Classic Series Base Cabinets Brownstone gives you a Dartmouth 39 inch wide base cabinet built for everyday kitchen work. The cabinet combines two doors with a center stile and two drawers, so you get both door-access storage and drawer organization in one run. Cabinet fronts are made from 3/4 inch solid maple wood, providing a hardwood work face that stands up to repeated use around cooking, prep, and cleanup zones. Rails are pocket drilled and assembled with 1 1/4 inch screws for rugged durability, creating a tight, rigid face frame that holds alignment during installation and over time. Side panels and the bottom are 1/2 inch plywood with matching exterior laminate, glued and stapled into a 1/2 inch dado in the cabinet front frame, so the box stays square under load. Back panels are vinyl-covered inside 1/2 inch plywood, glued and nailed into a 1/2 inch dado and stapled to the hang rail and bottom, tying the cabinet together into a solid unit.
The Wolf Dartmouth 39 inch Brownstone base cabinet measures 39 inches wide, 24 inches deep, and 34-1/2 inches high, so it fits standard base runs and standard countertop depths in kitchen layouts. The 4-1/2 inch high by 4-1/16 inch deep toekick on standard cabinets matches common toe space dimensions, allowing clean alignment with adjacent bases and straightforward trimming of toekick faces. Side panels and the bottom set into a 1/2 inch dado in the front frame, giving installers a consistent reference edge when pulling cabinets tight in a line. The vinyl-covered plywood back is glued, nailed into a 1/2 inch dado, and stapled to the hang rail and bottom, so the cabinet resists twisting as it is shimmed and fastened on uneven floors. All-wood 3/4 inch corner blocks at every corner further stabilize the box while tops are set and seams are drawn tight.
The Wolf Dartmouth base cabinet in Brownstone with two doors, a center stile, and two drawers is sized for use as a 39 inch base in kitchen runs where both drawer storage and door-access space are needed. The 24 inch depth matches standard countertop depth, so the cabinet sits correctly under work surfaces in cooking or prep areas. The 34-1/2 inch height pairs with standard countertop thickness to reach typical finished counter height, creating a continuous work surface across multiple base units. The half-depth adjustable shelf in 3/4 inch plywood leaves open floor space at the back of the cabinet while still providing a storage level, which helps when routing plumbing or keeping larger items accessible near the front. Self-locking 1/4 inch diameter clips hold the shelf on the sides, so once set, shelf levels stay put during daily loading and unloading.
Cabinet fronts made from 3/4 inch solid maple wood provide a solid anchoring base for hinges and drawer fronts, which supports consistent reveals and smoother operation after installation. Rails that are pocket drilled and assembled with 1 1/4 inch screws tie the frame together with strong joints, helping the cabinet stay square while being moved into the jobsite and fastened in place. Side panels and the bottom, built from 1/2 inch plywood with matching exterior laminate and set in a 1/2 inch dado, create a tight connection with the front frame, so the cabinet resists spreading when loaded with cookware or supplies. The vinyl-covered 1/2 inch plywood back, glued, nailed into its 1/2 inch dado, and stapled to the hang rail and bottom, adds another structural plane that resists racking along the wall. All-wood 3/4 inch corner blocks at every corner further lock the geometry of the cabinet, which is important when countertops are installed and weight is carried along the front. The half-depth adjustable shelf, made from 3/4 inch plywood with bull-nosed, foil-covered front edges, offers a smooth front that handles contact from stored items while the shelf thickness helps it stay flat under everyday loads.
The cabinet is 39 inches wide, 24 inches deep, and 34-1/2 inches high, so it fits standard kitchen base layouts and works under typical countertop depths and heights.
The cabinet fronts are made from 3/4 inch solid maple wood, giving a sturdy hardwood surface that supports secure hinge and drawer front attachment in daily use.
Side panels and the bottom are 1/2 inch plywood, glued and stapled into a 1/2 inch dado in the front frame, and reinforced with all-wood 3/4 inch corner blocks at all corners.
The interior uses a half-depth adjustable shelf made from 3/4 inch plywood with bull-nosed, foil-covered front edges, supported by self-locking 1/4 inch diameter clips on the sides.
The back panel is vinyl-covered on the inside, made from 1/2 inch plywood, glued and nailed into a 1/2 inch dado, and stapled to the hang rail and cabinet bottom.
The toekick is 4-1/2 inches high by 4-1/16 inches deep on standard cabinets, aligning with common kitchen toe space dimensions along a base run.
The Classic Series Base Cabinets Brownstone Dartmouth 39 inch unit from The Wolf Organization, LLC combines 3/4 inch solid maple fronts, pocket-screwed rails, and 1/2 inch plywood box construction to support a solid base in kitchen runs. Two doors with a center stile, two drawers, and a half-depth adjustable 3/4 inch plywood shelf give a mix of storage options at this width. Vinyl-covered 1/2 inch plywood back panels, 3/4 inch all-wood corner blocks, and a 4-1/2 inch by 4-1/16 inch toekick tie into everyday installation and use, so this Wolf 3036376 cabinet fits standard dimensions while delivering a rigid base for countertops.
Sold In: 1 Each