Sugatsune Inset Pocket Door Kit, Min. Cab. Depth 28-9/16", Door Height 35-7/16" - 47-1/4", 4-Slides, Further Door Retraction, - ALT-ST15-D360L-28

Sugatsune Inset Pocket Door Kit For Cabinets

Sugatsune inset pocket door kit is an inset pocket door system designed for cabinets needing doors that slide back out of the way. The system specifies a minimum cabinet depth of 28-9/16 inches, so it suits deeper multimedia or workspace cabinets where doors must clear interior equipment. It supports door heights from 35-7/16 inches to 47-1/4 inches, covering a common range of tall cabinet fronts without custom hardware mixes. This pocket door hardware is built around the ALT-ST15-D360L-28 configuration, giving installers a defined part number to match on repeat projects. The kit uses 4 slides to guide the door movement, which helps keep the doors stable while traveling in and out of the cabinet opening. The product belongs to the pocket door slides class under shelf, closet and garage organization as well as multimedia and workspace components, so it fits projects where doors should disappear into the case after opening.

Key Pocket Door System Details For Projects

• The inset pocket door system layout supports doors that sit flush when closed, which allows clean cabinet faces in built-ins where protruding doors would interfere with surrounding panels or nearby equipment.
• 4 slides manage door travel, which distributes load across multiple tracks and helps the door move more controlled along its path during daily use.
• 5-speed adjustable soft-closing dampers control final closing speed, so installers can tune the action to match door size and cabinet application for smoother shutdown.
• Fittings allow the door to retract further into the cabinet than the ALTST20-D360 series, opening up the front of the cabinet more fully so users can work at the interior without the door edge crowding the access.
• The Sugatsune America brand and defined manufacturer part ALT-ST15-D360L-28 give shops a consistent reference for ordering the same pocket door solution on future jobs.

Installation Dimensions And Door Travel Behavior

The specified minimum cabinet depth of 28-9/16 inches sets the interior case dimension this inset pocket door system is built around, guiding cabinet construction or layout decisions when planning for doors that retract. The supported door height window of 35-7/16 inches to 47-1/4 inches defines where this particular setup fits best, which helps drafters and installers align door sizing with the hardware capability. The L-type configuration and 4-slide arrangement from the ALT-ST15-D360L-28 setup direct how the door travels into the cabinet cavity, influencing where interior components, shelves or electronics can sit without conflicting with the door path. Because the fittings allow further door retraction than the ALTST20-D360 series, more of the cabinet opening is available in front, which benefits workspaces and multimedia cabinets requiring unobstructed access.

Using This Pocket Door Kit In Cabinet Builds

Where This Inset Pocket Door System Fits Best

This inset pocket door system is categorized under shelf, closet and garage organization and multimedia and workspace components, so it aligns naturally with built-in cabinets for equipment, storage, or work areas that benefit from disappearing doors. The hardware functions as pocket door slides for applications where swing doors would block aisles or access to adjacent surfaces, giving designers an option to keep fronts closed when needed yet move doors completely out of the working envelope. With a minimum cabinet depth of 28-9/16 inches, it suits deeper cases often used for electronics, office equipment or storage modules that extend beyond standard kitchen depths. Door height support from 35-7/16 inches to 47-1/4 inches covers medium to tall cabinet fronts commonly found in entertainment centers, wall units and workspace storage, allowing a unified pocket treatment across a run of similar doors.

How Sugatsune Details Support Smooth, Repeatable Operation

The Sugatsune America ALT-ST15-D360L-28 layout combines 4 slides with 5-speed adjustable soft-closing dampers, which provides both guided motion and adjustable closing behavior for repeatable performance across doors in the same installation. The 4-slide arrangement stabilizes the door as it moves from the closed inset position into the pocket, helping the hardware manage taller fronts within the specified height range without excessive wobble. Adjustable soft-closing dampers let installers fine-tune how quickly doors settle into the frame, which supports different door weights and usage patterns in multimedia or workspace environments. Fittings designed to retract the door further into the cabinet than the ALTST20-D360 series keep door edges farther from the working area, which is important when users need full access to shelves, screens or equipment near the front. The defined manufacturer part number anchors these performance characteristics so shops can standardize on this specific pocket door behavior across multiple projects and locations.

Common Questions About This Pocket Door Hardware

Select This Kit For Inset Pocket Door Projects

The Sugatsune inset pocket door kit ALT-ST15-D360L-28 delivers an inset pocket door system built for cabinets with a minimum depth of 28-9/16 inches and doors from 35-7/16 inches to 47-1/4 inches, giving projects defined dimensional boundaries. Its 4 slides, 5-speed adjustable soft-closing dampers and fittings that allow further door retraction than the ALTST20-D360 series combine to support accessible, unobstructed cabinet openings in multimedia and workspace environments. For cabinet runs needing doors that disappear into the case while staying flush when closed, this pocket door hardware provides a consistent, repeatable solution.