Sugatsune Inset Pocket Door Kit, Min. Cab. Depth 16-9/16", Door Height 27-9/16" - 35-7/16", 2-Slides, Further Door Retraction, - ALT-ST15-D360M-16

Inset Pocket Door System For Cabinet Fronts

Inset Pocket Door System describes this Sugatsune America ALT-ST15-D360M-16 kit, which is designed as pocket door hardware for cabinet applications. The system is an inset pocket door kit, so the door sits flush in the cabinet opening, giving projects a clean front while still allowing the door to slide back. The kit uses 2-slides, creating a guided track on both sides of the door for controlled movement that supports alignment during use. A synchronized board ties the motion together, so both slides travel in unison and the door tracks straight instead of twisting. Fittings in this kit allow the door to retract further into the cabinet than the ALTST20-D360 series, which opens up more access to the cabinet interior. This configuration serves as a pocket door solution where cabinet depth and front flush appearance both matter.

Key Pocket Door Details That Help Workflow

• The kit is specified for a minimum cabinet depth of 16-9/16 inches, which defines the cabinet carcass depth needed so the retracted door clears the opening and avoids binding during travel.
• The door height range of 27-9/16 inches to 35-7/16 inches sets the vertical sizing window, helping projects stay within dimensions that match the slide geometry for smoother motion over the full stroke.
• The 2-slides arrangement works with the synchronized board to manage lateral stability, helping the door stay square to the opening during repeated open-and-close cycles on a finished cabinet.
• The fittings that retract the door further than the ALTST20-D360 series create deeper stowage of the door, freeing additional front access to the cabinet interior when the door is fully pocketed.
• The pocket door hardware is part of Sugatsune America pocket door slides, tying it into a defined product class so it can be specified alongside other cabinet hardware in the same project.

Installation Dimensions And Door Motion Control

This inset pocket door kit is defined for cabinets with a minimum depth of 16-9/16 inches, so cabinet construction can be planned around the pocket requirement instead of guessing clearances. The door height window of 27-9/16 inches to 35-7/16 inches aligns the slide travel and the synchronized board with a specific panel size range, which helps the hardware operate within its designed leverage and loading geometry. The 2-slides configuration supports the door vertically and laterally, so the door tracks along both sides as it moves into and out of the cabinet opening. Fittings that retract the door further into the cabinet than the ALTST20-D360 series directly affect how much of the cabinet face is open when the door is stored, which matters when reaching into the cabinet or planning adjacent components.

Using This Sugatsune Pocket Door Kit On Projects

Where This Inset Pocket Door Kit Fits Best

This Sugatsune America pocket door kit belongs in the pocket door hardware class, making it suitable where cabinet fronts need an inset door that disappears into the casework. The specified minimum cabinet depth of 16-9/16 inches defines projects such as built-ins or multimedia cabinets that can provide that carcass depth. The system supports doors between 27-9/16 inches and 35-7/16 inches high, so it aligns with medium-height door applications, like upper or mid-height cabinet fronts, where that vertical size is typical. Because the fittings retract the door further into the cabinet than the ALTST20-D360 series, this kit suits layouts where additional front opening clearance is important, such as cabinets near equipment, shelving, or work surfaces that benefit from an unobstructed opening.

Details That Support Smooth, Repeatable Door Travel

The 2-slides design works with the synchronized board to coordinate both sides of the door as it moves, which helps keep the panel from racking and maintains a consistent reveal around the opening over repeated cycles. As part of an inset pocket door system, the hardware is configured so the door can sit flush in the opening when closed, then travel back into the cabinet along the slides, which supports a clean face while still providing full access when retracted. The fittings that allow further retraction than the ALTST20-D360 series change how far the door travels behind the front line of the cabinet, improving front clearance during use. Operating within the specified door height range of 27-9/16 inches to 35-7/16 inches keeps the motion in the geometry the manufacturer defined for this ALT-ST15-D360M-16 assembly.

Common Questions About ALT-ST15-D360M-16 Pocket Use

Select This Inset Pocket Door Kit For Defined Fit

The Sugatsune America ALT-ST15-D360M-16 inset pocket door kit provides a defined combination of 2-slides, synchronized board, and 5-speed adjustable soft-closing dampers for doors between 27-9/16 inches and 35-7/16 inches high in cabinets at least 16-9/16 inches deep. Fittings that retract the door further into the cabinet than the ALTST20-D360 series directly support projects where additional front opening clearance matters. For cabinet work that calls for pocket door hardware in this dimension range, this inset pocket door system offers a clearly specified option.