Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune ESR-8 Series 26 inch side-mount ball bearing drawer slide is built from 304 stainless steel for installations where a standard zinc-finished slide cannot hold up. With a 3/4 extension and a hold-in anti-rebound detent, it suits drawers in kitchens, food-prep areas, labs, and other environments where moisture and cleaning cycles put ordinary hardware at risk.
In most cabinetry, a zinc-finished ball bearing slide is the right call. But in environments where moisture is part of the job — food preparation, laboratory casework, marine cabinetry, healthcare facilities, and utility spaces that see regular cleaning — zinc plating eventually fails. The ESR-8's 304 stainless steel members hold up through repeated exposure to humidity and cleaning agents that would corrode a standard slide. If the space gets wet or needs to be wiped down routinely, stainless is the correct material choice, not a cosmetic upgrade.
The ESR-8 runs on ball bearings between formed stainless steel raceways, giving the drawer smooth, controlled travel under load. The 3/4 extension design opens the drawer most of the way — the rear portion stays inside the cabinet at full open, which is the right tradeoff when full rear access is not a requirement and a shallower cabinet footprint is preferred. The hold-in anti-rebound detent is a mechanical catch, not a spring and not a damper: it keeps the drawer in the closed position and stops it from rebounding after a firm close, but it does not pull the drawer shut or slow it down. The slide is standard-motion — drawer travel is free in both directions and the detent holds only at the closed position.
This slide is the right choice when the installation environment rules out standard zinc hardware. Commercial kitchen builders, lab furniture manufacturers, and marine outfitters working with drawers in the 26 inch depth range will find the ESR-8 covers the load class and closing behavior they need. It also suits residential applications — refrigerator drawers, under-sink storage, and garage cabinets in humid climates — where the owner wants hardware that outlasts the surrounding casework. At 59 lb per pair, the capacity is appropriate for moderate storage loads, not heavy industrial drawers. Non-handed design means one SKU covers both sides of every drawer.
The slide members are 304 stainless steel — not a coating or plating over carbon steel. The corrosion resistance comes from the base material itself.
No. The 26 inch figure is the closed slide length. At 3/4 extension the drawer opens roughly three-quarters of that length, leaving the rear section inside the cabinet. Slide length and drawer travel are two different specs.
It catches the drawer at the closed position and prevents it from bouncing back open after a firm push. It is not a soft-close damper and it does not pull the drawer shut — it simply holds the drawer in place until pulled.
Side clearance for the ESR-8 series is not stated in the available source data. Build the drawer box to Sugatsune's published specification for this series before cutting stock.
A complete drawer installation requires one slide per side — two slides total. Confirm the sold-as unit at checkout to ensure you receive a pair.
In the right environment, 304 stainless steel pays for itself by outlasting hardware that needs replacing. The Sugatsune ESR-8 in 26 inches delivers the load capacity, closing behavior, and corrosion resistance to keep utility and commercial drawers running reliably through years of hard use.