Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Classic Series Wall Cabinets Brownstone defines this Wolf Dartmouth 30 inch wide, 12 inch deep, 42 inch high wall cabinet, so installers get a known size for laying out upper runs and aligning with adjacent cabinets on the wall line. The cabinet has two butt doors, which creates a wide, clear opening that simplifies loading taller items and reduces reach obstruction inside the cabinet. Three adjustable shelves are provided, so the interior can be set to different heights to match stored contents and optimize vertical space. Cabinet fronts are made from 3/4 inch solid maple wood, giving a sturdy face frame and doors that hold hinges and fasteners securely during installation and in long-term use. Rails are pocket drilled and assembled with 1 1/4 inch screws, creating a mechanically locked frame that resists racking when the cabinet is hung and loaded. Side panels and the bottom use 1/2 inch plywood with matching exterior laminate, providing a stable box structure with a coordinated exterior surface for a consistent wall run appearance.
The Wolf 3036511 wall cabinet measures 30 inches wide, 12 inches deep, and 42 inches high, which helps plan stud locations, fastener points, and clearances above counters or fixtures. The cabinet back panels are stapled to the hang rail and cabinet bottom, creating a reinforced rear zone that supports secure fastening to the wall structure. A toekick of 4 1/2 inches high by 4 1/16 inches deep is specified on standard cabinets in this series, which aligns base units in the same line when coordinating an upper and lower layout. The shelves are held in place with self-locking 1/4 inch diameter clips on the sides, giving stable support that resists accidental dislodging during everyday loading and adjustment. The overall plywood box construction provides predictable screw-holding in the sides and back, which matters when tying cabinets together through their frames and ganging multiple units along a run.
This Classic Series Wall Cabinets Brownstone Dartmouth unit, at 30 inches wide, 12 inches deep, and 42 inches high, fits typical upper cabinet layouts where extra height is needed, such as reaching closer to the ceiling line while maintaining standard counter depth clearance. The two butt doors span the 30 inch width, suiting installations over work areas where a wide opening simplifies loading bulkier items without a center stile. Three adjustable shelves allow the interior volume to be divided for dishware, dry goods, or supplies while using the full 42 inch height, which is useful in kitchens, laundry spaces, or utility areas organized around wall storage. The half-depth adjustable shelf design lets items on lower levels stay visible and reachable toward the front, which helps when the cabinet is installed higher on the wall and users need a clearer sightline to stored contents. Side and bottom panels in 1/2 inch plywood with matching exterior laminate support use in visible wall runs, where the cabinet sides may remain exposed at ends or transitions yet still match the rest of the series.
Cabinet fronts built from 3/4 inch solid maple wood create a strong face frame and door structure that holds hinges and alignment across the 30 inch span, which supports smooth door operation over time. Rails that are pocket drilled and assembled with 1 1/4 inch screws provide rigid joints, so the frame stays square when cabinets are clamped together and when fasteners draw the unit tight to the wall. The 1/2 inch plywood side, bottom, and back panels are all glued, stapled, or nailed into 1/2 inch dados in the front frame or structure, producing a mechanically interlocked box that resists racking as the cabinet is lifted, positioned, and loaded with contents. All-wood 3/4 inch corner blocks at every corner further knit the cabinet together, helping the top and bottom stay flat so doors align properly and reveal lines remain even. The vinyl-covered interior surface on the 1/2 inch plywood back panels offers a practical interior finish that supports routine wiping while still anchoring securely to the hang rail and cabinet bottom. Self-locking 1/4 inch diameter shelf clips keep the 3/4 inch plywood shelves settled into their chosen positions, which helps prevent shelf tilt or movement when items are slid or stacked during regular use.
The Classic Series Wall Cabinets Brownstone Dartmouth cabinet is 30 inches wide, 12 inches deep, and 42 inches high, so it matches common upper cabinet planning dimensions for wall layouts.
The cabinet uses two butt doors and three adjustable shelves, providing a wide opening with multiple storage levels that can be set to suit different contents.
The cabinet fronts are made from 3/4 inch solid maple wood, giving the face frame and doors a sturdy structure for hinges and long-term door use.
Side and bottom panels are 1/2 inch plywood in 1/2 inch dados, with glued and stapled joints, and 3/4 inch wood corner blocks in all corners, forming a rigid wall cabinet box.
The 3/4 inch plywood shelves are held by self-locking 1/4 inch diameter clips on the sides, so shelf positions stay secure during loading and everyday use.
The rails are pocket drilled and assembled with 1 1/4 inch screws, creating tight joints that help the face frame remain square during installation and service.
The Wolf Dartmouth Classic Series Wall Cabinets Brownstone unit, at 30 inches wide by 12 inches deep by 42 inches high, combines 3/4 inch solid maple fronts with a 1/2 inch plywood box to support everyday wall storage. Two butt doors, three adjustable shelves, and a vinyl-covered 1/2 inch plywood back work together to make interior space usable while maintaining a rigid structure for wall mounting. When a wall layout calls for this specific size and construction, this Wolf 3036511 wall cabinet offers a coordinated option for building consistent upper runs.
Sold In: 1 Each