Classic Series Wall Cabinets Brownstone defines a 27 inch wide, 12 inch deep, 42 inch high Dartmouth wall cabinet from Wolf Home Products built for standard wall runs. Two butt doors span the 27 inch width, so the opening suits wider wall spaces without a center stile interrupting access. Three adjustable shelves inside let you set storage heights around tall containers or stacked dinnerware in a straightforward way. Cabinet fronts are made from 3/4 inch solid maple wood, giving the face frame and doors a solid hardwood working surface that handles daily door use well. Rails are pocket drilled and assembled with 1 1/4 inch screws, creating a tight mechanical joint that keeps the frame square during hanging and loading. Side panels and bottom use 1/2 inch plywood with matching exterior laminate, so the cabinet body combines wood core strength with a finished exterior face that visually matches the Brownstone line.
The Dartmouth 27 inch by 12 inch by 42 inch wall cabinet uses 1/2 inch plywood side panels and bottom glued and stapled into a 1/2 inch dado in the cabinet front frame, so the box aligns naturally as you position it on the wall. Back panels made from vinyl-covered 1/2 inch plywood are glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom, creating a continuous back surface and hang rail connection that works with typical wall fastening patterns. Rails that are pocket drilled and assembled with 1 1/4 inch screws keep the frame tight during handling and lifting into place. All-wood 3/4 inch corner blocks installed on all corners tie the assembly together, which helps the cabinet maintain its shape when clamped or ganged with adjacent units along a wall run.
This Classic Series Brownstone Dartmouth wall cabinet with 27 inch width, 12 inch depth, and 42 inch height suits upper cabinet layouts that call for full-height wall storage over counters or work areas. Two butt doors cover the front opening, so the cabinet fits best where you want an unobstructed interior rather than divided compartments. The three adjustable shelves of 3/4 inch plywood with bull-nosed, foil-covered front edges provide multiple storage levels that can be raised or lowered around tall containers in kitchen or utility wall runs. The shelves are held in place with self-locking 1/4 inch diameter clips on the sides, so shelf position can be changed without tools while still holding the load at the chosen height. A toekick 4 1/2 inch high by 4 1/16 inch deep applies to standard cabinets in this line, which helps align base units in the same series under these wall cabinets for a consistent elevation reference.
Cabinet fronts made from 3/4 inch solid maple wood give a stable hardwood structure at the face, which matters where hinges and door hardware are mounted and operated frequently. Rails that are pocket drilled and assembled with 1 1/4 inch screws create strong joints at the frame, helping the doors stay aligned once adjusted. Side panels and bottom in 1/2 inch plywood with matching exterior laminate are glued and stapled into a 1/2 inch dado in the cabinet front frame, so the front and box act together under load, which supports consistent reveals between adjacent wall units. Back panels made from vinyl-covered 1/2 inch plywood, glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom, provide a stable surface for fastening across studs while keeping the inside surface finished. All-wood 3/4 inch corner blocks in all corners add bearing area where sides, bottom, and frame meet, which supports the cabinet body when the 42 inch height is filled with stored items. Half-depth adjustable shelves of 3/4 inch plywood with bull-nosed, foil-covered front edges balance access and storage by leaving open space at the back for lighting runs or shallow items while still supporting everyday dishes at the front edge.
The Wolf 3036512 cabinet measures 27 inches wide, 12 inches deep, and 42 inches high, which defines how it lines up with adjacent wall units and available vertical wall space.
The cabinet has three adjustable shelves, so interior spacing can be set to match the height of stored items while keeping multiple storage levels in a 42 inch tall wall unit.
The Dartmouth cabinet fronts are made from 3/4 inch solid maple wood, giving a hardwood face that supports hardware fastening and repeated door use at wall cabinet height.
The rails are pocket drilled and assembled with 1 1/4 inch screws, forming secure joints that help keep the front frame square during installation and everyday opening and closing.
The side panels and bottom are 1/2 inch plywood with matching exterior laminate, glued and stapled in a 1/2 inch dado in the front frame, creating a unified, aligned box structure.
The half-depth 3/4 inch plywood shelves are held by self-locking 1/4 inch diameter clips on the sides, allowing straightforward height changes while keeping shelves firmly seated in use.
The Classic Series Wall Cabinets Brownstone Dartmouth 27 inch by 12 inch by 42 inch unit from The Wolf Organization, LLC pairs two butt doors with three adjustable shelves and all-wood corner block construction, giving wall storage that aligns with other Wolf Home Products pieces. Solid maple 3/4 inch cabinet fronts, 1/2 inch plywood box panels, and a vinyl-covered 1/2 inch plywood back joined in dadoed, glued, stapled construction create a wall cabinet built for everyday upper cabinet runs. Select this Wolf 3036512 cabinet when a 27 inch wide, full-height wall piece is needed to extend a Brownstone Dartmouth layout across a kitchen or workspace wall.
Sold In: 1 Each