Classic Series base cabinets Brownstone Dartmouth describes this 24 inch wide Wolf Dartmouth base cabinet built for standard base runs. The 24 inch depth and 34-1/2 inch height place the cabinet in a typical kitchen base layout, so it drops into standard counter lines without odd transitions. Two butt doors on the front give full-width access to the interior, which helps when loading larger items into the base space. One drawer above the doors adds a separate storage zone, keeping smaller tools or parts out of the main cavity. The single adjustable half-depth shelf divides the vertical space while still leaving a clear area at the front, so taller items can stand in front of the shelf. This configuration keeps the cabinet working as a general-purpose base unit in a Brownstone finish within the Classic Series.
The adjustable half-depth shelf in this Wolf 3036381 Dartmouth cabinet is built from 3/4 inch plywood with a bull-nosed, foil-covered front edge, so it adds usable storage while keeping a smooth leading edge at the front opening. Because the shelf runs only half depth, there is remaining open floor space at the front of the cabinet interior, allowing taller items or tools to stand without interference from the shelf. The shelf is held in place with self-locking 1/4 inch diameter clips on the sides, so it sits in defined positions and resists accidental dislodging once set to the desired height. This combination of half-depth design and positive holding clips lets the installer choose a shelf position that matches the expected load while keeping access to the lower cavity clear.
This Classic Series Base Cabinets Brownstone, Dartmouth 24 inch wide by 24 inch deep by 34-1/2 inch high unit from The Wolf Organization, LLC fits straight into runs that follow common base cabinet dimensions, so it aligns with standard countertop depths and heights. The two butt doors on the front open to a shared interior, which simplifies placing wider items that span more than half the cabinet width. One upper drawer adds a dedicated zone above the doors, giving a separate compartment for smaller kitchen or shop items that benefit from being kept within reach. Inside the door area, the half-depth adjustable shelf divides storage vertically while still leaving an open area at the front, making it easier to stage heavier pieces on the cabinet bottom and lighter items toward the rear. The Brownstone Dartmouth styling ties this base unit into the broader Wolf Home Products cabinet line, supporting consistent appearance across an installation that uses the same series.
The cabinet fronts made from 3/4 inch solid maple wood provide a robust attachment surface for hinges and drawer hardware, which supports consistent door and drawer alignment across the front frame. Rails that are pocket drilled and assembled with 1-1/4 inch screws pull the frame joints tightly together, so the face of the cabinet stays square when adjoining cabinets are pulled into a run. Side panels and bottom formed from 1/2 inch plywood, glued and stapled into a 1/2 inch dado in the front frame, create a strong mechanical lock between the box and face frame that holds alignment when the cabinet is leveled and shimmed. Back panels made from vinyl-covered 1/2 inch plywood on the inside, glued and nailed into a 1/2 inch dado and stapled to the hang rail and cabinet bottom, add rigidity so the cabinet backs remain flat when anchoring into wall studs. All-wood 3/4 inch corner blocks at every corner tie the assembly together, helping the cabinet keep its shape under countertop loads. The half-depth 3/4 inch plywood shelf with bull-nosed, foil-covered front edge presents a finished leading edge that aligns neatly with the door opening, while the self-locking 1/4 inch diameter clips hold the shelf reliably at the chosen height under normal shelf loads. The 4-1/2 inch high by 4-1/16 inch deep toekick dimension matches typical base elevations, giving a predictable front profile when aligning adjacent cabinets and finishing the toe space.
The Classic Series Base Cabinets Brownstone, Dartmouth unit measures 24 inches wide, 24 inches deep, and 34-1/2 inches high, so it fits standard base cabinet height and depth layouts beneath typical countertops.
The cabinet uses 3/4 inch solid maple fronts with rails pocket drilled and fastened using 1-1/4 inch screws, plus 1/2 inch plywood sides and bottom in 1/2 inch dados, creating a rigid face-frame box connection.
Side panels and bottom are 1/2 inch plywood with matching exterior laminate, while back panels are vinyl-covered 1/2 inch plywood on the inside, giving a finished interior surface and structural box strength.
The 3/4 inch plywood half-depth shelf has a bull-nosed, foil-covered front edge and is supported by self-locking 1/4 inch diameter clips, allowing height adjustment while keeping the front opening clear for taller items.
All-wood 3/4 inch corner blocks are installed at all corners, tying the cabinet frame and panels together to help maintain squareness under countertop and storage loads.
The toekick on this standard cabinet is 4-1/2 inches high by 4-1/16 inches deep, providing typical foot clearance and a consistent base profile along a cabinet run.
This Wolf 3036381 Dartmouth base cabinet from Wurth Baer Supply combines a 24 inch width, 24 inch depth, and 34-1/2 inch height with a two-door, one-drawer layout and an adjustable half-depth shelf. The 3/4 inch solid maple fronts, 1/2 inch plywood box construction, vinyl-covered 1/2 inch plywood back, and 3/4 inch corner blocks create a cabinet structure built around a rigid face frame. For projects calling for a Classic Series Brownstone Dartmouth look with standard base dimensions, this configuration offers a defined storage layout, a predictable toekick height of 4-1/2 inches, and construction details that support alignment within a run. Put this unit into service where a 24 inch base footprint and the Wolf Dartmouth styling are needed in the overall cabinet plan.
Sold In: 1 Each