Sugatsune Inset Pocket Door Kit, Min. Cab. Depth 16-9/16", Door Height 47-1/4" - 63", 4-Slides, Further Door Retraction, - ALT-ST15-D360LL-16
Description
Inset Pocket Door System For Cabinet Projects
Inset pocket door system from Sugatsune America is a pocket door hardware solution designed for cabinet applications where the doors retract inside the case. This system uses 4 slides so the door movement is guided at multiple points, which supports smooth travel in and out of the cabinet opening. The door height range of 47-1/4 inches to 63 inches means it is suited to mid-size cabinet doors often found in multimedia or workspace cabinetry. The minimum cabinet depth of 16-9/16 inches defines the case size required so the retracted door has room to park fully inside. As a pocket door hardware assembly, it is intended for projects where doors need to clear the opening for full access while still closing flush.
Key Pocket Door Details That Support Cabinet Use
- The 4 slides in this inset pocket door system guide the door along a defined path, which helps the door stay aligned as it opens, closes, and retracts into the cabinet.
- The minimum cabinet depth of 16-9/16 inches sets a clear depth requirement, which helps plan cabinet cases so the door can retract inside without interfering with interior components.
- The door height range of 47-1/4 inches to 63 inches covers a specific span of tall doors, which helps match this Sugatsune pocket door kit to appropriate cabinet openings during design.
- The fittings allow the door to retract further into the cabinet than the ALTST20-D360 series, which provides more clearance at the front of the cabinet for access or adjacent components.
- The 5-speed adjustable soft-closing dampers control the closing motion, which supports a controlled close that reduces impact on the cabinet and hardware over repeated cycles.
Cabinet Depth And Slide Layout For Installation
This Sugatsune pocket door kit is specified for a minimum cabinet depth of 16-9/16 inches, which gives the installer a defined case dimension when laying out side panels and interior equipment. The 4 slides in the system create a multi-point slide layout that manages the door path as it transitions from closed to fully pocketed. The inset pocket door design keeps the door flush in the closed position, then moves it inside the cabinet space on the same slide set. The 5-speed adjustable soft-closing dampers work with the slide arrangement to slow the final closing travel, which supports a predictable motion profile when fine-tuning the door operation.
Pocket Door Kit Details For Cabinet Applications
Where This Pocket Door System Fits Best
This inset pocket door system is part of the pocket door slides category within pocket door hardware, so it targets cabinet builds where doors must move fully out of the opening. The specified door height range of 47-1/4 inches to 63 inches aligns with taller cabinet doors often used in multimedia and workspace components, making it relevant for those vertical openings. The minimum cabinet depth of 16-9/16 inches means it is oriented toward deeper cases, such as multimedia cabinets that house equipment behind the door. Fittings that allow further door retraction than the ALTST20-D360 series help the door clear the cabinet face, which supports layouts where full-width access to the interior is useful. As a Sugatsune America solution, this pocket door system integrates hinges, hinge mounting plates, slides, a synchronized board, and a damper into a coordinated hardware approach for these cabinet scenarios.
Why These Pocket Door Details Support Repeatable Results
The 4-slide configuration in this cabinet pocket door system distributes the load across multiple slides, which helps maintain alignment as the door travels between closed and fully retracted positions. The synchronized board coordinates the slide motion, supporting consistent movement of the door panels each time the cabinet is used. The 5-speed adjustable soft-closing dampers let the user control the closing behavior, so the same hardware can be tuned to different cabinet weights or use patterns while keeping the final close controlled. Fittings that provide further door retraction than the ALTST20-D360 series shorten how much of the door projects into the opening, which supports predictable clearances at the front of the cabinet face. Hinges and hinge mounting plates defined for this kit work with the slide and damper set, helping the door pivot and slide on a matched geometry. The ALT-ST15-D360LL-16 manufacturer part number clearly identifies this exact configuration for replacement or duplication across multiple cabinets.
Common Questions About This Pocket Door System
What type of pocket door hardware is ALT-ST15-D360LL-16?
The ALT-ST15-D360LL-16 is an inset pocket door system from Sugatsune America, so it is designed for cabinet doors that close flush and retract inside the cabinet.
What cabinet depth is required for this inset pocket door system?
This pocket door system specifies a minimum cabinet depth of 16-9/16 inches, which defines the case depth needed for the door to retract into the cabinet space.
What door height range works with this Sugatsune pocket door kit?
This Sugatsune pocket door kit is specified for doors from 47-1/4 inches to 63 inches high, aligning with a defined set of taller cabinet openings.
How do the 5-speed adjustable soft-closing dampers affect use?
The 5-speed adjustable soft-closing dampers let the user control closing speed, which supports a smoother final close and reduces impact on the cabinet structure.
How does this system retract the door further than ALTST20-D360?
The fittings in this inset pocket door system are designed so the door retracts further into the cabinet than the ALTST20-D360 series, increasing front opening clearance.
What is the role of the synchronized board in this pocket door hardware?
The synchronized board coordinates the movement of the slides, which helps the door travel in a consistent, controlled path between closed and pocketed positions.
Selecting This Kit For Cabinet Pocket Doors
This inset pocket door system with 4 slides, synchronized board, hinges, hinge mounting plates, damper, and 5-speed adjustable soft-closing dampers gives a defined hardware set for inset cabinet pocket doors within the stated height and depth. The fittings that allow further door retraction than the ALTST20-D360 series provide additional clearance for cabinet openings where full access matters. For cabinet projects that match the 47-1/4 inch to 63 inch door height range and 16-9/16 inch minimum cabinet depth, this Sugatsune pocket door kit offers a coordinated way to design and replicate that pocket door function.