Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune 5302 Series is a 12 inch full-extension side-mount ball bearing drawer slide rated 255 lb per pair, built from 304 stainless steel and finished in zinc. It is designed for demanding shop, commercial, and heavy-storage applications where load capacity and reliable travel matter more than concealed hardware.
At 255 lb per pair, the 5302 Series covers a wide range of heavy drawers that a standard 100 lb cabinet slide cannot safely handle: loaded tool drawers in a shop, heavy-duty storage in a professional kitchen prep area, server or equipment pull-outs in a commercial build-out, or any utility drawer that gets used hard and loaded fully. Full extension means the back of the drawer comes all the way out to the face of the cabinet, so nothing stays buried at the rear. For shops and commercial cabinets where access to every inch of drawer depth is part of the working routine, full extension at this load class is the right combination.
The slide is made from 304 stainless steel, which carries the structural load and resists surface corrosion in dry indoor conditions. The zinc finish over the stainless provides an additional layer of protection and gives the slide a clean, uniform appearance. Zinc is a functional finish — it holds up through regular contact and cleaning — but this slide is rated for indoor use. It is not a marine or washdown-rated product, and the zinc coating is not a substitute for a full stainless or passivated finish in wet environments.
Cabinet shops building commercial casework, heavy-duty shop furniture, or utility storage for trade environments will find the 5302's 255 lb capacity useful where standard slides would be undersized. The 12 inch length suits shallower drawers — think a wide, low tool tray or a shallow utility cabinet rather than a full kitchen base cabinet. The non-handed format means one SKU covers both sides of every drawer, which simplifies inventory for shops running multiple units. Designers specifying commercial-grade or high-load residential storage can count on the 5302's capacity without stepping up to a specialty industrial slide.
No — 12 inches is the closed length of the slide. Because this is a full-extension slide, the drawer member travels approximately the full slide length, bringing the entire drawer out to the cabinet face. Slide length and drawer travel are separate specs.
The standard side clearance for this segment is 1/2 inch per side. Build the drawer box 1 inch narrower than the cabinet opening to leave the correct gap for each slide. Confirm the exact clearance requirement in the Sugatsune 5302 Series installation documentation before building your box.
No. The 5302 Series is a standard-motion slide — the drawer stays wherever it is left. There is no damper, spring, or detent. If a closing feature is needed, a different slide in the appropriate load class should be specified.
Side-mount ball bearing slides can be used in face-frame cabinets, but the rear of the slide needs support — typically a series-matched rear mounting bracket. Confirm which rear bracket is compatible with the Sugatsune 5302 Series before ordering for a face-frame application.
Confirm the sold-as unit before ordering. Most slides in this segment sell as a pair; verify the pack quantity on the product listing to ensure you receive what is needed per drawer.
The Sugatsune 5302 Series delivers full-extension travel and a 255 lb load rating in a straightforward side-mount format — the right combination when the drawer needs to carry real weight and open completely.