Classic Series wall cabinets Brownstone Dartmouth describes a Wolf 3036515 wall cabinet designed as a 18 inch wide, 12 inch deep, 42 inch high storage unit, which provides tall wall storage while keeping a slim profile over work areas or counters. The single door layout concentrates access on one hinged opening, which simplifies door alignment and gives a clear opening span for stacking stored items. Three adjustable shelves create four usable levels inside, so installers can set shelf positions around everyday items for better vertical space use. Cabinet fronts made from 3/4 inch solid maple wood give a solid face frame and door surface, which supports hinge mounting and finishing consistency across a run of cabinets. Side panels and the bottom built from 1/2 inch plywood with matching exterior laminate form the main box, so the case supports mounted loads while visually matching the Brownstone Dartmouth look. A toekick sized 4-1/2 inches high by 4-1/16 inches deep on standard cabinets sets a known base profile that aligns visually when this wall cabinet is coordinated with related base units in the same line.
Rails that are pocket drilled and assembled with 11 1/4 inch screws form the front frame connections, which ties the frame together mechanically so it resists racking forces when the door is used or when the cabinet is lifted during installation. Side panels and the bottom are glued and stapled into a 1/2 inch dado in the cabinet front frame, so each panel nests into a machined groove that helps keep alignment during assembly and supports uniform squareness. Back panels made from vinyl-covered 1/2 inch plywood on the inside are glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom, creating a braced rear plane that helps the cabinet hold shape as it is fastened to wall framing. The hang rail connection to the back panel with staples gives the rear structure a defined fastening path, which matters when positioning fasteners along studs or blocking.
The 18 inch wide by 42 inch high format suits wall runs where a tall unit is needed without taking excessive horizontal space, so installers can bridge gaps between larger cabinets or fill narrow wall sections. The 12 inch depth matches typical wall cabinet standards, which helps this Dartmouth Brownstone unit line up with other Wolf Home Products wall cabinets in a continuous row. A single door spanning the full height provides one clear access area, which is helpful above counters or workspaces where a centered opening is preferred. The half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges offers a rigid storage surface, which supports common kitchen or shop items while presenting a finished leading edge that is comfortable to handle. Self-locking 1/4 inch diameter clips hold the shelves on the sides, which secures shelf position during loading so the shelf stays seated as items are moved in and out.
Cabinet fronts made from 3/4 inch solid maple wood provide a stable platform for hinges and door alignment, which helps installers set consistent reveals across multiple Brownstone Dartmouth fronts along a wall. All-wood 3/4 inch corner blocks at every corner tie the sides, top, and bottom together, which reinforces the box against twisting when it is lifted into place and fastened. Side panels and the bottom built from 1/2 inch plywood with matching exterior laminate, glued and stapled in a 1/2 inch dado, create intersecting glued joints, which support long-term squareness so doors continue to close evenly. Back panels made from vinyl-covered 1/2 inch plywood inside, glued and nailed into a 1/2 inch dado and stapled to the hang rail and cabinet bottom, form a multi-point rear connection that spreads mounting stresses across the case. The toekick dimension of 4-1/2 inches high by 4-1/16 inches deep on standard cabinets sets a base profile reference, which assists with visual alignment when coordinating this wall cabinet with standard base cabinets from the same Classic Series Brownstone Dartmouth line in the same room.
The Classic Series wall cabinet Dartmouth Brownstone 3036515 measures 18 inches wide by 12 inches deep by 42 inches high, which fits typical wall cabinet layouts needing a tall, narrow unit.
The Wolf Dartmouth Brownstone wall cabinet has three adjustable shelves, which create multiple storage levels so users can set heights around dishes, containers, or supplies.
The cabinet fronts are made from 3/4 inch solid maple wood, which provides a sturdy surface for hinge mounting and frequent door use in kitchen or workspace settings.
The side panels and bottom are 1/2 inch plywood with matching exterior laminate, glued and stapled into a 1/2 inch dado, which supports a square, stable cabinet box.
The shelves are held by self-locking 1/4 inch diameter clips on the sides, which secure shelf positions under typical loading and handling during everyday use.
The back panel is vinyl-covered 1/2 inch plywood inside, glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom, which braces the case for mounting.
The Wolf Dartmouth Brownstone 18 inch by 12 inch by 42 inch wall cabinet combines a single door layout, three adjustable shelves, and a 3/4 inch solid maple front, giving installers a defined, matching unit for tall wall storage. The 1/2 inch plywood case with matching exterior laminate, 3/4 inch corner blocks, and vinyl-covered 1/2 inch plywood back panel create a reinforced box that supports mounting as part of a larger Classic Series Brownstone Dartmouth installation. The defined toekick dimensions on standard cabinets help this wall unit visually coordinate with base cabinets from the same Wolf Home Products line, supporting a continuous look across the project.
Sold In: 1 Each