Classic Series drawer base cabinet Brownstone, Dartmouth, 36 inch W x 34-1/2 inch H gives you a three-drawer base built for daily kitchen or shop use. The three drawers concentrate storage in one 36 inch footprint, which helps organize tools, utensils, or parts directly under the work surface. Cabinet fronts made from 3/4 inch solid maple wood present a hard, stable face that resists routine edge impacts in busy work areas. Rails that are pocket drilled and assembled with 1-1/4 inch screws create tight joints that resist racking when drawers are loaded. Side panels and bottom made from 1/2 inch plywood with matching exterior laminate provide a rigid box while presenting a finished Brownstone look to the room side. Back panels made from vinyl-covered 1/2 inch plywood on the inside create a clean interior surface that wipes down easily after projects.
The cabinet size of 36 inch W x 34-1/2 inch H sets it up for standard base runs and typical counter heights, simplifying layout with adjacent units. The toekick at 4-1/2 inch high x 4-1/16 inch deep on standard cabinets gives toe clearance at the front, which allows users to stand closer to the work surface during tasks. Side panels and the bottom, glued and stapled into a 1/2 inch dado in the cabinet front frame, form a strong front connection that keeps reveal lines steadier when the unit is leveled. Back panels glued and nailed into a 1/2 inch dado and stapled to the hang rail and cabinet bottom give a firm surface for fastening to structure, helping the cabinet stay plumb along the run. All-wood 3/4 inch corner blocks at every corner reinforce squareness as shims are applied.
The Wolf Dartmouth Brownstone drawer base cabinet with three drawers concentrates storage in a 36 inch wide footprint, which suits kitchen bases, laundry areas, or shop stations needing broad drawer access. The 34-1/2 inch height works with standard countertop setups, positioning the drawers at a practical reach height in most residential or light commercial spaces. Side panels and bottom in 1/2 inch plywood with matching exterior laminate give a finished exterior face, so the cabinet can terminate a run or bridge transitions without extra panel work. Vinyl-covered 1/2 inch plywood back panels on the inside create a smooth, uniform interior surface that supports organized storage and straightforward cleaning between jobs. The 4-1/2 inch high x 4-1/16 inch deep toekick on standard cabinets lets users step in closer to the front, which helps when loading lower drawers with heavier items.
Cabinet fronts made from 3/4 inch solid maple wood provide a rigid reference for aligning doors, drawer fronts, and adjacent units, which helps maintain consistent reveals along a run. Rails that are pocket drilled and assembled with 1-1/4 inch screws tie the frame together with mechanical fasteners, so the front remains square when exposed to drawer cycling over time. Side panels and bottom glued and stapled in a 1/2 inch dado in the cabinet front frame distribute loads into the frame, which helps the cabinet resist sagging under countertop or stored weight. Back panels made from vinyl-covered 1/2 inch plywood, glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom, add a second plane of bracing that supports plumb, flat alignment along walls. All-wood 3/4 inch corner blocks installed on all corners further tie the frame and box together, helping the cabinet handle movement during handling and setting without losing square. The half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges lets installers position storage around plumbing or utilities, improving usable space without cutting into the cabinet structure. Self-locking 1/4 inch diameter clips holding the shelf on the sides keep the shelf stable at the chosen height, which matters when loading it with dishes, supplies, or small tools.
The Classic Series drawer base cabinet Brownstone, Dartmouth, measures 36 inches wide by 34-1/2 inches high, so it matches standard base cabinet height in many kitchen and workroom layouts.
The Wolf Dartmouth Brownstone drawer base cabinet has three drawers, which concentrates storage in one base unit for utensils, supplies, or tools along a cabinet run.
The cabinet fronts are made from 3/4 inch solid maple wood, giving a hard, stable face frame that holds hardware securely and stands up to everyday contact.
The rails are pocket drilled and assembled with 1-1/4 inch screws, creating tight mechanical joints that help the front frame resist racking under loaded drawer use.
The side panels and bottom are 1/2 inch plywood with matching exterior laminate, glued and stapled into a 1/2 inch dado for a rigid, aligned cabinet box.
The cabinet has a half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges, supported by self-locking 1/4 inch diameter clips on the sides.
The Wolf Dartmouth Brownstone Classic Series drawer base cabinet 36 inch W x 34-1/2 inch H offers three drawers in a solid maple front frame with 1/2 inch plywood sides, bottom, and back. Rails pocket drilled and assembled with 1-1/4 inch screws, plus all-wood 3/4 inch corner blocks, create a rigid box suited to daily use along a base run. A half-depth adjustable shelf of 3/4 inch plywood on self-locking 1/4 inch clips adds flexible interior storage above the drawers. The 4-1/2 inch high x 4-1/16 inch deep toekick supports a comfortable working stance in front of the cabinet, making this unit a practical choice wherever concentrated drawer storage is needed.
Sold In: 1 Each