Classic Series Wall Cabinets Brownstone Dartmouth identifies this Wolf 3036509 unit as a 36 inch wide, 12 inch deep, 42 inch high wall cabinet, so it sets upper storage at a practical working height while matching common kitchen layout dimensions. The two butt doors provide a centered access opening, which helps when aligning this cabinet over appliances or work areas. Three adjustable shelves inside allow spacing to be set around actual contents, so tall containers and shorter items can share the same cabinet without wasted height. Cabinet fronts are made from 3/4 inch solid maple wood, giving the door and frame a solid hardwood face where it is handled and seen most. This construction ties directly into hinge mounting and daily door use, supporting long-term function at the front of the box.
This Wolf Classic Series wall cabinet is 36 inches wide, which aligns with common stud spacing and standard appliance widths, helping the installer position fasteners through the reinforced back. The 12 inch depth keeps the cabinet within typical wall cabinet projection, maintaining clearance over counters and work surfaces. At 42 inches high, the cabinet offers extended vertical storage while matching taller wall runs in many layouts. Side panels and bottom are 1/2 inch plywood set in a 1/2 inch dado, so the load path carries from the front frame into the box as the unit is hung and used. The back panel, made from vinyl-covered 1/2 inch plywood and stapled to the hang rail and cabinet bottom, creates a continuous surface for wall attachment that works with the internal structure.
This Wolf Dartmouth wall cabinet 36 x 42 is sized for upper runs where extra height is needed without increasing depth beyond 12 inches, so it fits above counters while offering more shelf space. The 36 inch width lets it be used over base cabinets of the same width, giving a straight visual stack and continuous vertical line. Two butt doors across that width break the opening into manageable sections, which helps in tight kitchens where full-width single doors would swing too far into the room. The 42 inch height, combined with three adjustable shelves plus the cabinet bottom, creates multiple storage levels that can be tuned to typical kitchen items, keeping frequently used pieces near the lower portion of the cabinet.
The 3/4 inch solid maple cabinet fronts provide a dense, stable material for hinge mounting and door edge alignment, which supports consistent reveals across a run of cabinets. Rails that are pocket drilled and assembled with 1 1/4 inch screws create strong front frame joints, helping the doors stay aligned as the cabinet is loaded. Side panels and bottom set in a 1/2 inch dado and secured with glue and staples form a locked box around the frame, which helps limit twisting during transport and hanging. Vinyl-covered 1/2 inch plywood back panels on the inside create a smooth interior surface while also tying into the hang rail and cabinet bottom, so the back participates in carrying wall loads. All-wood 3/4 inch corner blocks at every corner add internal bracing, helping the cabinet remain square, which supports straight door swing and shelf alignment over time.
The Wolf Classic Series wall cabinet measures 36 inches wide, 12 inches deep, and 42 inches high, so it matches common upper cabinet sizing for extended-height wall runs.
The cabinet provides three adjustable shelves, allowing shelf spacing to be set around varying item heights while using the full 42 inch cabinet interior effectively.
The cabinet fronts are made from 3/4 inch solid maple wood, giving a hardwood face that supports hinge mounting and stands up to regular door handling.
The rails are pocket drilled and assembled with 1 1/4 inch screws, creating mechanically fastened joints that help the face frame stay tight under daily use.
Side panels and bottom are 1/2 inch plywood with matching exterior laminate, glued and stapled in a 1/2 inch dado in the front frame to form a rigid box.
The back is vinyl-covered 1/2 inch plywood on the inside, glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom for structural support.
This Wolf 3036509 Classic Series wall cabinet combines a 36 inch width, 12 inch depth, and 42 inch height with 3/4 inch solid maple fronts and plywood box construction, giving a defined upper-cabinet option for Brownstone Dartmouth runs. With two butt doors, three adjustable shelves, dadoed plywood panels, and all-wood corner blocks, it provides a structural layout that supports everyday wall storage. Select this cabinet when a tall upper unit in the Dartmouth Brownstone style is needed to align with similar Wolf Home Products installations.
Sold In: 1 Each