Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Classic Series drawer base cabinet defines this Wolf Dartmouth Brownstone unit as a 21 inch wide, 34-1/2 inch high base cabinet with three drawers, so it fills a standard base opening while giving a bank of drawers for organized storage. The cabinet fronts are made from 3/4 inch solid maple wood, which provides a stable face for drawer fronts where fasteners and hardware hold well over repeated use. Rails are pocket drilled and assembled with 1-1/4 inch screws for rugged durability, creating a rigid face frame that helps drawers track consistently and keeps the front square during installation. Side panels and bottom use 1/2 inch plywood with matching exterior laminate, glued and stapled in a 1/2 inch dado in the cabinet's front frame, so the case ties into the frame mechanically and with adhesive for better box integrity. Back panels are vinyl-covered inside 1/2 inch plywood, glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom, forming a closed box that resists racking once set in a run.
Side panels and bottom built from 1/2 inch plywood with matching exterior laminate and captured in a 1/2 inch dado in the front frame give this drawer base clear reference faces along the cabinet sides for alignment during layout. The back panels are glued and nailed into a 1/2 inch dado and stapled to the hang rail and cabinet bottom, which creates defined top and bottom edges for shimming to walls or bases. All-wood 3/4 inch corner blocks on all corners add structure at the top and bottom intersections, which is useful when clamping cabinets together or adjusting them on shims. The toekick is 4-1/2 inches high by 4-1/16 inches deep on standard cabinets, so the front recess height and depth are predictable when laying out runs, flooring transitions, and baseboard intersections.
This Wolf Dartmouth Brownstone drawer base cabinet is 21 inches wide and 34-1/2 inches high, which suits standard base cabinet layouts in kitchens, shops, or workrooms laid out around typical counter heights. Three drawers mean the vertical space in this footprint is dedicated to segmented storage, which suits situations where tools, utensils, hardware, or supplies need to be separated rather than stacked on shelves. The side panels and bottom in 1/2 inch plywood with matching exterior laminate create finished sides, so the cabinet can sit at the end of a run or against an appliance opening where exposed cabinet sides are visible. Back panels made from vinyl-covered inside 1/2 inch plywood provide an interior surface that is easy to wipe down, which fits utility areas and kitchens where residue and dust collect behind stored items.
Rails that are pocket drilled and assembled with 1-1/4 inch screws form a rigid face frame, so when this cabinet is pulled into alignment with adjacent units, the frame holds its shape and supports straight, uniform reveals. The case sides and bottom are glued and stapled into 1/2 inch dados in the cabinet's front frame, tying the box into the frame so the cabinet resists spreading under loaded drawers. All-wood 3/4 inch corner blocks installed on all corners add triangulation at the top and bottom, which is helpful when shimming and tightening fasteners because the box resists twist. The half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges provides a structural storage surface behind the lower door area while leaving room for plumbing or deeper stored items toward the back. The shelves are held with self-locking 1/4 inch diameter clips on the sides, creating a positive engagement at each support point so shelf positions can be set at different heights without play. The toekick height of 4-1/2 inches and depth of 4-1/16 inches on standard cabinets offers a consistent recess for feet and for running finishes across cabinet fronts, which simplifies layout of repeated base units in a straight line.
The Classic Series drawer base cabinet is 21 inches wide and 34-1/2 inches high, so it fits standard base cabinet runs designed around typical counter heights and 21 inch modules.
The cabinet fronts are 3/4 inch solid maple wood and the rails are pocket drilled and assembled with 1-1/4 inch screws, giving a strong frame that keeps drawer fronts aligned under everyday use.
The side panels and bottom use 1/2 inch plywood with matching exterior laminate, glued and stapled in a 1/2 inch dado in the front frame, forming a solid, integrated box.
The back panel is vinyl-covered inside 1/2 inch plywood, glued and nailed into a 1/2 inch dado and stapled to the hang rail and cabinet bottom, which helps the cabinet resist racking.
The cabinet uses a half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges, supported by self-locking 1/4 inch diameter clips for secure, adjustable storage.
The toekick is 4-1/2 inches high and 4-1/16 inches deep on standard cabinets, giving a consistent recess for aligning flooring, trim, and adjacent base units.
The Classic Series drawer base cabinet in the Wolf Dartmouth Brownstone line combines three drawers with a 21 inch wide, 34-1/2 inch high footprint, so it slots into standard base layouts while dedicating the opening to organized, segmented storage. Construction built around 3/4 inch solid maple cabinet fronts, pocket-drilled rails with 1-1/4 inch screws, and 1/2 inch plywood case parts in dados delivers a rigid box that supports drawer function. The half-depth 3/4 inch plywood shelf with bull-nosed, foil-covered front edge and self-locking 1/4 inch diameter clips adds adjustable storage behind the lower door space. The 4-1/2 inch high by 4-1/16 inch deep toekick and all-wood 3/4 inch corner blocks help this unit integrate cleanly into straight runs. Use this cabinet when the project calls for a Wolf Home Products drawer base that aligns with these verified construction details.
Sold In: 1 Each