Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune 5302 Series is a 27-9/16 inch full-extension side-mount ball bearing drawer slide rated 155 lb per pair, built from steel and finished in zinc for reliable indoor service. At this length and load class, it covers a wide range of demanding drawer applications where complete rear access and genuine capacity matter.
Standard 22 or 24 inch slides serve most kitchen drawers, but deeper cabinets — workbench bases, tool storage, server consoles, and institutional casework — need a longer slide to properly support the drawer box from front to back. At 27-9/16 inches, this slide fills that gap without requiring a custom or special-order solution. The 155 lb per-pair rating means it is also the right choice when the drawer carries real weight: dense hardware stock, heavy binders, equipment, or bulk supplies. Reaching the back of a deep, loaded drawer is exactly what full extension is designed for — the intermediate member carries the drawer member out past the cabinet face so the rear contents are fully accessible, not just partially visible.
Zinc plating over steel is the working standard for side-mount ball bearing slides used indoors. It provides corrosion resistance appropriate for climate-controlled shops, offices, utility rooms, and commercial interiors. This is not a decorative finish and not stainless steel — it is a functional protective coating on steel members that will be mounted inside a cabinet and largely out of sight during normal use. The ball bearings run in formed steel raceways the full length of the slide, so the load is distributed evenly and the action stays smooth as the drawer cycles over time.
This slide fits naturally into the workflow of cabinet shops, commercial millwork operations, and contractors who regularly build or install deeper-than-standard casework. The non-handed format simplifies high-volume installs — pull two slides from the box and mount them without checking orientation. Homeowners and designers working on a utility room, mudroom built-in, or workshop storage project will find this length hits the sweet spot for cabinets in the 27 to 30 inch depth range. Face-frame cabinet installations require rear mounting support at the back of the slide; add the appropriate rear brackets for your cabinet construction, as they are sold separately and are series-specific.
No. Zinc is an electroplated finish over steel — it protects against corrosion in dry indoor environments but is not stainless steel. The SAP description references 304SS, but the product attributes confirm the finish is zinc-plated steel. For wet, washdown, or food-service environments, a confirmed stainless steel slide is the appropriate choice.
No — that is the closed length of the slide. Because this is a full-extension model, the drawer member travels approximately the full slide length, so the whole drawer clears the cabinet opening. Slide length and drawer travel are two separate facts; full extension means the travel closely matches the slide length.
No. The 5302 Series is non-handed, so both slides in a pair are identical. Order the quantity you need based on your drawer count — two slides per drawer.
Side-mount slides need rear support in face-frame cabinets because the cabinet side is set back from the face frame. Add the appropriate rear mounting brackets for this series — they are sold separately. In frameless cabinets the slide mounts directly to the panel side.
Per pair. The 155 lb rating covers a working set of two slides, one on each side of the drawer — it is not doubled by counting each slide individually.
When the cabinet is deeper than standard and the drawer carries more than a standard slide is rated for, the Sugatsune 5302 Series in 27-9/16 inches addresses both requirements in a non-handed, zinc-finished format that installs without complexity and lasts through years of indoor service.