Classic Series drawer base cabinet in the Dartmouth Brownstone style from The Wolf Organization, LLC provides a 12 inch wide, 34-1/2 inch high base solution for projects that need a narrow drawer stack with consistent appearance through a run of cabinets. The cabinet uses three drawers, so storage is organized vertically, which helps separate tools, utensils, or small parts by task. Cabinet fronts are made from 3/4 inch solid maple wood, giving each drawer front a solid face that resists day-to-day contact in typical shop or kitchen environments. Rails are pocket drilled and assembled with 1-1/4 inch screws, creating a mechanically fastened face frame that stays rigid when drawers are opened and closed repeatedly. Side panels and bottom use 1/2 inch plywood with a matching exterior laminate, forming a structural box that supports the drawer stack while presenting a coordinated Brownstone exterior surface. This combination delivers a cabinet that ties appearance and structure together for built-in runs.
The 12 inch width and 34-1/2 inch height give installers a predictable base cabinet size that drops into standard layouts where a narrow drawer unit is required. Side panels and bottom set into a 1/2 inch dado in the cabinet front frame provide positive registration during placement, supporting a square box that lines up cleanly with adjoining cabinets. The back panel is stapled to the hang rail and cabinet bottom, so the cabinet forms a defined attachment zone along the back for securing to wall structure. A half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges lets installers position the shelf to clear plumbing or wiring in the rear of the cabinet while still adding storage toward the front. Self-locking 1/4 inch diameter clips on the sides hold the shelf in place, allowing simple repositioning without tools during final layout.
This Classic Series drawer base cabinet is 12 inches wide and 34-1/2 inches high, so it fits into narrow base spaces where full-width units are not practical but a functional drawer stack is still needed. Three drawers create vertical storage zoning, which fits well at the end of a run, beside ranges, or in utility areas where smaller tools and parts benefit from separation. Side panels and bottom of 1/2 inch plywood with matching exterior laminate allow the cabinet to align visually with adjoining Brownstone-finished cabinets, helping maintain an unbroken face across the entire run. The back panel of vinyl-covered 1/2 inch plywood gives a finished interior behind the drawers, which suits kitchen or shop storage where the back may remain visible when drawers are open. The toekick at 4-1/2 inches high by 4-1/16 inches deep matches standard cabinet bases, so the cabinet ties into typical toe space details across a line of Wolf Home Products cabinets.
Rails that are pocket drilled and assembled with 1-1/4 inch screws create a strong face frame, which keeps the three drawer openings aligned so drawer fronts can be set with even reveals along a run of cabinets. Side panels and bottom glued and stapled into a 1/2 inch dado in the cabinet front frame give the box a fixed geometry, helping maintain square corners during handling, setting, and fastening to neighboring cabinets. All-wood 3/4 inch corner blocks installed on all corners reinforce that geometry at each junction, which is important when countertops are placed on the cabinet and when drawers are repeatedly cycled under load. The half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges provides a sturdy surface at the front of the cabinet while leaving open space at the rear for services or taller stored items. Self-locking 1/4 inch diameter clips on the sides hold the adjustable shelf securely, so the selected height remains stable during daily use yet can be repositioned during layout changes. The toekick at 4-1/2 inches high by 4-1/16 inches deep creates a consistent recess for user foot space and base trim, helping toe space lines stay continuous across adjoining cabinets.
The cabinet is 12 inches wide and 34-1/2 inches high, giving a narrow, full-height base unit that fits standard counter heights and tight layout spots.
The cabinet uses three drawers, which divides the vertical space into separate storage zones for smaller items that benefit from organized access.
Cabinet fronts are made from 3/4 inch solid maple wood, providing a robust face that handles frequent opening and closing in everyday cabinet use.
Side panels and bottom are 1/2 inch plywood glued and stapled in a 1/2 inch dado, and 3/4 inch corner blocks reinforce all corners for a rigid box.
A half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges provides front storage while leaving rear clearance.
Back panels are vinyl-covered 1/2 inch plywood, glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom for stability.
This Classic Series drawer base cabinet in Dartmouth Brownstone from The Wolf Organization, LLC combines three-drawer storage with a 12 inch wide, 34-1/2 inch high form that suits tight base positions. Solid maple 3/4 inch cabinet fronts and pocket-drilled rails fastened with 1-1/4 inch screws provide a face frame built for repeated drawer use along active cabinet runs. Side panels and bottom of 1/2 inch plywood with matching exterior laminate, tied into a 1/2 inch dado, create a box that stays square as it is installed beside other Wolf Home Products cabinets. With a half-depth adjustable 3/4 inch plywood shelf on self-locking 1/4 inch clips and a 4-1/2 inch high by 4-1/16 inch deep toekick, this Wolf 3036374 drawer base cabinet is ready to serve as the narrow drawer stack in your next Brownstone layout.
Sold In: 1 Each