at the floor for comfortable standing at the countertop.
The Classic Series Base Cabinets Brownstone, Dartmouth 30"W x 24"D x 34-1/2"H - Wolf 3036379 combines a 30 inch footprint with 24 inch depth and 34-1/2 inch height for typical base layouts. With 3/4 inch solid maple cabinet fronts, a 1/2 inch plywood box, and a 4-1/2 inch high by 4-1/16 inch deep toekick, it is structured for use beneath standard countertops. Two butt doors, one drawer, and an adjustable half-depth 3/4 inch plywood shelf on self-locking clips provide flexible storage in one unit. Use this Dartmouth Brownstone cabinet when a Wolf Home Products Classic Series base is needed to align with matching fronts and standard installation dimensions.
Sold In: 1 Each