Sugatsune 5302 drawer slides provide a 13-3/4 inch full extension stroke, so the drawer can travel its entire length and expose stored contents for direct access during cabinet, fixture, or storage use. The slides are a side mount drawer slide design, which positions the members along the cabinet sides to support the drawer and maintain alignment along the run. A ball bearing slide construction supports the moving members on rolling elements, which reduces friction and helps the drawer move with a consistent feel throughout its extension. The slides are made of 304 stainless steel, so the load-bearing members are formed from a stainless alloy that is suited to applications where standard steel slides might be exposed to moisture during normal cabinet operation. The product is identified as Sugatsune 5302 Series and uses manufacturer part number 5302-350, which ties this slide to job specifications and ordering systems that call out this exact series and size.
This slide is a side mount drawer slide, so the cabinet member locates along the cabinet side while the drawer member attaches directly to the drawer box side wall. The slide is mounted with M5 flat head screws, so the countersunk holes in the members are formed for the head geometry of M5 flat head fasteners, helping the screw heads sit flush along the slide surface during installation. The 13-3/4 inch length ties the slide size to drawers designed around that nominal depth, which helps align cabinet box depth and drawer length so the full extension feature operates along the intended travel. The 304 stainless steel construction supports use where the slide may experience routine splashes or humid environments during operation, which matters in installations where standard carbon steel components are less desirable.
The 5302-350 stainless drawer slide is part of the Sugatsune 5302 Series, which frames it as a defined option for cabinet and casework projects that call for a 13-3/4 inch full extension member. The slide is a side mount design, so it fits projects where drawer boxes are built with clearance between the box sides and cabinet opening for side-mounted hardware. The unhanded stainless steel slide configuration supports using the same slide reference on either cabinet side, which streamlines planning when setting up multiple drawer positions in banks or runs. The stainless steel material is 304 stainless steel, which positions this slide for use where the hardware may be installed in cabinets that experience moisture exposure as part of regular service. By combining full extension, ball bearing operation, and a defined 13-3/4 inch length, this slide fits applications where installers want a predictable travel length that matches drawer depth for access to stored items along the entire drawer.
The full extension ball bearing slide construction means the moving members extend until the drawer reaches its full 13-3/4 inch stroke, supporting repeatable access each time the user opens the drawer. Because it is a side mount drawer slide, the cabinet and drawer members align in a way that supports consistent reveal and side clearance when installers keep to a standard drawer box sizing approach. Mounting with M5 flat head screw hardware gives a defined fastening specification that aids repeatability during production work, since every slide uses the same M5 flat head interface. The unhanded slide design allows one 5302-350 model to be used on both left and right sides, which simplifies layout and reduces potential mismatches during assembly. The 304 stainless steel members support slides that will operate in environments where moisture is common during everyday use, which contributes to predictable performance in those cabinet settings over time.
The Sugatsune 5302-350 is a side mount drawer slide with full extension ball bearing construction, which supports smooth travel and access to the complete 13-3/4 inch drawer length.
The 5302-350 slide is made of 304 stainless steel, which suits cabinet and storage applications where the slide may encounter moisture during regular service.
The Sugatsune 5302-350 drawer slide has a 13-3/4 inch length, which ties it to drawers designed around that nominal depth for full extension travel.
The 5302-350 slide is mounted using M5 flat head screws on the side of the cabinet and drawer, supporting a consistent side mount installation layout.
The 5302-350 slide uses an unhanded design, so the same slide pattern can be mounted on either the left or right side of the drawer.
The 5302-350 part number identifies this specific Sugatsune 5302 Series 13-3/4 inch full extension stainless steel side mount drawer slide configuration.
The 5302-350 stainless steel side mount drawer slide combines Sugatsune 5302 Series identification, 13-3/4 inch full extension travel, and ball bearing construction to support smooth drawer movement. The 304 stainless steel members and unhanded design help align this slide with cabinet, casework, and storage projects that value consistent mounting details, defined M5 flat head screw fastening, and predictable full extension performance across drawers built around this length.