Fastedge peel and stick edgebanding is made from high quality real wood veneers, so the visible edge is genuine maple that blends into maple panels and doors. The prefinished surface means the edgebanding arrives ready to apply, which helps keep repair and touch-up work moving without a separate finishing step. The 15/16 inch width provides coverage for common three-quarter inch panels with a slight overhang, giving room to trim the edge cleanly for a crisp line. Each roll is 50 feet long, so one roll supports multiple cabinet runs, shelves, or repair spots on the same job. This edgebanding belongs to the Edge Banding product class and sits in the Edgebanding & Surfacing category, so it fits naturally into cabinet, furniture, and casework workflows that already use similar edge solutions.
This peel and stick edgebanding uses a high performance pressure sensitive acrylic adhesive on the backing, so the strip bonds as it is pressed into place along the substrate edge. The adhesive increases in strength as it cures, which supports a long lasting bond on cabinet and furniture edges that see regular use. Because the roll is 15/16 inch wide, there is intentional overhang relative to typical three-quarter inch cores, giving installers space to trim the excess flush after the strip is seated. The 50 foot length allows longer, continuous pulls along shelves or cabinet sides, which helps reduce seams on visible runs and streamline the edgebanding stage of a project.
Made from high quality real wood veneers, this maple Fastedge edgebanding fits jobs where exposed panel edges need to visually match maple faces, such as face-frame cabinets, frameless boxes, or shelves. The product is described as good for field repairs, so it supports on-site corrections where an edge is damaged or unfinished and needs a quick, clean maple cover. Suitability for inside and outside radii means the veneer and adhesive combination can follow gentle curves, so curved cabinet ends, shelving corners, or radius panels can receive a consistent maple edge. The same description calls out scribe tape applications, so installers can use narrow strips along walls or uneven surfaces, then trim the scribed edge to close small gaps while keeping a maple appearance.
The high performance pressure sensitive acrylic adhesive on the backing activates with applied pressure, so installers can position the strip and then press it down for immediate hold instead of working with wet contact cement. Because the adhesive increases in strength as it cures, the bond continues to tighten over time, which supports long term edge performance on cabinet doors, shelves, or casework that are opened, closed, or handled regularly. The peel and stick format simplifies the process to cutting, peeling, and pressing in place, which can shorten the time spent on each panel during production runs or field service work. The 50 foot roll length provides enough material for repeated scribe tape uses, inside and outside radii, and multiple field repairs on the same project, which helps keep the workflow consistent from first edge to last.
The Fastedge maple edgebanding is made from high quality real wood veneers, so the finished edge presents genuine maple grain that visually matches other maple components.
The maple Fastedge roll is 15/16 inch in width and 50 feet in length, providing slight overhang for trimming and enough material for multiple cabinet or shelving edges.
This peel and stick edgebanding uses a high performance pressure sensitive acrylic adhesive on the backing, which bonds under pressure and increases in strength as it cures.
The maple edgebanding is described as good for inside and outside radii, so it can follow curved cabinet ends or shelves while maintaining a continuous maple edge.
This Fastedge edgebanding is noted as good for field repairs, so it supports on-site edge fixes where a maple veneer edge is needed quickly.
The maple Fastedge tape is mentioned as good for field repairs, inside and outside radii, scribe tape, and many other applications in cabinet and woodworking projects.
The Fastcap Wood Edgebanding Fastedge Peel & Stick Prefinished 15/16 inch Width x 50FT - Maple combines real wood veneer, a prefinished maple face, and a pressure sensitive acrylic adhesive, so cabinet and woodworking projects gain a matching maple edge with a curing bond. The 15/16 inch width and 50 foot roll length support trimming flush on common panel thicknesses while covering multiple runs or repairs from a single roll. For installers and shops working with maple casework, this Fastedge edgebanding offers a straightforward way to handle straight runs, inside and outside radii, field repairs, and scribe tape tasks using one maple product.
Sold In: 1 Roll
