Classic Series Drawer Base Cabinets Brownstone gives you a Dartmouth-style 18 inch wide, 34-1/2 inch high drawer base that provides organized lower storage in a matching Wolf Home Products layout. The three drawers described in the web description concentrate storage vertically, which helps when planning base runs where pull-out access is preferred over doors. Cabinet fronts made from 3/4 inch solid maple wood create a stable face for drawer hardware, which supports consistent alignment along adjoining cabinets. The rails are pocket drilled and assembled with 1-1/4 inch screws for rugged durability, so the front frame stays tight under normal opening and closing loads. Side panels and bottom are 1/2 inch plywood with matching exterior laminate, glued and stapled into a 1/2 inch dado in the cabinet front frame, which forms a rigid box that resists racking when the cabinet is set, shimmed, and fastened in place.
The 18 inch wide, 34-1/2 inch high format defines how this Wolf Home Products drawer base fits alongside adjacent cabinets in a standard run, which is important when laying out base modules under a common countertop. The toekick at 4-1/2 inches high by 4-1/16 inches deep on standard cabinets sets the front footprint, so you can align toe space and finished panels with neighboring boxes for a straight visual line at floor level. Side panels and bottom built from 1/2 inch plywood in a 1/2 inch dadoed front frame create a solid structure that responds predictably when shimming under the cabinet and fastening through the frame into wall studs. All-wood 3/4 inch corner blocks in all corners add support where installers typically place shims or blocking, which contributes to stable bearing under countertop weight.
The Dartmouth Brownstone 18 inch drawer base cabinet works in layouts that call for a narrow base with three drawers, such as flanking a range or fitting between larger bases. The 34-1/2 inch height matches standard base heights before countertop, which helps keep work surfaces on a consistent plane across mixed configurations. The 4-1/2 inch high by 4-1/16 inch deep toekick on this Classic Series Drawer Base Cabinets Brownstone unit coordinates with other standard cabinets, so the front recess lines up when cabinets are ganged together in a run. Side and bottom panels of 1/2 inch plywood with matching exterior laminate allow this cabinet to sit against adjacent units while maintaining a finished look on exposed ends when paired with field trim. Vinyl-covered interior faces on the 1/2 inch plywood back panel present a wipe-friendly inside surface, which is useful in kitchen or similar storage locations where interior cleanliness is important.
Cabinet fronts of 3/4 inch solid maple wood give a dense material for fastening drawer hardware, which helps maintain alignment over time as drawers cycle. Rails that are pocket drilled and assembled with 1-1/4 inch screws for rugged durability keep the face frame tight at its joints, which supports consistent reveals when the cabinet is pulled into plane with its neighbors. Side panels and bottom glued and stapled into a 1/2 inch dado in the cabinet front frame lock those panels to the frame, so the box resists spreading when fasteners are driven through the frame into structure. Back panels made from 1/2 inch plywood, glued and nailed into a 1/2 inch dado and stapled to both hang rail and bottom, add a continuous shear surface that helps the cabinet stay square when hoisted, positioned, and fixed. All-wood 3/4 inch corner blocks at every corner give additional bearing points under the top, which matters where countertops will rest directly on the cabinet. The half-depth adjustable shelf of 3/4 inch plywood, with bull-nosed, foil-covered front edges and self-locking 1/4 inch diameter clips, offers a sturdy, repositionable surface that can be set to clear plumbing or utilities while still providing storage.
The Classic Series Drawer Base Cabinets Brownstone, Dartmouth, model 3036372 is 18 inches wide and 34-1/2 inches high, which suits standard base cabinet runs beneath typical countertops.
This drawer base uses three drawers, concentrating storage in a vertical stack so items can be accessed from the front without opening doors.
The cabinet fronts are made from 3/4 inch solid maple wood, providing a stable, dense face for installing and adjusting drawer hardware.
The cabinet uses 1/2 inch plywood side panels, bottom, and back set in 1/2 inch dados, glued, stapled, and nailed to the front frame, hang rail, and bottom for a rigid box.
The half-depth adjustable shelf is 3/4 inch plywood with bull-nosed, foil-covered front edges, giving partial-depth storage while keeping rear space open for typical services.
The toekick is 4-1/2 inches high by 4-1/16 inches deep on standard cabinets, aligning cabinet front recess with other Wolf Home Products bases.
The Wolf 3036372 drawer base cabinet combines a three-drawer layout with 3/4 inch solid maple cabinet fronts and a plywood box, which suits projects needing a Dartmouth Brownstone look with sturdy lower storage. The 18 inch width and 34-1/2 inch height allow this Classic Series Drawer Base Cabinets Brownstone unit to slot into standard base runs where a narrower drawer stack is required. A 4-1/2 inch high by 4-1/16 inch deep toekick and matching exterior laminate on the 1/2 inch plywood sides support clean alignment with adjoining Wolf Home Products cabinets. For installations calling for solid construction, defined dimensions, and a three-drawer base in this finish, this model offers a precise, documented option.
Sold In: 1 Each