Classic Series drawer base cabinet from Wolf Home Products provides a three drawers layout that organizes lower-cabinet storage, so tools, fasteners, or kitchen items stack in separate pull-out spaces instead of loose in one deep base. The 15 inch width and 34-1/2 inch height size this Dartmouth Brownstone cabinet for standard base runs, so it drops into typical layouts without reworking surrounding cabinet heights. Cabinet fronts are made from 3/4 inch solid maple wood, which gives a hard, stable face frame and drawer appearance that tolerates daily opening and closing in busy shops or kitchens. The Wolf Dartmouth Brownstone drawer base uses rails that are pocket drilled and assembled with 1-1/4 inch screws for rugged durability, so the face frame joints stay tight under loaded drawers and repeated use. Side panels and bottom use 1/2 inch plywood with matching exterior laminate, giving a stiff carcass that resists racking while presenting a finished outer surface during install.
Wolf Home Products drawer base cabinets use side panels and bottom that are glued and stapled in a 1/2 inch dado in the cabinet front frame, so the carcass locates positively into the frame for easier squaring during setting and fastening. Back panels made from vinyl-covered 1/2 inch plywood are glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom, tying the back into the top and base for better wall anchoring. All-wood 3/4 inch corner blocks installed on all corners give solid bearing at critical joints, which helps the cabinet stay true when shimmed on uneven floors. A 4-1/2 inch high by 4-1/16 inch deep toekick on standard cabinets aligns with common base heights, so the front sits correctly against finish flooring while leaving room for feet or toe clearance along the run.
The 15 inch drawer base cabinet size fits narrow sections of a layout, so it fills gaps between larger bases while still delivering functional drawer storage. Three drawers in this cabinet give vertical organization in tight spaces, which helps assign specific drawers to hand tools, fasteners, or kitchen utensils instead of stacking them together. The half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges sits in the cabinet, so it supports mid-level storage behind the drawers while leaving clearance for plumbing or other services at the back. The shelves are held in place with self-locking 1/4 inch diameter clips on the sides, which let the installer reposition shelf height without extra drilling while still locking the shelf against accidental dislodging under load.
Side panels and bottom made from 1/2 inch plywood glued and stapled in a 1/2 inch dado in the cabinet front frame position the box consistently, which simplifies lining up faces across multiple Classic Series drawer base cabinet units in a run. Matching exterior laminate on the side panels provides a ready-to-show surface, which avoids additional finishing steps once the cabinet is fastened. Back panels of vinyl-covered 1/2 inch plywood, glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom, create a continuous back plane that helps keep the cabinet square from floor to hang rail. All-wood 3/4 inch corner blocks installed on all corners reinforce every intersection of frame and box, which supports countertop loads and reduces flexing when drawers are extended. The 4-1/2 inch high by 4-1/16 inch deep toekick matches standard base cabinet expectations, which helps align this 3036373 drawer base cabinet with adjacent Wolf Home Products pieces along the floor line.
The Classic Series drawer base cabinet is 15 inches wide and 34-1/2 inches high, so it matches standard base cabinet dimensions in typical kitchen or shop layouts.
The Wolf Dartmouth Brownstone drawer base has three drawers, which divides lower storage into separate pull-out levels for organizing tools, parts, or kitchen items.
Cabinet fronts are made from 3/4 inch solid maple wood, providing a hard, stable face that resists wear where hands and equipment contact the cabinet most.
The cabinet uses 1/2 inch plywood side panels and bottom set in 1/2 inch dados, with glued and stapled joints and 3/4 inch corner blocks, creating a rigid box for loaded drawers.
The half-depth adjustable shelf of 3/4 inch plywood is held by self-locking 1/4 inch diameter clips on the sides, allowing height changes while keeping the shelf seated.
The drawer base uses a toekick that is 4-1/2 inches high by 4-1/16 inches deep, aligning with standard base cabinet toe space along a run of cabinets.
The Wolf Home Products drawer base cabinet in the Dartmouth Brownstone style combines three drawers, solid maple cabinet fronts, and 1/2 inch plywood construction, so it delivers organized base storage built around familiar dimensions. The 4-1/2 inch high toekick and 34-1/2 inch cabinet height let this unit sit cleanly in typical runs, while the self-locking shelf clips and 3/4 inch corner blocks support daily use. Select this Wolf Dartmouth Brownstone drawer base when a 15 inch wide, three-drawer layout with solid wood fronts and plywood construction aligns with your cabinet run and storage plan.
Sold In: 1 Each