Sugatsune Inset Pocket Door Kit, Min. Cab. Depth 19-1/2", Door Height 27-9/16" - 35-7/16", 2-Slides, Further Door Retraction, - ALT-ST15-D360M-19
Description
Sugatsune Inset Pocket Door Kit For Cabinets
Sugatsune inset pocket door kit gives cabinet doors a clean, inset pocket action so they can slide back into the cabinet instead of swinging into the workspace. This pocket door hardware uses an inset layout to keep the door flush with the cabinet face when closed, which helps projects where a smooth front is important. Minimum cabinet depth of 19-1/2 inches defines the carcass size this system is designed around, so casework can be planned confidently during layout. Door height from 27-9/16 inches to 35-7/16 inches sets the workable range, so medium-size doors can be engineered to fall directly within the system parameters. As a pocket door system, this setup is suited to multimedia and workspace components where doors need to disappear from the working area.
Key Pocket Door System Details For Projects
- The inset pocket door system configuration keeps doors aligned with the front of the cabinet when closed, which supports a finished, built-in appearance on entertainment or workspace installations.
- 5-speed adjustable soft-closing dampers manage the closing motion, which helps reduce door slamming and contributes to controlled, repeatable movement during everyday operation.
- Fittings that allow the door to retract further into the cabinet than the ALTST20-D360 series increase clear access to the opening, which is useful when the door needs to stay fully out of the working area.
- The pocket door hardware is classified as pocket door slides within pocket door hardware, which ties directly into standard planning for shelf, closet, garage, multimedia, and workspace cabinetry.
- Designation as a pocket door kit for inset applications helps align the product with projects that call for doors to both hide inside the cabinet and sit neatly within the face frame zone when closed.
Inset Pocket Door Installation And Fit Parameters
This inset pocket door system is built around a minimum cabinet depth of 19-1/2 inches, so cabinet interiors can be dimensioned to provide that depth from the outset. Door height compatibility from 27-9/16 inches to 35-7/16 inches defines the vertical envelope, which simplifies choosing or sizing doors to match the system. The assembly functions as pocket door slides within pocket door hardware, so it fits naturally into layouts where a sliding pocket action is needed instead of traditional hinges alone. As part of multimedia and workspace components, the inset pocket door arrangement helps create installations where doors move clear of monitors, tools, or equipment positioned in front of the cabinet.
How This Pocket Door Kit Works In Use
Where This Inset Pocket Door System Excels
This inset pocket door system is suited to projects in shelf, closet, and garage organization where a door needs to move completely out of the way while remaining part of the cabinet. In multimedia and workspace components, the ability for the door to retract further into the cabinet than the ALTST20-D360 series opens up more usable space in front of the unit, which is helpful around screens, work surfaces, or equipment. The defined minimum cabinet depth of 19-1/2 inches means typical multimedia and storage cabinets that meet this depth can be planned around the system without rethinking basic construction. Door height coverage from 27-9/16 inches to 35-7/16 inches also aligns with many mid-height doors, which supports consistent sizing across a bank of cabinets using the same pocket door hardware.
Details That Support Smooth, Repeatable Operation
The inset pocket door system uses 5-speed adjustable soft-closing dampers to control the final part of travel, which supports quieter, more predictable closing cycles during repeated use. This level of damping control helps limit shock on the door and cabinet when users close the door at different speeds. Fittings that pull the door further into the cabinet than the ALTST20-D360 series contribute to better clearance at the front of the cabinet, which is valuable when installing in tight passages or work zones. The hardware is identified by manufacturer part number ALT-ST15-D360M-19, giving a precise reference for matching components across multiple cabinets or future projects. As pocket door slides within pocket door hardware, the system defines both motion and location of the door, which helps keep operation consistent from cabinet to cabinet.
Practical Questions About This Pocket Door Hardware
What cabinet depth does this inset pocket door kit work with?
The inset pocket door kit is designed for a minimum cabinet depth of 19-1/2 inches, which sets the interior dimension needed for proper slide and door travel.
What door height range suits this Sugatsune pocket door system?
The Sugatsune inset pocket door system supports doors from 27-9/16 inches to 35-7/16 inches tall, which helps standardize medium-height cabinet fronts in a run of casework.
How do the 5-speed adjustable soft-closing dampers help in daily use?
The 5-speed adjustable soft-closing dampers regulate closing motion, which helps reduce slamming and supports smoother, more controlled door action over repeated openings.
How does this system differ from the ALTST20-D360 series in operation?
This inset pocket door system uses fittings that let the door retract further into the cabinet than the ALTST20-D360 series, which increases clear front access during use.
What type of applications match this pocket door hardware?
This pocket door hardware is listed for shelf, closet, garage organization, and multimedia and workspace components, which suits cabinets where doors must move fully out of the way.
How does the inset design affect the cabinet appearance?
The inset design keeps the door aligned with the cabinet front when closed, which supports a clean, built-in look on entertainment or workspace cabinetry.
Selecting This Pocket Door System For Your Next Build
This Sugatsune inset pocket door kit brings together pocket door slides, an inset layout, and 5-speed adjustable soft-closing dampers around a defined 19-1/2 inch minimum cabinet depth and 27-9/16 to 35-7/16 inch door height range. Those fixed parameters help align cabinet construction, door sizing, and motion control on multimedia, storage, and workspace projects. For builds where doors need to retract further into the cabinet opening than the ALTST20-D360 series allows, this configuration provides that deeper retraction so working space in front of the cabinet stays open.