Classic Series base cabinet Brownstone Dartmouth describes a 36 inch wide, 24 inch deep, 34-1/2 inch high cabinet that builds a standard base run, so it aligns with common countertop and appliance layouts. The two butt doors and one drawer give separate storage zones, so small parts and tools stay in the drawer while bulk items sit behind the doors. A half-depth adjustable shelf inside creates a stepped storage area, so taller items can stand at the front while shorter pieces sit on the shelf behind. The Brownstone Dartmouth styling comes from the Classic Series line, so this cabinet visually matches other Wolf Home Products Classic Series units in the same finish. The cabinet is part of Wolf Home Products, so it fits into that coordinated cabinet offering on a project.
The Wolf Dartmouth 36 inch base cabinet size of 36 inches wide by 24 inches deep by 34-1/2 inches high sets it up for standard counter height, so it fits typical kitchen and workroom layouts. The two butt doors open across the front, so the full interior width is accessible for installing plumbing passes, pull-outs, or stored items. One drawer at the top spans the width, so lighter tools or supplies can be organized separately from the cabinet floor. The side panels, bottom panel, and back panel assemblies using 1/2 inch plywood in dados create a rigid shell, so the unit stays aligned when it is shimmed and fastened during installation. The toekick at 4-1/2 inches high by 4-1/16 inches deep provides a consistent lower profile, so front faces line up easily with adjacent standard base cabinets.
The 36x24 Dartmouth base cabinet format places a 36 inch wide footprint into a run, so it often becomes a main storage segment in a kitchen, laundry, or shop wall. The depth of 24 inches matches common base depth, so countertops sit properly over the cabinet and neighboring units. The 34-1/2 inch height leaves room for standard countertop thickness above, so finished work surfaces land at an expected working height. With two butt doors, the opening spans the full face, so access across the interior is clear for placing larger items or making adjustments to shutoffs and lines inside the cabinet. The single drawer above the doors uses the width efficiently, so smaller items can be sorted without taking space away from the main cavity. Because the cabinet is part of the Classic Series from Wolf Home Products, it serves in projects that use that line for visual continuity. The Brownstone Dartmouth styling tied to this series means similar cabinets can be used next to it, so runs and corners maintain a consistent appearance.
The cabinet fronts being 3/4 inch solid maple wood give the working faces weight and hardness, so hinge and drawer front fastening points engage solid material. Rails that are pocket drilled and assembled with 1-1/4 inch screws clamp the face frame together, so joints resist twisting when the cabinet is tightened into place. Side panels and the bottom made from 1/2 inch plywood with a matching exterior laminate are glued and stapled into a 1/2 inch dado in the cabinet front frame, so the panels lock into the frame and help maintain squareness along the height and width. Back panels of vinyl-covered 1/2 inch plywood are glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom, so the back ties into both the top structure and the lower frame. All-wood 3/4 inch corner blocks at all corners connect the frame and panels, so loads from countertops and stored contents distribute into the corners rather than any single joint. The half-depth adjustable shelf uses 3/4 inch plywood with a bull-nosed, foil-covered front edge, so the front of the shelf has a smooth, finished edge that interacts cleanly with items being moved in and out. Shelf support with self-locking 1/4 inch diameter clips on the sides fixes the shelf height, so it sits firmly when positioned. The toekick built at 4-1/2 inches high by 4-1/16 inches deep sets a defined recess at the base, so the cabinet can be aligned in a row where user foot space at the base must match from cabinet to cabinet.
The Wolf Dartmouth base cabinet measures 36 inches wide, 24 inches deep, and 34-1/2 inches high, so it matches standard base cabinet and countertop height layouts.
The cabinet box uses 1/2 inch plywood sides, bottom, and back set in 1/2 inch dados, glued, stapled, and nailed, so the case stays rigid when loaded and fastened into a run.
The cabinet fronts are 3/4 inch solid maple wood, so door and drawer faces provide a hardwood surface for hinges, pulls, and regular handling.
The adjustable half depth shelf rests on self-locking 1/4 inch diameter clips on the cabinet sides, so the shelf sits securely at the chosen height under normal use.
This Dartmouth base cabinet has two butt doors, one drawer, and one adjustable half-depth shelf, so it offers both open interior space and segmented storage.
The toekick is 4-1/2 inches high by 4-1/16 inches deep, so front faces align with other standard base cabinets and users have room for their feet at the base.
The Classic Series base cabinet Brownstone Dartmouth, in a 36 inch wide by 24 inch deep by 34-1/2 inch high format, combines two butt doors, one drawer, and an adjustable half-depth shelf, so it supports both general storage and organized access. Construction using 3/4 inch solid maple fronts, 1/2 inch plywood panels in dados, and 3/4 inch corner blocks creates a cabinet ready to carry countertops and contents within a run. Choosing this Wolf Dartmouth 36 inch base cabinet lets projects use the Classic Series structure and Brownstone Dartmouth styling where a full-width base cabinet is needed.
Sold In: 1 Each