Classic Series Wall Cabinets Brownstone gives you a Dartmouth 15 inch wide by 12 inch deep by 42 inch high wall cabinet built for everyday cabinet runs. The single door layout concentrates storage into a tall, narrow footprint, which fits well between obstacles or beside range hoods. Three adjustable shelves let you set clearances for dishes, pantry items, or tall bottles without wasting vertical space. Cabinet fronts made from 3/4 inch solid maple wood create a sturdy working face for the door, supporting hinge mounting and repeated use. Rails that are pocket drilled and assembled with 1-1/4 inch screws develop a rigid front frame, which helps the cabinet stay square during installation. Side panels and bottom made from 1/2 inch plywood establish a solid box, and the matching exterior laminate keeps outer faces visually consistent along the wall.
Side panels and the bottom set in a 1/2 inch dado in the cabinet front frame are glued and stapled, which locks the box and face frame together into one unit during mounting. Back panels made from vinyl-covered 1/2 inch plywood are glued and nailed into a 1/2 inch dado, then stapled to the hang rail and cabinet bottom, so the back ties the top, bottom, and frame together along the wall. The shelves use 3/4 inch plywood with bull-nosed, foil-covered front edges, which gives a smoother front edge when sliding items on and off the shelf. Self-locking 1/4 inch diameter clips on the sides hold the shelves, so shelf positions stay fixed once set during layout.
The Dartmouth 15 inch wide by 12 inch deep by 42 inch high format suits tall wall sections where extra vertical storage is needed without taking much horizontal run. The 42 inch height helps fill the wall between standard countertops and higher soffits or ceilings, so the upper line looks continuous with other tall wall units. The single door setup removes a center stile, which keeps the full cabinet width open when the door swings, helpful for stacking plates or lining up cans in rows. The half-depth adjustable shelf design in 3/4 inch plywood lets light and reach extend toward the back of the cabinet, making items at the rear easier to see and grab. Bull-nosed, foil-covered front shelf edges create a defined edge, which helps reduce edge chipping as items are moved on and off the shelf. All-wood 3/4 inch corner blocks installed on all corners brace the cabinet, which supports the structure when the unit is fastened through the back and loaded after installation.
Cabinet fronts made from 3/4 inch solid maple wood provide a dense, thick face, which supports solid screw bite for hinges and helps doors stay aligned under regular use. Rails that are pocket drilled and pulled together with 1-1/4 inch screws build a tight face frame, so joints are less likely to open when the cabinet is lifted or when doors are operated. Side panels and the bottom made from 1/2 inch plywood are glued and stapled into a 1/2 inch dado in the front frame, forming a mechanical and adhesive joint that helps resist racking when the wall is uneven. Back panels made from vinyl-covered 1/2 inch plywood are glued and nailed into a 1/2 inch dado and stapled to the hang rail and cabinet bottom, so the back works as a shear panel against twisting. Self-locking 1/4 inch diameter clips on the sides support the shelves at the chosen height, which helps prevent accidental shelf movement after loading. The 4-1/2 inch high by 4-1/16 inch deep toekick specification on standard cabinets in this line helps coordinate this wall unit with matching base cabinets, so vertical proportions and reveals align across the kitchen or work area.
The Classic Series Wall Cabinets Brownstone, Dartmouth cabinet measures 15 inches wide by 12 inches deep by 42 inches high, which fits narrow wall sections while still supplying tall vertical storage.
The Classic Series Wall Cabinets Brownstone, Dartmouth unit has three adjustable shelves, so interior spacing can be arranged for dishes, pantry goods, or other items with different heights.
The Classic Series Wall Cabinets Brownstone, Dartmouth cabinet fronts are made from 3/4 inch solid maple wood, providing a strong face frame surface for hinges and daily door use.
The Classic Series Wall Cabinets Brownstone, Dartmouth side panels and bottom are 1/2 inch plywood, glued and stapled into a 1/2 inch dado in the cabinet front frame for a locked box structure.
The Classic Series Wall Cabinets Brownstone, Dartmouth shelves rest on self-locking 1/4 inch diameter clips on the sides, which hold the 3/4 inch plywood shelves securely at the chosen height.
The Classic Series Wall Cabinets Brownstone, Dartmouth back panel uses vinyl-covered 1/2 inch plywood, glued and nailed in a 1/2 inch dado and stapled to the hang rail and bottom for added rigidity.
The Wolf Dartmouth Classic Series Wall Cabinets Brownstone, 15 inch wide by 12 inch deep by 42 inch high, combines a single door layout with three adjustable shelves to organize tall wall storage. Solid maple cabinet fronts, pocket-screwed rails, and 1/2 inch plywood sides and back form a rigid box that supports regular loading. Selecting this 3036516 unit lets wall sections align with other WOLF Home Products cabinets using the same construction details and toekick standards.
Sold In: 1 Each