Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune 5302 Series is a 19-11/16 inch full-extension side-mount ball bearing drawer slide rated 201 lb per pair, finished in zinc for dependable indoor service. It is built for cabinet shops, contractors, and facility managers who need substantial load capacity in a standard side-mount format without paying for a specialty finish.
At 201 lb per pair, this slide handles work that a standard 75–100 lb cabinet slide cannot. Think loaded tool drawers in a millwork shop, heavy archive drawers in a commercial office build, or utility storage drawers carrying dense hardware stock. Full extension means the back of a nearly 20-inch-deep drawer comes all the way out — no digging for the part at the rear. The zinc finish slots into most interior cabinet environments without requiring a premium stainless or anodized specification, which keeps the job's hardware cost in check while still delivering the capacity.
The slide members are steel, finished in zinc plating. Zinc is the workhorse finish of this product class: it resists the everyday corrosion of an indoor shop or commercial cabinet environment and holds up through years of cycling. This is not a decorative finish and it is not stainless steel — it is a functional, industrial coating appropriate for dry interior applications. If the installation environment involves moisture, washdowns, or food contact, a stainless-finished version of the 5302 series is available elsewhere in this line.
This slide fits cabinet shops running production on heavy storage drawers, contractors specifying commercial millwork with real load demands, and any installer who has outgrown the standard 100 lb side-mount class. The non-handed format cuts handling time on large orders — one SKU covers both sides of every drawer. At 19-11/16 inches of nominal length, it suits drawer boxes built for a standard 20-inch cabinet depth. Pair it with the appropriate rear mounting brackets when installing in face-frame cabinets, as those are sold separately and are series-specific.
No — 19-11/16 inches is the closed slide length. Because this is a full-extension slide, the drawer travels approximately its full nominal length, bringing the entire box out past the cabinet face. Slide length and drawer travel are two separate specs.
Per pair. That is the working load for two slides carrying one drawer — do not double it by counting each slide individually.
No. The 5302 Series in this configuration is a standard-motion slide — no damper, no spring, no detent. The drawer stays wherever it is left. If soft-close or a closing feature is required, look for the appropriate motion variant in the 5302 family.
No. The design is non-handed, so both slides in the pair are the same part. Order the quantity that matches your drawer count.
Side-mount ball bearing slides in this class typically require 1/2 inch of clearance per side. Confirm the exact tolerance for the 5302 Series against Sugatsune's published specifications before sizing your drawer boxes.
When the job calls for 201 lb of load capacity and a zinc finish is the right call for the environment, the Sugatsune 5302 Series delivers full-extension, non-handed performance without overspecifying the finish — keeping the hardware budget where it belongs.