Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune inset pocket door kit is an inset pocket door system designed for cabinet doors that slide back into the case instead of swinging into the room, so doors clear the opening and work surfaces while staying accessible. This pocket door hardware uses four slides to support and guide the door, which spreads the load and helps the door track smoothly during opening and retraction. The system is built around 5-speed adjustable soft-closing dampers that control the closing action, helping doors settle into position in a controlled, repeatable way. Fittings in this system allow the door to retract further into the cabinet than the ALTST20-D360 series, opening up more working access in front of the cabinet. The kit is suited for doors between 35-7/16 inches and 47-1/4 inches high, so it covers a common range of cabinet door sizes in multimedia and workspace installations.
This inset pocket door system is designed for multimedia and workspace components, so it suits cabinets where equipment or work areas sit directly in front of the opening and benefit from fully retracted doors. The minimum cabinet depth of 16-9/16 inches defines the carcass geometry needed for mounting, which guides case construction before installation. The four-slide configuration gives multiple connection points between the door and cabinet, which supports stable movement when positioning the door for precise insets. The 5-speed adjustable soft-closing dampers provide a way to fine-tune the closing stroke after mounting, which helps installers dial in motion to align with surrounding fronts and protect door faces. The door height specification of 35-7/16 inches to 47-1/4 inches gives a clear mounting envelope for planning hinge placement and pocket travel.
This inset pocket door system is part of the multimedia and workspace components category, so it targets cabinets where doors need to disappear into the case to free the front area for monitors, equipment, or tools. The fittings that allow the door to retract further into the cabinet than the ALTST20-D360 series move the door deeper into the pocket, which helps keep handles and door edges away from controls or work surfaces. With a minimum cabinet depth of 16-9/16 inches, the system is suited to cases sized to house electronics or workspace materials while still providing the travel needed for full door retraction. The door height range of 35-7/16 inches to 47-1/4 inches aligns with many upper and tall cabinet formats in multimedia installations, so doors can be designed to match nearby fronts while still fitting the pocket system. As pocket door hardware in the broader shelf, closet, and garage organization class, it supports layouts that combine open access during use with a clean closed front when doors are brought back out of the pocket.
The 5-speed adjustable soft-closing dampers in this inset pocket door system let installers adjust the closing speed to match door height within the specified 35-7/16 inch to 47-1/4 inch range, which supports consistent motion across multiple cabinet doors. Because the door retracts further into the cabinet than the ALTST20-D360 series, the final door position leaves more clearance at the cabinet face, which can reduce interference when positioning devices or working close to the opening. The four-slide configuration spreads guidance along the door movement path, which aids in keeping the door aligned during repeated opening and closing cycles in a multimedia or workspace setting. As a Sugatsune inset pocket door kit with a defined minimum cabinet depth of 16-9/16 inches, it ties the motion control and retraction depth directly to case dimensions, helping projects achieve predictable, reproducible results when duplicating cabinet runs.
The inset pocket door system is listed under multimedia and workspace components, so it is oriented toward cabinets serving equipment, media, or work areas where doors retract out of the way.
The Sugatsune inset pocket door kit is specified for a minimum cabinet depth of 16-9/16 inches, setting the carcass depth needed to achieve the designed door travel and retraction.
The pocket door kit is designed for doors from 35-7/16 inches to 47-1/4 inches high, so doors sized within this range can be planned to work with the system.
The 5-speed adjustable soft-closing dampers let the inset pocket door system control closing speed, which supports smooth, controlled door closure suited to different door sizes within the specified range.
This inset pocket door system uses fittings that allow the door to retract further into the cabinet than the ALTST20-D360 series, providing increased clearance at the cabinet face during use.
The four slides in this pocket door hardware guide and support the door throughout its travel, helping keep motion stable and aligned in multimedia and workspace cabinet applications.
The Sugatsune inset pocket door kit ALT-ST15-D360L-16 combines an inset pocket door system, four-slide guidance, and 5-speed adjustable soft-closing dampers to support controlled retraction in multimedia and workspace cabinets. With a specified minimum cabinet depth of 16-9/16 inches and a door height range of 35-7/16 inches to 47-1/4 inches, the hardware provides clear parameters for planning cabinet carcasses and door sizes. For projects that benefit from doors retracting further into the cabinet than the ALTST20-D360 series, this pocket door hardware offers a defined solution ready to integrate into new cabinet runs or workspace layouts.
Sold In: 1 Kit
