Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune inset pocket door kit is a pocket door system designed for inset cabinet doors, so the door sits flush with the cabinet face when closed for a clean front. This pocket door hardware kit uses two slides to guide the door, which supports smooth travel in and out of the cabinet and helps keep the motion consistent over repeated use. The inset pocket door system works as part of pocket door hardware in multimedia or workspace cabinets where a retracting door keeps fronts clear while equipment is in use. The ALT-ST15-D360S-28 pocket door kit is part of Sugatsune pocket door hardware, giving installers a defined product identity that matches job specifications and submittals. This configuration aligns with pocket door slides inset projects where the door must disappear into the cabinet while maintaining an inset look at rest.
The inset pocket door system is designed to work in cabinets with a minimum cabinet depth of 28-9/16 inches, so cabinet cases must be built to at least that depth for the slides and door retraction path to function correctly. The specified door height range of 19-11/16 inches to 27-9/16 inches gives installers a defined vertical window for door sizing, which helps engineers and cabinetmakers set door dimensions with confidence during design. Fittings in this pocket door system allow the door to retract further into the cabinet than the ALTST20-D360 series, which provides deeper stowage of the door and helps keep the opening as clear as the cabinet construction allows. This deeper retraction is useful where equipment, workspace, or shelving near the opening benefits from the door being set farther back inside the cabinet during use.
This inset pocket door system is classified under multimedia and workspace components, so it aligns well with cabinets that store electronics, monitors, or work surfaces needing a retracting front. The minimum cabinet depth of 28-9/16 inches supports deeper casework commonly used for multimedia gear or workspace storage, letting the door travel fully into the cabinet without interfering with the back. The door height range from 19-11/16 inches to 27-9/16 inches targets medium-height doors, which suits upper cabinets or equipment bays where a single door panel needs to move cleanly out of the way. Because this is a pocket door kit from the pocket door hardware class, the system is intended for applications where a swing door would obstruct circulation or access, such as tight aisles, pass-through workstations, or cabinets positioned near other moving components.
The inset pocket door system uses 5-speed adjustable soft-closing dampers, which lets installers tune the closing motion and manage how the door decelerates at the end of travel for different door sizes or weights within the specified range. This adjustment supports controlled closing that can reduce noise and impact on the cabinet, which is valuable in multimedia or workspace environments where frequent operation occurs. Fittings that allow the door to retract further into the cabinet than the ALTST20-D360 series increase the clear opening when the door is stored, which can improve access to equipment, shelves, or work surfaces positioned inside. The presence of two slides works together with the soft-closing dampers, providing guided motion to keep the door tracking properly while the damper controls the final closing behavior, which supports repeatable performance across many open-and-close cycles.
The Sugatsune inset pocket door kit requires a minimum cabinet depth of 28-9/16 inches, which sets the case depth needed for the slides and full door retraction path.
The ALT-ST15-D360S-28 pocket door kit is specified for doors between 19-11/16 inches and 27-9/16 inches high, guiding designers toward door sizes that match the system.
The 5-speed adjustable soft-closing dampers let installers tune closing speed, so the door can decelerate smoothly and reduce impact on the cabinet at the end of travel.
This pocket door system specifies two slides to guide the door, which supports stable, balanced movement during extension and retraction within the cabinet depth.
This inset pocket door system uses fittings that allow the door to retract further into the cabinet than the ALTST20-D360 series, increasing the clear access opening.
The system is listed under multimedia and workspace pocket door hardware, fitting cabinets where doors need to retract for clear access to equipment or work areas.
The Sugatsune inset pocket door kit with ALT-ST15-D360S-28 part number combines two slides, 5-speed adjustable soft-closing dampers, and fittings designed for deeper retraction than the ALTST20-D360 series. With a minimum cabinet depth specification and a clear door height range, the system gives designers and installers defined parameters for cabinet sizing. For multimedia or workspace cabinet projects that call for inset doors to retract fully into the case, this inset pocket door system provides a clearly identified pocket door hardware option that aligns with those requirements.
