Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune 5302 Series drawer slide is a full-extension, side-mount ball bearing slide in a zinc finish, rated 211 lb per pair and built from 304 stainless steel. At 17-11/16 inches in nominal length, it handles the load demands of shop benches, institutional cabinets, and utility drawers where a standard 100 lb slide would be undersized.
A 211 lb rating per pair puts the 5302 Series in a different class than the kitchen cabinet slides that dominate most hardware catalogs. That capacity covers a heavy tool drawer, a production shop's material-sample pull-out, or an institutional cabinet stocked with dense supplies. Full extension means the back of the drawer clears the cabinet face completely — nothing is buried behind a partially open front. If the drawer needs to be emptied or serviced from the front, full extension is the spec that makes it possible.
The 5302 Series is formed from 304 stainless steel, a base material that resists corrosion well beyond the performance of ordinary cold-rolled steel. The zinc finish over that base adds a conventional protective layer suited to dry, indoor environments. Zinc is a functional, low-profile finish — it protects the steel members during service without adding decorative character. These slides sit beside the drawer box when the drawer is open, so the finish is secondary to the material quality underneath it.
Cabinet shops and contractors specifying furniture for commercial kitchens, laboratories, or medical environments often reach for stainless steel drawer hardware when the substrate material demands it. The 5302 in zinc finish suits those applications where the underlying 304 SS construction is the specification driver and a standard decorative finish is acceptable. Shop owners outfitting a bench with heavy pull-outs, and institutional specifiers building storage for dense equipment, will also find the 211 lb rating in this 18 inch length directly applicable. The non-handed design simplifies ordering: one line item covers both sides of every drawer.
The slide's nominal length is 17-11/16 inches — the product name and SAP description both state this metric dimension. The attribute field rounds to 18 inches for search and filtering purposes. Measure your cabinet's interior depth against the 17-11/16 inch closed length when planning the drawer box.
No. Zinc is an indoor finish. The 304 stainless steel body provides strong corrosion resistance, but this slide is rated for dry indoor use. For washdown or outdoor applications, specify a slide with an appropriate corrosion-resistant finish to match the environment.
Slide length and drawer travel are separate measurements. A full-extension slide brings the drawer out approximately the length of the slide, clearing the cabinet opening entirely — but travel is a function of the slide's design, not simply its closed length. Confirm travel against the published specification for this series if your application requires a precise number.
Side-mount slides installed in face-frame cabinets need rear support because the cabinet side is set back from the front frame. Series-specific rear mounting brackets are required for face-frame work and are sold separately. This slide mounts directly to the cabinet side in a frameless (Euro-style) cabinet without additional hardware.
Per pair — that is the standard convention for drawer slide load ratings. Both slides in the set share the load.
When the load is real and the drawer needs to come all the way out, the Sugatsune 5302 Series in zinc finish gives you the capacity, the construction, and the full-extension travel to do the job cleanly.