Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune inset pocket door kit turns a hinged cabinet opening into a clean, retracting pocket door using a coordinated slide and hinge system, so doors clear the opening for easier access to multimedia or workspace components. This pocket door hardware kit is designed as an inset pocket door system, so the door sits flush within the cabinet face when closed, supporting clean front lines on built-ins and furniture-grade cabinets. The system uses four slides to guide the door travel, helping keep the motion controlled from open to fully retracted inside the cabinet. A synchronized board ties the motion of the slides together, which helps the door track square as it moves and reduces the tendency for racking on taller doors. This kit is part of the ST15 L-type family, supporting an inset layout that many installers prefer for entertainment and storage applications.
The inset pocket door system is specified for minimum cabinet depth of 19-1/2 inches, giving installers a clear depth requirement when planning casework for retracting doors around equipment or storage. Door height coverage from 35-7/16 inches to 47-1/4 inches defines the working range of this pocket door hardware kit, so openings in that band can use the same layout and components. The system uses 5-speed adjustable soft-closing dampers, which temper the final closing movement and allow tuning of the door behavior to the cabinet size and door weight range. The door fittings allow the door to retract further into the cabinet than the ALTST20-D360 series, increasing clearance at the front of the cabinet and helping doors sit deeper within the pocket during use.
This pocket door hardware kit is categorized under shelf, closet and garage organization, as well as multimedia and workspace components, so it suits cabinets built around equipment or storage that needs full front access. The inset pocket door system uses three hinges and three hinge mounting plates to position the door on the cabinet, so doors open conventionally at first before transitioning onto the four slides that draw them back inside. Minimum cabinet depth of 19-1/2 inches and door height range from 35-7/16 inches to 47-1/4 inches frame where this inset pocket door system fits best in casework design. Fittings that let the door retract further into the cabinet than the ALTST20-D360 series help when deeper retraction around multimedia components, workspace tools, or closet organization is desired.
The four slides combined with the synchronized board create a guided travel path that helps installers get consistent movement from unit to unit, reducing adjustments tied to uneven slide engagement. Three hinges and three hinge mounting plates provide defined mounting points for the inset pocket door system, so reveal and gap targets at the cabinet face can be repeated across a bank of cabinets. The 5-speed adjustable soft-closing dampers give control over how the door settles at the end of travel, which supports quieter operation around multimedia or workspace installations where frequent opening and closing occur. The further door retraction compared with the ALTST20-D360 series lets doors sit deeper inside the case, which helps keep door edges clear of pull-outs, shelves, or equipment in shelf, closet, and garage organization applications.
The Sugatsune inset pocket door kit is specified for minimum cabinet depth of 19-1/2 inches and door heights from 35-7/16 inches to 47-1/4 inches, guiding cabinet and door sizing during project planning.
The 5-speed adjustable soft-closing dampers control the final closing motion, so the door settles more gently against the cabinet, which is useful around multimedia and workspace components.
The four slides in the pocket door hardware kit guide the door as it retracts into the cabinet, helping keep movement stable over the door height range and along the 19-1/2 inch depth.
The three hinges and three hinge mounting plates set consistent pivot and mounting points, so the inset door swings and retracts in a repeatable path within the specified height range.
This inset pocket door system uses fittings that allow the door to retract further into the cabinet than the ALTST20-D360 series, increasing front clearance when the door is open.
The ALT-ST15-D360L-19 part number identifies this specific Sugatsune ST15 L-type inset pocket door system, helping match hardware to cabinet plans and replacement needs.
This Sugatsune inset pocket door kit combines four slides, a synchronized board, three hinges, three hinge mounting plates, and 5-speed adjustable soft-closing dampers into a single pocket door hardware kit for inset layouts. Minimum cabinet depth of 19-1/2 inches and door height support from 35-7/16 inches to 47-1/4 inches give clear design targets for multimedia, workspace, and organization cabinetry that benefits from further door retraction than the ALTST20-D360 series. Using the ALT-ST15-D360L-19 system allows casework plans to account for how doors swing, retract, and settle, turning a standard opening into a controlled inset pocket door solution.
Sold In: 1 Kit
